PSI - Issue 39

171 11

M.A. Sánchez Miranda et al. / Procedia Structural Integrity 39 (2022) 161–172 Author name / Structural Integrity Procedia 00 (2019) 000–000

Conflict of interest The authors declare that there is no conflict of interests in the publication of this paper.

References

[1] Thomas, W.M., Nicholas, E.D., Needham, J.C., Murch. M.G., Temple-Smith, P., and Dawes, C.J. 1991. Friction-stir butt welding, GB Patent No. 9125978.8, International patent application; No. PCT/GB92/02203. [2] Aliha, M.R.M., Shahheidari, M., Bisadi, M., et al ., 2016. Mechanical and metallurgical properties of dissimilar AA6061-T6 and AA7277-T6 joint made by FSW technique. Int J. Adv. Manuf. Technol. 86, 2551–2565. [3] Sen M., Shankar, S., Chattopadhyaya, S., 2020 Investigations into FSW joints of dissimilar aluminum alloys. Mat. Today Procc. 27(3), 2455 2462. [4] Chen, T., 2008. Process parameters study on FSW joint of dissimilar metals for aluminum-steel. J. of Mat. Sci. 44(10), 2573-2580. [5] Rahbarpour, R., Azdast, T., Rahbarpour, H., Shishavan, S.M., 2014. Feasibility study of friction stir welding of wood–plastic composites. Sci. and Tech. of Weld. and Join. 19(8), 673-681. [6] Lin, C.B., Wu, Ch., 2004. Friction welding of similar and dissimilar materials: PMMA and PVC. Poly. Eng. And Sci. 40(8), 1931-1941. [7] Gao, J., Li, Cha., Shilpakar, U., Shen, Y., 2015. Improvements of mechanical properties in dissimilar joints of HDPE and ABS via carbon nanotubes during friction stir welding process. Mater. and Desi. 86, 289-296. [8] Hajideh, M.R., Farahani, M., Alavi, S.A.D., Ramezani, N.M., 2017. Investigation on the effects of tool geometry on the microstructure and the mechanical properties of dissimilar friction stir welded polyethylene and polypropylene sheets. J. of Manuf. Proc. 26, 269-279. [9] Paik, J.K., 2009. Mechanical properties of friction stir welded aluminum alloys 5083 and 5383. Int. J. of Nav. Arch. and Ocean Eng. 1(1), 39 49. [10] Liu, H.J., Zhang, H.J., Yu, L., 2011. Effect of welding speed on microstructures and mechanical properties of underwater friction stir welded 2219 aluminum alloy. Mater. and Desi. 32, 1548-1553. [11] Benavides, S., Li, Y., Murr, L.E., Brown, D., and McClure, J.C., 1999. Low-temperature friction-stir welding of 2024 aluminum. Scrip. Mat. 41(8), 809-815. [12] Cavaliere, P., 2013. Friction stir welding of Al alloys: analysis of processing parameters affecting mechanical behavior. Proce CIRP. 11, 139 144. [13] Hangshenas, M., Khodabakhsi, F., 2019. Dissimilar friction-stir welding of aluminum and polymer: a review. Int J. of Adv. Mauf. Tech. 104, 333–358. [14] Simões, F., Rodrigues, D.M., 2014. Material flow and thermo-mechanical conditions during Friction Stir Welding of polymers: Literature review, experimental results and empirical analysis. Mater. and Desi. 59, 344-351. [15] Zafar, A., Awang, M., Khan, S.R., 2017. Friction Stir Welding of Polymers: An Overview. In: Awang M. (eds) 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. [16] Sahu, S.K., Mishra, D., Mahto, R.P., Sharma, V.M., Pal, S.K., Pal, K., Banerjee, S., Dash, P., 2018. Friction stir welding of polypropylene sheet. Eng. Sci. and Tech. an Int. J. 21(2): 245-254. [17] Eslami, S., Tavares, P.J., Moreira, P.M.G.P., 2017 Friction stir welding tooling for polymers: review and prospects. Int. J. Adv. Manuf. Technol. 89, 1677–1690. [18] Huang, Y., Meng, X., Xie, Y., Wan, L., Lu, Z., Cao, J., Feng, J., 2018. Friction stir welding/processing of polymers and polymer matrix composites. Comp. Part A: App. Sci. and Manuf. 105, 235-257. [19] Bagheri, A., Azdast, T., Doniavi, A., 2013. An experimental study on mechanical properties of friction stir welded ABS sheets. Mater. and Desi. 43, 402-409. [20] Verduzco Juárez, J.C., Dominguez Almaraz, G.M., García Hernández, R., Villalón López, J.J., 2016. Effect of modified pin profile and process parameters on the friction stir welding of aluminum alloy 6061-T6. Ad. in Mat. Sci. and Eng. Article ID 4567940. [21] Aydin, M., 2010. Effects of welding parameters and pre-heating on the friction stir welding of UHMW-Polyethylene. Poly. – Plas. Tech. and Eng. 49(6), 595-601. [22] Vijendra, B., Sharma, A., 2015. Induction heated tool assisted friction-stir welding (i-FSW): A novel hybrid process for joining of thermoplastics. J. of Manuf. Proc. 20, 234-244. [23] Patel, A.R., Dalwadi, Ch.G., Rana, H.G., 2016. A review: Dissimilar material joining of metal to polymer using Friction Stir Welding (FSW). Int. J. of Sci. Tech. & Engin. 2(10), 702-705. [24] Patel, A.R., Kotadiya, D.J., Kapopara, J.M., Dalwadi, Ch.G., Patel, N.P., Rana, H.G., 2018. Investigation of mechanical properties for hybrid joint of aluminium to polymer using Friction Stir Welding (FSW). Materials-Today Proc. 5(2), 4242-4249. [25] Mishra, D., Sahu, S.K., Mahto, R.P., Pal, S.K., 2016. Friction stir welding for joining of polymers. Strengthening and Joining by Plastic Deformation, Dixit, Uday Shanker, Narayanan, R. Ganesh (Eds.): 123-162. [26] Eslami, S., Ramos, T., Tavares, P.J., Moreira, P.M.G.P., 2015. Effect of friction stir welding parameters with newly developed tool for lap joint of dissimilar polymers. Proc. Eng. 114, 199-207. [27] Kumar, R., Singh, R., Ahuja, I.P.S., Penna, R., Feo, L., 2018. Weldability of thermoplastic materials for friction stir welding- A state of art