PSI - Issue 19

R.B. Kalombo et al. / Procedia Structural Integrity 19 (2019) 688–697 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

697

10

Amazonense de Transmissão de Energia, AETE Amazonia Eletronorte Transmissora de Energia (AETE), Transmissora Matogrossense de Energia (TME) and of Finatec. The support of CNPq is also acknowledged.

References

Chan, J., 2006. EPRI Transmission Line Reference Book: Wind-Induced conductor motion, Electric Power Research Institute, Palo Alto, California. Fadel, A.A., Rosa, D., Murça, L.B., Ferreira, J.L.A., Araújo, J.A., 2012. Effect of High Mean Tensile Stress on The Fretting Fatigue Life of an Ibis Steel Reinforced Aluminium Conductor, International Journal of Fatigue 42, 24-34. IEEE, 2007. Guide for Aeolian Vibration Field Measurements of Overhead Conductors. Cardou, A., Cloutier, L., St-Louis M., Leblond, A., 1992. ACSR Electrical Conductor Fretting Fatigue at Spacer Clamps, M. Helmi Attia, R.B. Waterhouse (Eds.), Standardisation of Fretting Fatigue Test Methods and Equipment, 231-242. Volker, F.S., Kalombo, R.B., Cosme, R.M.S., Nogueira, M.N., Araújo, J.A., 2014. Effect of Chromium Nitride Coatings and Cryogenic Treatments on Wear and Fretting Fatigue Resistance of Aluminium, Electric Power Systems Research 116, 322-329. CIGRÉ WG 04 SC 22 - 02, 1979. Recommendations for the Evaluation of The Lifetime of Transmission Line Conductors, Electra 63, 103-145. Barrett, J.S., Motlis, Y., 2001. Allowable Tension Levels for Overhead Line Conductors, IEE Proceedings – Generation, Transmission and Distribution 148, 54-59. IEEE, STD 1368, 2006. Guide for Aeolian Vibration Field Measurements of Overhead Conductors. CIGRÉ Report 273, 2005. Overhead Conductor Safe Design Tension With Respect to Aeolian Vibrations, Task Force B2.11.04, CIGRÉ. Norma ASTM B398/B398M – 02, Reapproved 2007.Aluminum-Alloy 6201-T81 Wire for Electrical Purposes, Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States. Silva, B.L., Araújo, J.A., Ferreira, J.L.A., 2010. High-Cycle Notch Sensitivity of Alloy Steel ASTM A743 CA6NM Used in Hydrogenator Turbine Components, Frattura Ed Integrità Strutturale 14, 36-44. Loredo-Souza, A.M., Davenport, A.G., 1998. The Effects of High Winds on Transmission Lines, Journal of Wind Engineering and Industrial Aerodynamics 74-76, 987-994. Kiessling, F., Nefzger, P., Kaintzyk, U., Nolasco, J.F., 2003. Overhead Power Lines: Planning, Design, Construction, Spring. Poffenberger, J.C., Swart, R.L., 1965. Differential Displacement and Dynamic Conductor Strain, IEEE Transactions 84, 281-289. Papailiou, K.O., 1997. On the Bending Stiffness of Transmission Line Conductors, IEEE Transactions on Power Delivery 12, 1576-1588. Papailiou, K.O., 1995. Improved Calculations of Dynamic Conductor Bending Stresses Using A Variable Bending Stiffness, CIGRÉ SC 22 WG11, Madrid. Kalombo, R.B., Martínez, J.M.G., Ferreira, J. L.A., Da Silva, C.R.M., Araújo, J.A., 2015. Comparative Fatigue Resistance of Overhead Conductors Made of Aluminium and Aluminium Alloy: Tests and Analysis, Fatigue Design 133, 223-232. Kalombo, R.B., Pestana, M.S., Ferreira, J.L.A, C.R.M. Da Silva, J.A. Araújo, 2017. Influence of the Catenary Parameter ( H/w ) On the Fatigue Life of Overhead Conductors, Tribology International 108, 141-149.