PSI - Issue 27

Hammar Ilham Akbar et al. / Procedia Structural Integrity 27 (2020) 30–37 Akbar et al. / Structural Integrity Procedia 00 (2019) 000 – 000

37

8

Gladston, J.A.K., Sheriff, N.M., Dinaharan, I., Raja Selvam, J.D. 2015. Production and characterization of rich husk ash particulate reinforced AA6061 aluminum alloy composites by compocasting. Transactions of Nonferrous Metals Society of China (English Edition) 25(3), 683 – 691. Harshavardhan, R., Anil, K.C., Rao, K.V.S. 2018. Evaluation of Fracture Toughness of Red Mud Reinforced Aluminium Matrix Composite. Materials Today: Proceedings 5(11), 24854 – 24861. Imran, M., Anwar Khan, A.R. 2018. Characterization of Agricultural Waste Sugarcane Bagasse Ash at 1100°C with various hours. Materials Today: Proceedings 5(2), 3346 – 3352. Joseph, O.O., Babaremu, K.O. 2019. Agricultural waste as a reinforcement particulate for aluminum metal matrix composite (AMMCs): A review. Fibers 7(4), 33. Kandpal, B.C., Kumar, J., Singh, H. 2017. Fabrication and characterisation of Al2O3/aluminium alloy 6061 composites fabricated by Stir casting. Materials Today: Proceedings 4(2), 2783 – 2792. Kutchko, B.G., Kim, A.G. 2006. Fly ash characterization by SEM-EDS. Fuel 85(17 – 18), 2537 – 2544. Madakson, P.B., Yawas, D.S., Apasi, A. 2012. Characterization of Coconut Shell Ash for Potential Utilization in Metal Matrix Composites for Automotive Applications. International Journal of Engineering Science and Technology 4(3), 1190 – 1198. Mallikarjuna, B.E., Shivanand, H.K., Reddy, H., Hanif Ahamadsab, M. 2017. Evaluation of Impact Properties of Fly Ash and S-Glass Reinforced Al-4046 Hybrid Metal Matrix Composites. Materials Today: Proceedings 4(11), 12285 – 12290. Nagaral, M., Shivananda, B.K., Auradi, V., Parashivamurthy, K.I., Kori, S.A. 2017. Mechanical Behavior of Al6061-Al2O3and Al6061-Graphite Composites. Materials Today: Proceedings 4(10), 10978 – 10986. Narasaraju, G., Raju, D.L. (2015). Characterization of Hybrid Rice Husk and Fly ash-Reinforced Aluminium alloy (AlSi10Mg) Composites. Materials Today: Proceedings 2(4 – 5), 3056 – 3064. Nizar, I.K., Al Bakri, A.M. M., Rafiza, A. R., Kamarudin, H., Alida, A., Zarina, Y. (2014). Study on physical and chemical properties of fly ash from different area in Malaysia. Key Engineering Materials 594 – 595, 985 – 989. Patel, S., Rana, R.S., Singh, S.K. 2017. Study on mechanical properties of environment friendly Aluminium E-waste Composite with Fly ash and E-glass fiber. Materials Today: Proceedings 4(2), 3441 – 3450. https://doi.org/10.1016/j.matpr.2017.02.233 Prastio, B., Seputro, H., Abdulrahim, M. 2017. The effect of electroless plating on aluminum metal matrix composite reinforcement bottom ash on the density and porosity for propeller applications. Springer Proceedings in Physic, 193, 77 – 84. Rao, R.G., Ghosh, M., Ganguly, R.I., Bose P.S.C., and Sahoo, K.L. 2020. Mechanical properties and age hardening response of Al6061 alloy based composites reinforced with fly ash. Materials Science and Engineering A 772, 138823. Ravikumar, K., Kiran, K., Sreebalaji, V.S. 2017. Characterization of mechanical properties of aluminium/tungsten carbide composites. Measurement: Journal of the International Measurement Confederation 102, 142 – 149. Reddy, B.R., Srinivas, C. 2018. Fabrication and Characterization of Silicon Carbide and Fly Ash Reinforced Aluminium Metal Matrix Hybrid Composites. Materials Today: Proceedings 5(2), 8374 – 8381. Satheesh, M., Pugazhvadivu, M. 2019. Investigation on physical and mechanical properties of Al6061-Silicon Carbide (SiC)/Coconut shell ash (CSA) hybrid composites. Physica B: Condensed Matter 572, 70 – 75. Seputro, H., Kastiawan, I.M., Utomo, G.P. 2017. Thermal properties of as-cast bottom ash reinforced aluminum metal matrix composite. Springer Proceedings in Physics 193, 253 – 264. Soltani, S., Khosroshahi, R.A., Mousavian, R.T., Jiang, Z.Y., Boostani, A.F., Brabazon, D. 2017. Stir casting process for manufacture of Al – SiC composites. Rare Metals 36(7), 581 – 590. Tiwari, S., Pradhan, M.K. 2017. Effect of rice husk ash on properties of aluminium alloys: A review. Materials Today: Proceedings 4(2), 486 – 495. Usman, I., Taiwo, A.B., Haratu, D., Abubakar, M.A. 2013. Socio-Economic Factors Affecting Groundnut Production in Sabongari Local Government of Kaduna State , Nigeria. International Journal of Food and Agricultural Economics 1(1), 41 – 48. Wang, H., Yi, Y., Huang, S. 2017. Investigation of quench sensitivity of high strength 2219 aluminum alloy by TTP and TTT diagrams. Journal of Alloys and Compounds 690, 446 – 452. Zahi, S., Daud, A. R. 2011. Fly ash characterization and application in Al-based Mg alloys. Materials and Design 32(3), 1337 – 1346.