PSI - Issue 84

Federico Foria et al. / Procedia Structural Integrity 84 (2026) 304–312

312

Bieniawski, Z. T., 1989. Engineering rock mass classifications: A complete manual for engineers and geologists in mining, civil, and petroleum engineering. Wiley-Interscience. Foria, F., Avancini, G., Ferraro, R., Miceli, G. & Peticchia, E., 2019. ARCHITA: an innovative multi-dimensional mobile mapping system for tunnels and infrastructures. MATEC Web of Conferences 295, SUS - Lille 2019. Foria, F., Calicchio, M., Panico, F., 2025. Technical, legal and sustainability analysis of AI software to pre-assess inspection Big Data: MIRET Tunnel AI. ITA-AITES World Tunnel Congress, WTC2025, Tunnelling into a Sustainable Future – Methods and Technologies, Stockholm. Foria, F., Di Meglio, M., Calicchio, M., Brichese, M., Panico, F.E., Miceli, G.,2024. A Retrospective Analysis of Deep Learning for Tunnel Asset Management: Balancing Efficiency, Ethics, Sustainability, and Security in the MIRET Framework. IEEE MetroXRAINE (2024). Higher Council of Public Works (HCPW), 2022a. Guidelines for the classification and risk management, safety assessment, and monitoring of existing bridges. Technical Guidelines, Ministry of Infrastructure and Sustainable Mobility, Rome, Italy, July 2022. Higher Council of Public Works (HCPW), 2022b. Guidelines for the classification and risk management, safety assessment, and monitoring of existing tunnels. Technical Guidelines, Ministry of Infrastructure and Sustainable Mobility, Rome, Italy, July 2022. Irfan, T. Y., & Dearman, W. R., 1978. Engineering classification and index properties of weathered granite. Bulletin of the International Association of Engineering Geology, 17(1), 79–90. Leto A.D., Simoni L., Gibin F., Gabrieli F., Scala A., Brezzi L., 2025. Comparative analysis of international regulations on landslide risk assessment and management for bridges and viaducts. Proc. of the 9th International Symposium on Geotechnical Safety and Risk (ISGSR). Edited by Zhongqiang Liu, Jian Dai and Kate Robinson. Published by Research Publishing, Singapore, doi: 10.3850/GRF-25280825_isgsr-117-P078-cd, pp. 549-553. Katz, O., & Hammer, P., 2000. Evaluation of mechanical rock properties using a Schmidt hammer. Journal of Applied Geophysics, 44(2), 85–93. Markland, J. T., 1972. A useful technique for estimating the stability of rock slopes when the rigid wedge slide type of failure is expected (Imperial College Rock Mechanics Research Report No. 19). Imperial College of Science and Technology. Palmström, A., 1974. Characterization of jointing density and the quality of rock masses. Internal report, A.B. Berdal, Norway. Sachpazis, C. I., 1990. Mechanical properties of certain rocks. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 27(5), 75–83 U.S. Department of Transportation – Federal Highway Administration, 2005. Unstable Slope Management Program (USMP): Reference Manual. Federal Highway Administration, Washington, DC, USA. U.S. Department of Transportation – Federal Highway Administration, 2015. National Tunnel Inspection Standards (NTIS) (23 CFR Part 650). Washington, DC, USA. U.S. Department of Transportation – Federal Highway Administration, 2022. National Bridge Inspection Standards (NBIS), 23 CFR Part 650, Subpart C. Washington, DC, USA.