PSI - Issue 19

Lloyd Hackel et al. / Procedia Structural Integrity 19 (2019) 452–462 Valentin LOURY--MALHERBE/ Structural Integrity Procedia 00 (2019) 000–000

462

11

[12] N. Kalentics, E. Boillat, P. Peyre, S. Ćirić-Kostić, N. Bogojević, and R. E. Logé, “Tailoring residual stress profile of Selective Laser Melted parts by Laser Shock Peening,” Addit. Manuf., vol. 16, pp. 90–97, 2017. [13] A. S. Gill, A. Telang, C. Ye, S. R. Mannava, D. Qian, and V. K. Vasudevan, “Localized plastic deformation and hardening in laser shock peened Inconel alloy 718SPF,” Mater. Charact., vol. 142, pp. 15–26, 2018. [14] S. Luo, L. Zhou, X. Nie, Y. Li, and W. He, “The compound process of laser shock peening and vibratory finishing and its effect on fatigue strength of Ti-3.5Mo-6.5Al-1.5Zr-0.25Si titanium alloy,” J. Alloys Compd., vol. 783, pp. 828–835, 2019. [15] M. Kattoura, S. R. Mannava, D. Qian, and V. K. Vasudevan, “Effect of laser shock peening on elevated temperature residual stress, microstructure and fatigue behavior of ATI 718Plus alloy,” Int. J. Fatigue, vol. 104, pp. 366–378, 2017. [16] M. Kattoura, S. R. Mannava, D. Qian, and V. K. Vasudevan, “Effect of laser shock peening on residual stress, microstructure and fatigue behavior of ATI 718Plus alloy,” Int. J. Fatigue, vol. 102, pp. 121–134, 2017. [17] L. Spadaro, G. Gomez-Rosas, C. Rubio-González, R. Bolmaro, A. Chavez-Chavez, and S. Hereñú, “Fatigue behavior of superferritic stainless steel laser shock treated without protective coating,” Opt. Laser Technol., vol. 93, pp. 208–215, 2017. [18] H. Masuo et al., “Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing,” Int. J. Fatigue, vol. 117, pp. 163–179, 2018. [19] G. Meneghetti, D. Rigon, and C. Gennari, “An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing,” Int. J. Fatigue, vol. 118, pp. 54–64, 2019. [20] B. Lozanovski et al., “Computational modelling of strut defects in SLM manufactured lattice structures,” Mater. Des., vol. 171, p. 107671, 2019. [21] N. O. Larrosa et al., “Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy,” Theor. Appl. Fract. Mech., vol. 98, pp. 123–133, 2018.

[22] “https://www.crpmeccanica.com/PDF/SLM-DMLS_INCONEL718_CRP.pdf.” [23] “http://www.specialmetals.com/assets/smc/documents/inconel_alloy 718.pdf.”