PSI - Issue 82

Katarina Monkova et al. / Procedia Structural Integrity 82 (2026) 107–111 Katarina Monkova et al. / Structural Integrity Procedia 00 (2021) 000–000

111

5

Matušů, M., et al., 2024. Fatigue analysis of additively manufactured specimens from AlSi10Mg with different levels of powder recycling, Procedia Structural Integrity 54, 135-142, https://doi.org/10.1016/j.prostr.2024.01.065. Mishra, A.K., Kumar, A., 2023. Performance of asymmetric octet lattice structures under compressive and bending loads, Engineering Failure Analysis 154, 107669, https://doi.org/10.1016/j.engfailanal.2023.107669. Monkova, K, et al., 2025. A Preliminary Study of the Effect of 3D Printing Orientation on Mechanical Properties and Fracture of Samples Made from AlSi10Mg. Materials 18, 5294. https://doi.org/10.3390/ma18235294. Monkova, K. et al., 2023. Effect of Relative Weight on Compression Behaviour of 3D Printed Porous Structure Made of Aluminium Alloy, Key Engineering Materials, 964, 103-107, doi.org/10.4028/p-Y8sYkZ. Monkova, K.; et al., 2023. Experimental Study of the Bending Behaviour of the Neovius Porous Structure Made Additively from Aluminium Alloy. Aerospace 10, 361. Papuga, J., et al., 2024. Multiaxial fatigue analysis of additively manufactured hollow specimens from AlSi10Mg, Procedia Structural Integrity 57, 79-86, https://doi.org/10.1016/j.prostr.2024.03.010.