PSI- Issue 9

Tareq Rahman Mahmood et al. / Procedia Structural Integrity 9 (2018) 71–85 Tareq rahman mahmood , et al./ Structural Integrity Procedia 00 (2018) 000–000

85 15

Al-Mukhtar, A. M., Biermann, H., Henkel, S., Hübner, P. 2011. The Effect of Weld Profile and Geometries of Butt Weld Joints on Fatigue Life under Cyclic Tensile Loading. Journal of Materials Engineering and Performance 20(8), 1385–1391. Al-Mukhtar, A.M. 2013a. Investigation of the Thickness Effect on the Fatigue Strength Calculation. Journal of Failure Analysis and Prevention 13(1), 63–71. Al-Mukhtar, A.M. 2013b. Residual Stresses and Stress Intensity Factor Calculations in T-Welded Joints. Journal of Failure Analysis and Prevention 13(5), 619–23. Al-Mukhtar, A. M., Q.Doos M., Doos, Q. 2013. The Spot Weldability of Carbon Steel Sheet. Advances in Materials Science and Engineering,1– 6. Al-Mukhtar, AM. 2013. Consideration of the Residual Stress Distributions in Fatigue Crack Growth Calculations for Assessing Welded Steel Joints. Fatigue & Fracture of Engineering Materials & & Structures, 1352-1361. Al-Mukhtar, A.M., Doos, Q. M. 2013. Cracking Phenomenon in Spot Welded Joints of Austenitic Stainless Steel. Materials Sciences and Applications 4, 656–662. Al-Mukhtar, A.M. 2015. Spot Weldabaility Principles and Considerations. Südwestdeutscher Verlag Für Hochschulschriften Ag Co. Kg. Al-Mukhtar, A.M. 2016. Review of Resistance Spot Welding Sheets: Processes and Failure Mode. in Advanced Engineering Forum, Trans Tech Publ. 17, 31–57 ASTM Int. 2009. Standard Test Methods for Tension Testing of Metallic Materials 1. Astm (C):1–27. Ates, H. 2007. Prediction of Gas Metal Arc Welding Parameters Based on Artificial Neural Networks. Materials and Design 28(7), 2015–2023. Balasubramanian, M., Balasubramanian, V. 2010. Effect of Process Parameters on SPRC35 Spot Welded Automotive Panels. Acta Metallurgica Sinica (English Letters) 23(3), 185–190. Brauser, S., Pepke, L., Weber, A. G., Rethmeier, M. 2010. Deformation Behaviour of Spot-Welded High Strength Steels for Automotive Applications. Materials Science and Engineering: A 527(26), 7099–7108. Cui, Q. L. et al. 2017. Tensile and Fatigue Properties of Single and Multiple Dissimilar Welded Joints of DP980 and HSLA. Journal of Materials Engineering and Performance 26(2), 783–91. Dancette, S. et al. 2012. Investigation of the Tensile Shear Fracture of Advanced High Strength Steel Spot Welds. Engineering Failure Analysis 25, 112–122. Daws, K., , Abdul-Karim M., Al-Douri, A., Al-Mukhtar, A. M.. 2003. Investigation of Some Welding Parameters in Resistance Spot Welding of Austenitic Stainleass Steel. College of Engineering Journal, Baghdad University, Iraq. Duraffourg, S., Argoul, P., Vasseur, E., Cumunel, G. 2015. New Spot Weld Fatigue Criteria and Fatigue Data Editing Technique. Procedia Engineering 133, 433–53. Elsen, S. R., Ramesh, T., Aravinth, B. 2014. Optimization of Process Parameters of Zirconia Reinforced Alumina by Powder Forming Process Using Response Surface Method, Advanced Materials Research 984-985, 129-139. Fratini, L., Buffa, G., Palmeri, D. 2009. Using a Neural Network for Predicting the Average Grain Size in Friction Stir Welding Processes. Computers and Structures 87(17–18), 1166–1174. Ganesamoorthi, B., Kalaivanan, S., Dinesh, R., Naveen kumar, T., Anand, K. 2015. Optimization Technique Using Response Surface Method for USMW Process. Procedia - Social and Behavioral Sciences 189, 169–174. Hamidinejad, S. M., Kolahan, F., Kokabi, a. H. 2012. The Modeling and Process Analysis of Resistance Spot Welding on Galvanized Steel Sheets Used in Car Body Manufacturing. Materials & Design 34, 759–67. Luo, Y., Liu, J., Xu, H., Xiong, C., Liu, L. 2009. Regression Modeling and Process Analysis of Resistance Spot Welding on Galvanized Steel Sheet. Materials and Design 30(7), 2547–2555. Marashi, S. P. H., Alizadeh-Sh, M. 2015. Welding Metallurgy of Dissimilar AISI 430/DQSK Steels Resistance Spot Welds. Welding Journal 94(6). Marya, M., Wang, K., Hector, L. G., Gayden, X. 2006. Tensile-Shear Forces and Fracture Modes in Single and Multiple Weld Specimens in Dual Phase Steels. Journal of Manufacturing Science and Engineering 128(1), 287. Mathew, M. D., Whan Kim, D., Seog Ryu, W. 2008. A Neural Network Model to Predict Low Cycle Fatigue Life of Nitrogen-Alloyed 316L Stainless Steel. Materials Science and Engineering A 474(1–2), 247–253. Mirsalehi, S. E., Kokabi, a. H.. 2010. Fatigue Life Estimation of Spot Welds Using a Crack Propagation-Based Method with Consideration of Residual Stresses Effect. Materials Science and Engineering: A 527(23), 6359–6363. Pereira, a. M., Ferreira, J. M., Loureiro, a., Costa, J. D. M., Bártolo, P. J.. 2010. Effect of Process Parameters on the Strength of Resistance Spot Welds in 6082-T6 Aluminium Alloy. Materials & Design 31(5), 2454–2463. Pouranvari, M., Marashi, S. P. H. 2010. Key Factors Influencing Mechanical Performance of Dual Phase Steel Resistance Spot Welds. Science and Technology of Welding and Joining 15(2), 149–55. Pouranvari, M. 2012a. Failure Mode Transition in Similar and Dissimilar Resistance Spot Welds of HSLA and Low Carbon Steels. Canadian Metallurgical Quarterly 51(1), 67–74. Pouranvari, M. 2012b. Susceptibility to Interfacial Failure Mode in Similar and Dissimilar Resistance Spot Welds of DP600 Dual Phase Steel and Low Carbon Steel during Cross-Tension and Tensile-Shear Loading Conditions. Materials Science and Engineering: A 546, 129–38. Sadasue, T., Igi, S., Taniguchi, K., Ikeda, R., Oi, K. 2016. Fracture Behaviour and Numerical Study of Resistance Spot Welded Joints in High Strength Steel Sheet. Welding International 30(8), 602–613. Sugandhi, V., Ravishankar ,V. 2012. Optimization of Friction Surfacing Process Parameters for AA1100 Aluminum Alloy Coating with Mild Steel Substrate Using Response Surface Methodology (RSM) Technique. Modern Applied Science 6(2), 69–80. Wang, Z. W., Wang, Y. L., Dong, D. Z. 2013. Optimization on Parameters of Resistance Spot Welding Process for Galvanized Steel Plate. Advanced Materials Research 658, 178–181.