PSI - Issue 14

Santosh Kumar et al. / Procedia Structural Integrity 14 (2019) 872–882 Santosh / Structural Integrity Procedia 00 (2018) 000–000

882

11

work. Authors would also like to express special thanks to Suhas Patil, Afroz Shaikh & Sandip Sutar for their continuous support during project. References Lawley, A., Doherty, R., 1998. Spray Forming, in “ ASM handbook Volume 7 - Powder metal technologies and applications ”. In: Lee, P. (Ed.). ASM International, pp. 924-926. Lin,Y., Mchugh, K., Park, Y., Zhou, Y., Lavernia, E., 2007. Modeling the spray forming H13 steel tooling. Metallurgical and Materials transactions A 38A, 1632-1637. Catto, F., Yonamine, T., Kiminami, C., Afonso, C., Botta, W., Bolfarini, C., 2011. Amorphous phase formation by spray forming of alloys [(Fe0.6Co0.4)0.75B0.2Si0.05] 96Nb4 and Fe66B30Nb4 modified with Ti. Journal of Alloys and Compounds 509, 148-154. Lin,Y., Mchugh, K., Park, Y., Zhou, Y., Lavernia, E., 2005. Microstructure and mechanical properties of Spray formed H13 tooling. 134 th Annual Meeting and Exhibition - The Mineral, Metals & Material Society, 1-7. Schruff, I., Schuler, V., Speigelhauer, C.,2002. Advanced tool steels produced via spray forming. 6 th International Tooling Conference, 1159-1179. Speigelhauer, C., Andersen, T., Shaw, L., Oakes, G., 1999. Pilot and demonstration project for spray forming round steel products. Technical Steel Research. Yang, Y., Hannula, S., 2008. Development of precision spray forming for rapid tooling. Material Science and Engineering A 477, 63-68. Grant, P., 2007. Solidification in spray forming. Metallurgical and Materials transactions A 38A, 1520-1529. Philip, T., McCaffrey, T., 2005. Carbon and Low-Alloy Steels, in “ ASM handbook Volume 1 - Properties and selection Iron, steel and alloy material” . In: Zorc, T., Lampman, H. (Ed.). ASM International, pp. 728. Caliskanoglu, D., Siller, I., Ebner, R., Leitner, H., Jeglitsch, F., Waldhauser, W., 2002. 6 th International Tooling Conference, Karlstads, 707. Zurine, A., Leire, M., Inaki, P., Stefan, L., 2015. METAL 2015, Czech Republic. Shivpuri, R., Babu, S., 2005. Die Wear, in “ ASM Handbook Volume 14A - Metalworking: Bulk Forming” . In: Semiatin, S. (Ed.). ASM International, pp. 62-83. Mellouli, D., Haddar, N., Koster, A., Ayedi, H., 2014. Hardness effect on thermal fatigue damage of hot-working tool steel. Engineering Failure Analysis 45, 85-95. Patil, S., Kirwai, S., Kumar, S., Patil, A., Mane, R., 2015. Comparison of low cycle behaviour of AISI H13 treated using different hardening process. Materials Innovation in Surface Engineering. Patil, S., Kirwai, S., Kumar, S., Patil, A., Mane, R., 2016. Study of low cycle flexural fatigue performance of different hot forging tool steel. 7th International Conference on Creep, Fatigue and Creep-Fatigue Interaction, 327-332. Dieter, G., 1988. “Mechanical Metallurgy” . In: Bever, M. (Ed.). McGraw-Hill Book Company, London, pp. 394-395. Ravichandran, K., Vasudevan, A.,1997. Fracture Resistance of Structural Alloys, in “ASM handbook Volume 19 - Fatigue and Fracture” . In: Lampman, S. (Ed.). ASM International, pp. 940-944. Cao, R., Li, G., Fang, X., Song, J., Chen, J., 2013. Investigation on the effects of microstructure on the impact and fracture toughness of a C-Mn steel with various microstructures. Material Science & Engineering A 564, 509-524. Takebayashi, S., Ushioda, K., Yoshinaga, N., Ogata, S., 2013. Effect of carbide size distribution on the Impact Toughness of Tempered Martensitic Steels with Two Different Prior Austenite Grain Sizes Evaluated by Instrumented Charpy Test. Materials transactions 54, 1110 1119. Karaaslan, A., Akca, C., 2009. The influence of carbide contribution on the properties of hot work tool steel. Metal 2009. Souki, I., Delagnes, D., Lours, P., 2011. Influence of heat treatment on the fracture toughness and crack propagation of 5% Cr martensitic steel. Engineering Procedia 10, 631-637. Vishnevsky, C., Steigerwald, E., 1968. Influence of alloying elements on the toughness of low alloy martensitic high strength steels. Technical report AMMRC. Sitek, W., Trzaska, J., 2011. Numerical simulation of the alloying elements effect on steels properties. Journal of Achievements in Materials and Manufacturing Engineering 45, 71-78. Kumar, S., Patil, S., Jadhav, P., Kirwai, S., Patil, A., Singh, R., 2017. An evaluation of fracture toughness and fatigue crack growth behavior of die steels. 4 th International Congress on Technology Engineering & Science, 328-336.