PSI - Issue 84

Biruk Yenehun Lemlem et al. / Procedia Structural Integrity 84 (2026) 1255–1263

1262

generalized to other discontinuity regions in reinforced concrete structures where strut-and-tie models are applicable. References Asso, R., Domaneschi, M., Marano, G. C., Palmisano, F., & Palombella, G. (2022). Behavior of Half-Joints: Design and Simulation of Laboratory Tests. Infrastructures , 7 (12). https://doi.org/10.3390/infrastructures7120160 De Domenico, D., Mazzeo, M., Messina, D., Santoro, R., & Recupero, A. (2025). Structural health assessment of concrete half-joint bridges: from load testing to FEM simulation accounting for material uncertainties. Structure and Infrastructure Engineering , 1–20. https://doi.org/10.1080/15732479.2025.2468199 Denis, M., Jacques, M., Paul, C., & D, C. W. (2011). Concorde Overpass Collapse: Structural Aspects. Journal of Performance of Constructed Facilities , 25 (6), 545–553. https://doi.org/10.1061/(ASCE)CF.1943 5509.0000183 Desnerck, P., Lees, J. M., & Morley, C. T. (2016). Impact of the reinforcement layout on the load capacity of reinforced concrete half-joints. Engineering Structures , 127 , 227–239. https://doi.org/10.1016/j.engstruct.2016.08.061 Desnerck, P., Lees, J. M., & Morley, C. T. (2018). Strut-and-tie models for deteriorated reinforced concrete half joints. Engineering Structures , 161 , 41–54. https://doi.org/10.1016/j.engstruct.2018.01.013 European Committee for Standardization. (2004). EN1992-1-1 Eurocode 2: design of concrete structures - Part 1-1: general rules and rules for buildings . Faleschini, F., Bonora, R., Zanini, M.A., Pellegrino, C. (2026). Ultimate capacity assessment of reinforced concrete half-joints. Engineering Structures, 350: 121971. Flores Ferreira, K., Rampini, M. C., Belletti, B., Calcavecchia, B., Camata, G., D’Angela, D., Di Salvatore, C., Di Stefano, N., Faccin, E., Ferretti, D., Granata, M. F., Iavarone, F., La Mendola, L., Magliulo, G., Martinelli, P., Menichini, G., Messina, D., Minelli, F., Orlando, M., … di Prisco, M. (2025). Reinforced concrete dapped-end beams for existing bridges: Reliability of finite element models. Structural Concrete , 26 (4), 4496–4531. https://doi.org/10.1002/suco.202400365 Giannetti, I., Mornati, S., Coccia, S., Di Carlo, F., & Rinaldi, Z. (2020). Safety assessment of existing post-war reinforced concrete bridges. The case study of ‘Gerber Girders’ bridges in Italy. 12th International Conference on Structural Analysis of Historical Constructions SAHC , 1–12. https://doi.org/10.23967/sahc.2021.217 Granata, M. F., La Mendola, L., Messina, D., & Recupero, A. (2023). Assessment and strengthening of reinforced concrete bridges with half-joint deterioration. Structural Concrete , 24 (1), 269–287. https://doi.org/10.1002/suco.202200367 Granata, M. F., Messina, D., Colajanni, P., La Mendola, L., & Lo Giudice, E. (2022). Performance of a historical cantilever reinforced concrete bridge with half-joint degradation. Structures , 37 , 561–575. https://doi.org/10.1016/j.istruc.2022.01.039 Highways England. (2020). CS 466 - Risk management and structural assessment of concrete half-joint deck structures . https://www.standardsforhighways.co.uk/search/fb88f0a1-6723-47f7-967f-5abc4cd38ec6 Luyten, K., Botte, W., & Caspeele, R. (2024). Probabilistic Quantification of the Structural Capacity in Concrete Discontinuity Regions Using Strut-and-Tie Models . 429–439. https://doi.org/10.1007/978-3-031-60271-9_40 Marco, di P., Matteo, C., & Paolo, M. (2023). Structural Aspects of the Collapse of a RC Half-Joint Bridge: Case of the Annone Overpass. Journal of Bridge Engineering , 28 (11), 5023007. https://doi.org/10.1061/JBENF2.BEENG-6063 Martinelli, P., Colombo, M., & di Prisco, M. (2024). Robustness assessment of half-joint RC girder bridges. Engineering Structures , 306 , 117712. https://doi.org/https://doi.org/10.1016/j.engstruct.2024.117712 Mata-Falcón, J., Pallarés, L., & Miguel, P. F. (2019). Proposal and experimental validation of simplified strut-and-tie models on dapped-end beams. Engineering Structures , 183 , 594–609. https://doi.org/https://doi.org/10.1016/j.engstruct.2019.01.010 Menichini, G., Gusella, F., Morano, S. G., & Orlando, M. (2025). RC dapped-end beams with various reinforcement layouts: An experimental investigation. Engineering Structures , 322 , 119043. https://doi.org/10.1016/j.engstruct.2024.119043 Menichini, G., Gusella, F., & Orlando, M. (2024). Methods for evaluating the ultimate capacity of existing RC half joints. Engineering Structures , 299 , 117087. https://doi.org/10.1016/j.engstruct.2023.117087 Nowak, A. S., & Collins, K. R. (2012). Reliability of structures . CRC press.