PSI - Issue 20

A.K. Kychkin et al. / Procedia Structural Integrity 20 (2019) 198–205 A.K.Kychkin et al / Structural Integrity Procedia 00 (2019) 000 – 000

205

8

References

ACI 2006. ACI 440.1R-06: Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars, The American Concrete Institute, USA. ACI 2004. ACI 440.3R-04: Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures, The American Concrete Institute, USA/ CSA 2002. CAN/CSA-S806-02: Design and Construction of Building Components with Fibre-Reinforced Polymers, Canadian Standards Association, Canada. CSA 2006. CAN/CSA-S6-06: Canadian Highway Bridge Design Code, Canadian Standards Association, Canada. Japan Society of Civil Engineers (JSCE), “Recommendationsfor design and construction of con crete structures using continuous fibre reinforced materials,” in Research Committee on Continuous Fibre Reinforced Materials, A. Machida, Ed., JapanSociety of Civil Engineers (JSCE), Tokyo, Japan. CNR- DT 203/2006: Guide for the Design and Сonstruction of Concrete Structures Reinforced with Fiber-Reinforced Polymer Bars, Consiglio Nazionale Delle Ricerche. GOST 31938-2012 : Fibre-reinforced polymer bar for concrete reinforcement. General specifications, Moscow, Russia. GOST 32492-2015: Fiber-reinforced polymer bar for concrete reinforcement. Determination of physical-mechanical properties, Moscow, Russia. SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules, Moscow, Russia. Alaimo, G., Valenza, A., Enea, D and Fiore, V., 2016. The durability of basalt fibres reinforced polymer (BFRP) panels for cladding. Materials and Structures 49(6), 2053 – 2064. Ammar, M. A., 2014. Bond durability of basalt fiber-reinforced polymers (BFRP) bars under freeze-and-thaw conditions. Thesis, Quebec, Canada, pp. 105. Chikhradze, N.M., Japaridze, L.A. and Abashidze, G.S., 2012. Properties of basalt plastics and of composites reinforced by hybrid fibers in operating conditions. In: Composites and their applications, edited by Ning Hu, 243-268. Dhand, V., Mittal, G., Rhee, K. Y., Park, S.-J. and Hui, D., 2015. A short review on basalt fiber reinforced polymer composites. Composites Part B: Engineering,73(5), 166-180. Khalili, S.M.R., Najafi, M. and Farsani, R.E., 2017. Effect of thermal cycling on the tensile behavior of polymer composites reinforced by basalt and carbon fibers. Mechanics of Composite Materials, 52(6), 807-816. Li H., Xian G., Ma M.. and Wu J., 2012. Durability and fatigue performances of basalt fiber/epoxy reinforcing bars. Proc. of 6th Int. Conf. on FRP Composites in Civil Engineering, Rome, Italy, 8. Liu Q., Shaw M. T., Parnas R. S. and McDonnell A.-M., 2006. Investigation of basalt fiber composite mechanical properties for applications in transportation, Polymer Composites, 27, 41-48. Matykiewicz D., Lewandowski K. and Dudziec B., 2017. Evaluation of thermomechanical properties of epoxy – basalt fibre composites modified with zeolite and silsesquioxane. Composite Interfaces, 24, 5, 489-498. Najafi M., Khalili S.M.R., and Farsani R.E., 2016. Accelerated heat aging study of phenolic/basalt fiber reinforced composites. Mechanics of Advanced Composite Structures 3(1), 1-7. Pandian, A., Vairavan M., Thangaiah W. J. J. and Uthayakumar M., 2014. Effect of moisture absorption behavior on mechanical properties of basalt fibre reinforced polymer matrix com posites», Journal of Composites 2014, 587980. Parnas, R., Shaw, M and Liu, Q., 2007. Basalt fiber reinforced polymer composites. Technical Report NETCR63. Institute of Materials Science, University of Connecticut, 133. Refai, A.El., 2014. Durability and fatigue of basalt fiber-reinforced polymer bars gripped with steel wedge anchors. Journal of Composites for Construction, 19, 04014078. Refai, A. El, Abed F.; and Altalmas A., 2013. Bond durability of basalt fiber – reinforced polymer bars embedded in concrete under direct pullout conditions. Journal of Composites for Construction 18, 04013006. Startsev, V.O., Lebedev ,M.P., Kychkin, A.K., 2018. Influence of moderately warm and extremely cold climate on properties of basalt plastic armature. Heliyon 4(12), e01060. Wu, G., Wang, X., Wu, Z., Dong, Z. and Zhang, G., 2015. Durability of basalt fibers and composites in corrosive environments. Journal of Composite Materials 49, 873 – 887. Xie, Y., Guan, K. and Lai, L., 2016. Effect of chloride on tensile and bending capacities of basalt frp mesh reinforced cementitious thin plates under indoor and marine environments. International Journal of Polymer Science 2016, 7162313.