PSI - Issue 19

Bodai,M et al. / Procedia Engineering 00 (2019) 000 – 000

9

Masaru Bodai et al. / Procedia Structural Integrity 19 (2019) 64–72

72

Acknowledgements

The experimental test program that performed large-scale fatigue tests, including small-specimen tests, was carried out as a collaborative program organized by the Kansai Electric Power Co., Inc., Hokkaido Electric Power Co., Inc., Tohoku Electric Power Co., Inc., Chubu Electric Power Co., Inc., Hokuriku Electric Power Company, the Chugoku Electric Power Co., Inc., Shikoku Electric Power Co., Inc., Kyushu Electric Power Co., Inc., Electric Power Development Co., Ltd., Mitsubishi Heavy Industries, Ltd., Toshiba Corporation, and Hitachi-GE Nuclear Energy, Ltd. with the support of the Central Research Institute of Electric Power Industry, IHI Corporation, and Hitachi, Ltd. The DFC1 and DFC2 Subcommittees of the Japan Welding Engineering Society instructed this test program. The authors of this paper would like to acknowledge the organizations involved in the collaborative program and the members of the DFC1 and DFC2 Subcommittees. JSME S NC1-2016, Codes for Nuclear Power Generation Facilities, Rules on Design and Construction for Nuclear Power Plants, The First Part I: Light Water Reactor Structural Design Standard, The Japan Society of Mechanical Engineers, December 2016. (in Japanese). NUREG/CR-6909, Effect of LWR Coolant Environments on Fatigue Life of Reactor Materials (Final Report), ANL-06/08, U.S. Nuclear Regulatory Commission, February 2006. ASME Boiler and Pressure Vessel Code, Section III, Rules for Construction of Nuclear Power Plant Components, American Society of Mechanical Engineers. Asada, S., Zhang, S., Takanashi, M., Nomura, Y., 2019, Study on Incorporation of a New Design Fatigue Curve into the JSME Environmental Fatigue Evaluation Method, PVP2019-93273, American Society of Mechanical Engineers. Asada, S., Hirano, A., Itatani, M., Yasuda, M., Sera, T., Kobayashi, H., 2013, Plan and Status of Development of Design Fatigue Curves (Phase 1), PVP2013-97767, American Society of Mechanical Engineers. Asada, S., Hirano,T, Sera,T., 2015, Study on a New Design Fatigue Evaluation Method, PVP2015-45089, American Society of Mechanical Engineers. Asada, S., Hirano,A., Saito,T.,Takada,Y.,Kobayashi,H.,2018., Development of New Design Fatigue Curves in Japan - Proposal of a new fatigue evaluation method -, PVP2018-84432, American Society of Mechanical Engineers. Bodai, M., Fukuta,Y., Asada, S., Takada,Y., 2018, Development of New Design Fatigue Curves in Japan - Discussion of Best-Fit Curves Based on Fatigue Test Data with Large Scale Piping -, PVP2018-84436, American Society of Mechanical Engineers. Takanashi, M., Ueda,H., Satio,T., Ogawa,T., Hayashi,K., 2018, Development of New Design Fatigue Curves in Japan - Discussion of Best-Fit Curves Based on Large-Scale Fatigue Tests of Carbon and Low-Alloy Steel Plates -, PVP2018-84456, American Society of Mechanical Engineers. Wang, Y., Hatoh, H., Yamamoto, M., Nakane, M., Hirano, A., Hayashi, K., 2018, Development of New Design Fatigue Curves in Japan – Discussion of Best Fit Curves Based on Fatigue Test Data with Small Test Specimen – , PVP2018-84052, American Society of Mechanical Engineers. Bodai, M., Fukuta,Y., Asada, S., Hayashi, K., 2019, Development of New Design Fatigue Curves in Japan - Discussion of Fatigue Crack Growth Based on Fatigue Test Data with Large Scale Piping -, PVP2019-93272, American Society of Mechanical Engineers. Kanasaki, H., Higuchi, M., Asada,S.,Yasuda,M.,Sera,T.,2013, Proposal of Fatigue Life Equations for Carbon & Low Alloy Steels and Austenitic Stainless Steels as a Function of Tensile Strength, PVP2013-97770, American Society of Mechanical Engineers. Shiratori, M., Analysis of Stress Intensity Factor due to Surface Crack by Using Influence Function Method, Training Session Text Book of the Japan Society of Mechanical Engineers, No.900-2, p.1, 1990. (in Japanese). JSME S NA1-2016, Codes for Nuclear Power Generation Facilities, Rules on Fitness-for Service for Nuclear Power Plants, The Japan Society of Mechanical Engineers, December 2016. (in Japanese). References