PSI - Issue 82

J. Blankenhagen et al. / Procedia Structural Integrity 82 (2026) 37–43

43

Blankenhagen et al. / Structural Integrity Procedia 00 (2026) 000–000

7

Acknowledgements

This study was funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – Project number 414265976 – TRR 277.

References

Alsalla, H.H., Smith, C., Hao, L., 2018. E ff ect of build orientation on the surface quality, microstructure and mechanical properties of selective laser melting 316l stainless steel. Rapid Prototyping Journal 24, 157–166. doi: 10.1108/RPJ-04-2016-0068 . ASTM International, 2023. Astm e647 – standard test method for measurement of fatigue crack growth rates. doi: 10.1520/E0647-23 . aSTM International, West Conshohocken, PA. Berns, H., Gavriljuk, V.G., Nabiran, N., Petrov, Y.N., Riedner, S., Trophimova, L.N., 2010. Fatigue and structural changes of high interstitial stainless austenitic steels. Steel Research International 81, 299–307. doi: 10.1002/srin.200900142 . Berns, H., Gavriljuk, V.G., Riedner, S., 2013. High Interstitial Stainless Austenitic Steels. Springer, Berlin, Heidelberg. Blankenhagen, J., Diller, J., Siebert, D., Hegele, P., Radlbeck, C., Mensinger, M., 2025. Material characterization of (c + n) austenitic stainless steel manufactured by laser powder bed fusion. Metals 15, 134. URL: http://dx.doi.org/10.3390/met15020134 , doi: 10.3390/ met15020134 . Blinn, B., Klein, M., Beck, T., 2018. Determination of the anisotropic fatigue behaviour of additively manufactured structures with short-time procedure phybal lit, in: 12th International Fatigue Congress (FATIGUE 2018) — MATEC Web of Conferences, Vol. 165, p. 02006. doi: 10. 1051/matecconf/201816502006 . Charmi, A., Falkenberg, R., A´ vila, L., Mohr, G., Sommer, K., Ulbricht, A., Sprengel, M., Saliwan Neumann, R., Skrotzki, B., Evans, A., 2021. Me chanical anisotropy of additively manufactured stainless steel 316l: An experimental and numerical study. Materials Science and Engineering: A 799, 140154. URL: http://dx.doi.org/10.1016/j.msea.2020.140154 , doi: 10.1016/j.msea.2020.140154 . Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG, 2020. Printdur ® hsa: High-strength, stainless, austenitic steel for additive manufactur ing. URL: https://www.dew-powder.com/additive-fertigung/printdur-hsa . online resource. Diller, J., Siebert, D., Radlbeck, C., Mensinger, M., 2022. Pbf-lb / m / 316l vs. hot-rolled 316l – comparison of cyclic plastic material behavior. Procedia Structural Integrity 42, 58–65. URL: http://dx.doi.org/10.1016/j.prostr.2022.12.006 , doi: 10.1016/j.prostr.2022. 12.006 . Fergani, O., Wold, A.B., Berto, F., Brøtan, V., Bambach, M., 2018. Study of the e ff ect of heat treatment on fatigue crack growth behaviour of 316L stainless steel produced by selective laser melting. Fatigue & Fracture of Engineering Materials & Structures 41, 1102–1119. doi: 10.1111/ ffe.12611 . Gavriljuk, V.G., Tyshchenko, A.I., Bliznuk, V.V., Yakovleva, I.L., Riedner, S., Berns, H., 2008. Cold work hardening of high-strength austenitic steels. Steel Research International 79, 413–422. doi: 10.1002/srin.200806147 . Kluczyn´ski, J., S´ niez˙ek, L., Grzelak, K., Torzewski, J., Szachogłuchowicz, I., Wachowski, M., Łuszczek, J., 2020. Crack growth behavior of additively manufactured 316l steel—influence of build orientation and heat treatment. Materials 13, 3259. URL: https://www.mdpi.com/ 1996-1944/13/15/3259 , doi: 10.3390/ma13153259 . Krakhmalev, P., Fredriksson, G., Svensson, K., Yadroitsev, I., Yadroitsava, I., Thuvander, M., Peng, R., 2018. Microstructure, solidification texture, and thermal stability of 316 l stainless steel manufactured by laser powder bed fusion. Metals 8, 643. URL: http://dx.doi.org/10.3390/ met8080643 , doi: 10.3390/met8080643 . Masoumi, M., Rahmati, S., Dalmoˆnico, G.M.L., Tochiro, L.A., 2023. Microstructural evolution and twin formation under tensile testing of ni-free mn–n austenitic stainless steel using the laser powder bed fusion method. Materials Letters 341, 134243. doi: 10.1016/j.matlet.2023. 134243 . Mu´jica Roncery, L., 2010. Development of high-strength, corrosion-resistant austenitic TWIP steels with C + N. Ph.D. thesis. Ruhr University Bochum, Faculty of Mechanical Engineering. Bochum, Germany. van Nuland, T.F.W., van Dommelen, J.A.W., Geers, M.G.D., 2021. Microstructural modeling of anisotropic plasticity in large-scale additively manufactured 316l stainless steel. Mechanics of Materials 153, 103664. doi: 10.1016/j.mechmat.2020.103664 . Reschetnik, W., Kullmer, G., Richard, H.A., 2019. Ermu¨dungsrisswachstumsverhalten bei zyklischer Belastung von laserstrahlgeschmolzenen 3D-gedruckten“ Werksto ff en: TiAl6V4, AlSi10Mg und 316L. Springer Fachmedien Wiesbaden. p. 157–170. doi: 10.1007/ 978-3-658-27412-2_10 . Riedner, S., 2011. Ho¨chstfeste nichtrostende austenitische CrMn-Sta¨hle mit (C + N). doctoralthesis. Ruhr-Universita¨t Bochum, Univer sita¨tsbibliothek. https: // hss-opus.ub.ruhr-uni-bochum.de / opus4 / frontdoor / deliver / index / docId / 2486 / file / diss.pdf. Riemer, F.A., Riemer, A., K., W.D., G., K.A., 2016. Fatigue crack growth in additive manufactured products. Frattura ed Integrita` Strutturale 34, 437–446. URL: https://www.fracturae.com/index.php/fis/article/view/1601/1626 , doi: 10.3221/IGF-ESIS.34.49 . Schymura, M., 2017. Untersuchungen zum Ermu¨dungsverhalten lo¨sungsgeglu¨hter austenitischer (Cr)Mn-Sta¨hle mit C und N. doctoralthesis. Ruhr-Universita¨t Bochum, Universita¨tsbibliothek. URL: https://nbn-resolving.org/urn:nbn:de:hbz:464-20171011-140632-4 . Shanina, B.D., Gavriljuk, V.G., Berns, H., Schmalt, F., 2002. Concept of a new high-strength austenitic stainless steel. Steel Research 73, 105–113. doi: 10.1002/srin.200200181 . Suryawanshi, J., Prashanth, K., Ramamurty, U., 2017. Mechanical behavior of selective laser melted 316l stainless steel. Materials Science and Engineering: A 696, 113–121. doi: 10.1016/j.msea.2017.04.058 .