PSI - Issue 13

Wenbo Sun et al. / Procedia Structural Integrity 13 (2018) 1020–1025 Author name / Structural Integrity Procedia 00 (2018) 000–000

1025

6

References

P. Edwards, M. Ramulu. Effect of build direction on the fracture toughness and fatigue crack growth in selective laser melted Ti-6Al-4V. Fatigue Fract Engng Mater Struct. 2015, 38 1228-1236. M. Srinivas, B. Sridhar Babu. A critical review on recent research methodologies in additive manufacturing. Materials Today. 4 (2017) 9049-9059. K. F. Walker, Q. Liu, M. Brandt. Evaluation of fatigue crack propagation behaviour in Ti-6Al-4V manufactured by selective laser melting. International Journal of Fatigue. 104 (2017) 302–308 Amanda J. Sterling, Brian Torries, Nima Shamsaei, et al. Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V. Materials Science & Engineering A. 655 (2016) 100–112 Yuwei Zhai, Diana A. Lados, Eric J. Brown, et al. Fatigue crack growth behavior and microstructural mechanisms in Ti-6Al-4V manufactured by laser engineered net shaping. International Journal of Fatigue. 93 (2016) 51–63 Yuwei Zhai, Haize Galarraga, Diana A. Lados. Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM. Engineering Failure Analysis. 69 (2016) 3–14 Daniel Greitemeier, Frank Palm, Freerk Syassen, et al. Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting. International Journal of Fatigue. 94 (2017) 211–217 J. Gunther, D. Krewerth, T. Lippmann, et al. Fatigue life of additively manufactured Ti-6Al-4V in the very high cycle fatigue regime. International Journal of Fatigue. 94 (2017) 236–245 M. Benedeti, V. Fontanari, M. Bandini, et al. Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: Mean stress and defect sensitivity. International Journal of Fatigue. 107 (2018) 96–109 Imade Koutiri, Etienne Pessard, Patrice Peyre, et al. Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts. Journal of Materials Processing Technology (2010), 2017.12.043 Hualiang Wan, Qizhi Wang, Chenxue Jia, et al. Multi-scale damage mechanics method for fatigue life prediction of additive manufacture structures of Ti-6Al-4V. Materials Science & Engineering A. 669 (2016) 269–278 Eric Wycisk, Andreas Solbach, Shafaqat Siddique, et al. Effects of Defects in Laser Additive Manufactured Ti-6Al-4V on Fatigue Properties. Physics Procedia. 56 (2014) 371 – 378 Yong Xie, Ming Gao, Fude Wang, et al. Anisotropy of fatigue crack growth in wire arc additive manufactured Ti-6Al-4V. Materials Science & Engineering A. 709(2018)265-269 Z. H. Jiao, R. D. Xu, H. C. Yu, et al. Evaluation on tensile and fatigue crack growth performances of Ti-6Al-4V alloy produced by selective laser melting. Procedia Structural Integrity. 7(2017)124-132 Khalil Farhangdoost, James W. Provan. A stochastic systems approach to fatigue reliability-an application to Ti-6Al-4V. Engineering Fracture Mechanics.53(1996)687-706