PSI - Issue 2_A

Junjing He et al. / Procedia Structural Integrity 2 (2016) 863–870 Junjing He / Structural Integrity Procedia 00 (2016) 000 – 000

870

8

Acknowledgements Financial support by the European Union (directorate-general for energy), within the project MACPLUS (ENER/FP7EN/249809/MACPLUS) in the framework of the Clean Coal Technologies is gratefully acknowledged. The authors would like to thank the China Scholarship Council (CSC) for funding a stipend for Junjing He.

References

Arai, M., T. Ogata and A. Nitta 1996. "Continuous observation of cavity growth and coalescence by creep-fatigue tests in SEM." The Japan Society of Mechanical Engineers 39(3): 382-388. Arzate, O. R. and L. Martinez 1988. "Creep cavitation in type 321 stainless steel." Material Science and Engineering A 101: 1-6. ASM 1991. "Properties and Selection: Nonferrous Alloys and Special-Purpose Materials." ASM Handbook 02. Beere, W. and M. V. Speight 1978. "Diffusive crack growth in plastically deforming solid." Met Sci 12(12): 593-599. Čermák, J. 1991. "Grain boundary self -diffusion of 51Cr and 59Fe in austenitic NiFeCr alloys." Materials Science and Engineering: A 148(2): 279-287. Chuang, T.-J., K. I. Kagawa, J. R. Rice and L. B. Sills 1979. "Overview no. 2: Non-equilibrium models for diffusive cavitation of grain interfaces." Acta Metallurgica 27(3): 265-284. Clark, C. L. 1953. "Hight temperature alloys (Hochwarmfeste Legierungen)." Pitman publishing corporation New York/Toronto/London. Davanas, K. and A. A. Solomon 1990. "Theory of intergranular creep cavity nucleation, growth and interaction." Acta Metallurgica et Materialia 38(10): 1905-1916. Dyson, B. F. 1976. "Constraints on diffusional cavity growth rates." Metal Science: 349-353. He, J., R. Sandström 2015. "Modelling grain boundary sliding during creep of austenitic stainless steels." Journal of Materials Science 51(6): 2926-2934. He, J., R. Sandström 2016. "Formation of creep cavities in austenitic stainless steels." Journal of Materials Science: 1-12. He, J., R. Sandström 2016. "Prediction of creep rupture strength for austenitic stainless steels." to be published. Hong, J. H., S. W. Nam and S. P. Choi 1986. "The influences of sulphur and phosphorus additions on the creep cavitation characteristics in type 304 stainless steels." Journal of Materials Science 21(11): 3966-3976. Laha, K., J. Kyono and N. Shinya 2010. "Suppression of creep cavitation in precipitation-hardened austenitic stainless steel to enhance creep rupture strength." Transactions of the Indian Institute of Metals 63(2-3): 437-441. Lim, L. C. 1987. "Cavity nucleation at high temperatures involving pile-ups of grain boundary dislocations." Acta Metallurgica 35(7): 1663 1673. Naumenko, K., H. Altenbach 2007. Constitutive Models of Creep. Modeling of Creep for Structural Analysis, Springer Berlin Heidelberg: 17-84. Needham, N. G. and T. Gladman 1980. "Nucleation and growth of creep cavities in a type 347 steel." Metal Science 14(2): 64-72. Needleman, A., J. R. Rice 1980. "Plastic creep flow effects in the diffusive cavitation of grain boudaries." Acta Metallurgica 28(10): 1315-1332. NIMS "NIMS creep data sheet for austenitic stainless steels." http://smds.nims.go.jp/creep/index_en.html. NRIM 1986. "Data sheet on the elevated-temperature properties of 18Cr-8Ni stainless steel for boiler and heat exchanger seamless tubes (SUS 304H TB)." National research institute for metals Tokyo, Japan(No.4B). NRIM 1987. "Data sheet on the elevated-temperature properties of 18Cr-10Ni-Ti stainless steel for boiler and heat exchanger seamless tubes (SUS 321H TB)." National research institute for metals Tokyo, Japan(No. 5B). Pitkänen, H., M. Alatalo, A. Puisto, M. Ropo, K. Kokko and L. Vitos 2013. "Ab initio study of the surface properties of austenitic stainless steel alloys." Surface Science 609: 190-194. Rice, J. R. 1981. "Constraints on the diffusive cavitation of isolated grain boundary facets in creeping polycrystals." Acta Metallurgica 29: 675 681. Riedel, H. 1987. The Cavity Size Distribution Function for Continuous Cavity Nucleation. Rupture Lifetimes and Density Changes. Fracture at High Temperatures, Springer Berlin Heidelberg: 225-241. Sandström, R. 2015. "Fundamental Models for Creep Properties of Steels and Copper." Transactions of the Indian Institute of Metals: 1-6. Sandström, R., M. Farooq and J. Zurek 2013. "Basic creep models for 25Cr20NiNbN austenitic stainless steels." Materials Research Innovations 17(5): 355-359. Sandström, R., R. Wu 2013. "Influence of phosphorus on the creep ductility of copper." Journal of Nuclear Materials 441(1-3): 364-371. SkleniČKa, V. 1997. THE SIGNIFICANCE OF INTERGRANULAR CAVITATION IN CREEP -FATIGUE. Advances in Fracture Research. B. L. Karihaloo, Y. W. Mai, M. I. Ripley and R. O. Ritchie. Oxford, Pergamon: 317-324. Sklenicka, V., P. Lukas and L. Kunz 1992. "Intercrystalline fracture in high-temperature creep, fatigue and cyclic creep of copper." Metallic Materials (English translation of Kovove Materialy) (Cambridge, Engl) 30: 160. TCS "TCS Alloy Mobility Database (MOB2)." Thermo-Calc Software AB Database segment: Iron and Steel. Vujic, S., R. Sandstrom and C. Sommitsch 2015. "Precipitation evolution and creep strength modelling of 25Cr20NiNbN austenitic steel." Materials at High Temperatures 32(6): 607-618.