PSI - Issue 14

Arun Kumar Singh et al. / Procedia Structural Integrity 14 (2019) 720–728 Arun Kumar Singh et al./ Structural Integrity Procedia 00 (2018) 000–000

728

9

Manohar, M., Joseph, J., Selvaraj, T., Sivakumar, D., 2013. “Application of Box Behnken design to optimize the parameters for turning Inconel 718 using coated carbide tools” International Journal of Scientific and Engineering Research 4(4), 620-641. Oosterom, R., Ahmed, T.J., Poulis, J.A., Bersee, H.E., 2006. “Adhesionperformance of UHMWPE after different surfacemodification techniques” Medical Engineering Physics 28, 323–330. Ozcoban, H., Jelitto, H., Schneider, G. A., 2010.“Influence of finite notch root radius and optically determined crack length on the measured fracture toughness of brittle materials” J. European Ceramic Society 30(7), 1579–1583. Pei, Z. R., 2008.“Interlaminar Fracture Properties of Multi-Layer Woven Silk Fibre/Polyester Composites” Asian J. Applied Science 2, 177-184. Pinto, M., Chalivendra, V. B., Kim, Y. K. and Lewis, A. F., 2016.“Improving the strength and service life of jute / epoxy laminar composites for structural applications” Composite Structure 156, 333–337. Porras, A., Tellez, J., Rodriguez,J.P., 2012.“Delamination toughness of ultra high molecular weight polyethylene (UHMWPE) composites” EPJ Web of Conferences. Prasad, N. E.,Dakshinamurthy, K., Kamat, S. V., and Vijayakumar, M., 2005. “Flexural behaviour of 2D silica – silica continuous fibre reinforced, ceramic matrix composites” Transactions of Indian Institute of Metals 58, 883-895. Picard, D., Leguillon, D.,Putot, C., 2006.“A method to estimate the influence of the notch-root radius on the fracture toughness measurement of ceramics” J. European Ceramic Society26(8), 1421–1427. Ravand, M., Teo, W. S., Tran, L. Q. N., Yong, M. S., and Tay, T. E., 2016.“The effects of through-thethickness stitching on the Mode I interlaminar fracture toughness of flax/epoxy composite laminates” Materials and Design 109, 659–669. Shubhra, Q.T., Alam A., Quaiyyum M., 2011.“Mechanical properties of polypropylene composites: a review” J Thermoplastic Composite Materials 26, 362–391. Sui, G., Zhong, W.H., Ren, X., Wang, X.Q., Yang, X.P., 2009.“Structure, mechanical properties and friction behavior of UHMWPE/HDPE/carbon nanofibers” Materials Chemistry Physics 115, 404–412. Steven, P. B., Berube, K. A., Lopez, R. A., 2011. “Interlaminar fracture toughness of woven E-glass fabric composites” Journal of Composite Materials 46(13),1583-1592. Vairamani, G., Senthil, K., Malarvizhi, S., Balasubramanian,2013.“Application of response surface methodlogy to maximize tensile strength and minimize interface hardness of friction welded dissimilar joints of austenitic stainless steel and copper alloy” Transaction of nonferrous metals society of chaina, Science direct. Wang, K. H., 2004.“Dual- structure helmet and method of manufacturing the same” Patent US 6676884. Xian, K. Z., James, A. J., 2012.“Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization” Engineering Fracture Mechanics 85, 1-46.