PSI - Issue 39

A. Zafra et al. / Procedia Structural Integrity 39 (2022) 128–138 Author name / Structural Integrity Procedia 00 (2019) 000–000

138

11

[6] Y. Murakami, R.O. Ritchie, Effects of hydrogen on fatigue-crack propagation in steels, Gaseous Hydrog. Embrittlement Mater. Energy Technol. Probl. Its Characterisation Eff. Part. Alloy Classes. (2012) 379–417. https://doi.org/10.1533/9780857093899.2.379. [7] A. Alvaro, D. Wan, V. Olden, A. Barnoush, Hydrogen enhanced fatigue crack growth rates in a ferritic Fe- 3 wt% Si alloy and a X70 pipeline steel, Eng. Fract. Mech. 219 (2019) 106641. https://doi.org/10.1016/j.engfracmech.2019.106641. [8] K.A. Nibur, B.P. Somerday, Fracture and fatigue test methods in hydrogen gas, Gaseous Hydrog. Embrittlement Mater. Energy Technol. Probl. Its Characterisation Eff. Part. Alloy Classes. (2012) 195–236. https://doi.org/10.1533/9780857093899.2.195. [9] R.P. Gangloff, B.P. Somerday, Gaseous Hydrogen Embrittlement of Materials in Energy Technologies: Mechanisms, Modelling and Future Developments, Woodhead Publishing, 2012. https://doi.org/10.1533/9780857095374. [10] L. Briottet, I. Moro, M. Escot, J. Furtado, P. Bortot, G.M. Tamponi, J. Solin, G. Odemer, C. Blanc, E. Andrieu, Fatigue crack initiation and growth in a CrMo steel under hydrogen pressure, Int. J. Hydrogen Energy. 40 (2015) 17021–17030. https://doi.org/10.1016/j.ijhydene.2015.05.080. [11] K. Tazoe, S. Hamada, H. Noguchi, Fatigue crack growth behavior of JIS SCM440 steel near fatigue threshold in 9-MPa hydrogen gas environment, Int. J. Hydrogen Energy. 42 (2017) 13158–13170. https://doi.org/10.1016/j.ijhydene.2017.03.223. [12] A. Macadre, M. Artamonov, S. Matsuoka, J. Furtado, Effects of hydrogen pressure and test frequency on fatigue crack growth properties of Ni–Cr–Mo steel candidate for a storage cylinder of a 70MPa hydrogen filling station, Eng. Fract. Mech. 78 (2011) 3196– 3211. https://doi.org/10.1016/j.engfracmech.2011.09.007. [13] J. Yamabe, H. Matsunaga, Y. Furuya, S. Hamada, H. Itoga, M. Yoshikawa, E. Takeuchi, S. Matsuoka, Qualification of chromium molybdenum steel based on the safety factor multiplier method in CHMC1-2014, Int. J. Hydrogen Energy. 40 (2015) 719–728. https://doi.org/10.1016/j.ijhydene.2014.10.114. [14] L.B. Peral, A. Zafra, S. Blasón, C. Rodríguez, J. Belzunce, Effect of hydrogen on the fatigue crack growth rate of quenched and tempered CrMo and CrMoV steels, Int. J. Fatigue. 120 (2019) 201–214. https://doi.org/10.1016/j.ijfatigue.2018.11.015. [15] S.A. Ahmad, D.A. Ryder, T.J. Davies, On the embrittlement of fracture toughness specimens of two high strength steels, Eng. Fract. Mech. 7 (1975) 357–365. [16] L.W. Tsay, C.C. Liu, Y.H. Chao, Y.H. Shieh, Fatigue crack propagation in 2.25 Cr-1.0Mo steel weldments in air and hydrogen, Mater. Sci. Eng. A. 299 (2001) 16–26. https://doi.org/10.1016/S0921-5093(00)01420-9. [17] A. Zafra, F.J. Belzunce, C. Rodríguez, I. Fernández-Pariente, Hydrogen embrittlement of the coarse grain heat affected zone of a quenched and tempered 42CrMo4 steel, Int. J. Hydrogen Energy. (2020). [18] C. Colombo, G. Fumagalli, F. Bolzoni, G. Gobbi, L. Vergani, Fatigue behavior of hydrogen pre-charged low alloy Cr-Mo steel, Int. J. Fatigue. 83 (2015) 2–9. https://doi.org/10.1016/j.ijfatigue.2015.06.002. [19] Z. Sun, C. Moriconi, G. Benoit, D. Halm, G. Henaff, Fatigue crack growth under high pressure of gaseous hydrogen in a 15-5PH martensitic stainless steel: Influence of pressure and loading frequency, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 44 (2013) 1320–1330. https://doi.org/10.1007/s11661-012-1133-5. [20] B. Vargas-Arista, J. Teran-Guillen, J. Solis, G. Garcia-Cerecero, M. Martinez-Madrid, Normalizing effect on fatigue crack propagation at the heat-affected zone of AISI 4140 steel shielded metal arc weldings, Mater. Res. 16 (2013) 772–778. https://doi.org/10.1590/S1516-14392013005000047. [21] Y. Murakami, S. Matsuoka, Effect of hydrogen on fatigue crack growth of metals, Eng. Fract. Mech. 77 (2010) 1926–1940. https://doi.org/10.1016/j.engfracmech.2010.04.012. [22] S. Matsuoka, H. Tanaka, N. Homma, Y. Murakami, Influence of hydrogen and frequency on fatigue crack growth behavior of Cr-Mo steel, Int. J. Fract. 168 (2011) 101–112. https://doi.org/10.1007/s10704-010-9560-z. [23] Stewart A.T., The effect of hydrogen on fatigue crack propagation in steels, in: Mech. Environ. Sensitive Crack. Mater., The Metals Society, 1977: pp. 400–410. [24] A. Zafra, J. Belzunce, C. Rodríguez, Hydrogen diffusion and trapping in 42CrMo4 quenched and tempered steel: influence of quenching temperature and plastic deformation, Mater. Chem. Phys. 255 (2020) 123599. [25] A. Zafra, Study on hydrogen diffusivity and embrittlement of quenched and tempered 42CrMo4 steel, PhD Thesis, University of Oviedo, Spain, 2021. [26] M.L. Martin, M. Dadfarnia, A. Nagao, S. Wang, P. Sofronis, Enumeration of the hydrogen-enhanced localized plasticity mechanism for hydrogen embrittlement in structural materials, Acta Mater. 165 (2019) 734–750. https://doi.org/10.1016/j.actamat.2018.12.014.