PSI - Issue 84

Alberto Barontini et al. / Procedia Structural Integrity 84 (2026) 352–359

359

shape distribution is expected to mitigate this shortcoming when a limited number of sensors and markedly different mode shapes are targeted. Acknowledgements This study was supported by FABRE – “Research consortium for the evaluation and monitoring of bridges, viaducts and other structures” (www.consorziofabre.it/en). Any opinion expressed in the paper does not necessarily reflect the view of the funder. References An, H., Youn, B. D., & Kim, H. S. (2022). Optimal placement of non-redundant sensors for structural health monitoring under model uncertainty and measurement noise. Measurement, 204, 112102. https://doi.org/10.1016/j.measurement.2022.112102 An, Y., Chatzi, E., Sim, S.-H., Laflamme, S., Blachowski, B., & Ou, J. (2019). Recent progress and future trends on damage identification methods for bridge structures. Structural Control and Health Monitoring, 26(10), e2416. https://doi.org/10.1002/stc.2416 Barontini, A., Masciotta, M. G., Amado-Mendes, P., Ramos, L. F., & Lourenço, P. B. (2021). Negative selection algorithm based methodology for online structural health monitoring. Engineering Structures, 229, 111662. https://doi.org/10.1016/j.engstruct.2020.111662 Barontini, A., Perera, R., Masciotta, M. G., Amado-Mendes, P., Ramos, L., & Lourenço, P. (2019). Deterministically generated negative selection algorithm for damage detection in civil engineering systems. Engineering Structures, 197, 109444–109444. https://doi.org/10.1016/j.engstruct.2019.109444 Castro-Triguero, R., Murugan, S., Gallego, R., & Friswell, M. I. (2013). Robustness of optimal sensor placement under parametric uncertainty. Mechanical Systems and Signal Processing, 41(1), 268–287. https://doi.org/10.1016/j.ymssp.2013.06.022 Chaves, E., Barontini, A., Mendes, N., Compán, V., Chaves, E., Barontini, A., Mendes, N., & Compán, V. (2025). Optimising Sensor Placement in Heritage Buildings: A Comparison of Model-Based and Data-Driven Approaches. Sensors, 25(13). https://doi.org/10.3390/s25134212 Chaves, E., Barontini, A., Mendes, N., Compán, V., Lourenço, P. B., Chaves, E., Barontini, A., Mendes, N., Compán, V., & Lourenço, P. B. (2023). Methodologies and Challenges for Optimal Sensor Placement in Historical Masonry Buildings. Sensors, 23(23). https://doi.org/10.3390/s23239304 García-Macías, E., Ruccolo, A., Zanini, M. A., Pellegrino, C., Gentile, C., Ubertini, F., & Mannella, P. (2023). P3P: A software suite for autonomous SHM of bridge networks. Journal of Civil Structural Health Monitoring, 13(8), 1577–1594. https://doi.org/10.1007/s13349-022-00653-6 Hormazábal, M. F., Barontini, A., Masciotta, M. G., & Oliveira, D. V. (2023). A non-parametric algorithm for time-dependent modal analysis of civil structures and infrastructures. Mechanical Systems and Signal Processing, 204, 110802. https://doi.org/10.1016/j.ymssp.2023.110802 Kammer, D. C. (1991). Sensor placement for on-orbit modal identification and correlation of large space structures. Journal of Guidance, Control, and Dynamics, 14(2), 251–259. https://doi.org/10.2514/3.20635 Kammer, D. C. (1992). Effect of model error on sensor placement for on-orbit modal identification of large space structures. Journal of Guidance, Control, and Dynamics, 15(2), 334–341. https://doi.org/10.2514/3.20841 Kim, T., Youn, B. D., & Oh, H. (2018). Development of a stochastic effective independence (SEFI) method for optimal sensor placement under uncertainty. Mechanical Systems and Signal Processing, 111, 615–627. https://doi.org/10.1016/j.ymssp.2018.04.010 Kiureghian, A. D., & Ditlevsen, O. (2009). Aleatory or epistemic? Does it matter? Structural Safety, 31(2), 105–112. https://doi.org/10.1016/j.strusafe.2008.06.020 Magalhães, F., Cunha, A., & Caetano, E. (2012). Vibration based structural health monitoring of an arch bridge: From automated OMA to damage detection. Mechanical Systems and Signal Processing, 28, 212–228. https://doi.org/10.1016/j.ymssp.2011.06.011 Masciotta, M. G., Barontini, A., Chaves, E., Mendes, N., Brando, G., & Lourenço, P. B. (2025). Modal-based multi-criteria optimization of sensor placement techniques for dynamic monitoring of bridges. International Journal of Bridge Engineering, Management and Research, 2(2), 214250017–214250021. https://doi.org/10.70465/ber.v2i2.26 Orcesi, A. D., & Frangopol, D. M. (2011). Optimization of bridge maintenance strategies based on structural health monitoring information. Structural Safety, 33(1), 26–41. https://doi.org/10.1016/j.strusafe.2010.05.002 Ostachowicz, W., Soman, R., & Malinowski, P. (2019). Optimization of sensor placement for structural health monitoring: A review. Structural Health Monitoring, 1475921719825601–1475921719825601. https://doi.org/10.1177/1475921719825601 Papadimitriou, C., & Lombaert, G. (2012). The effect of prediction error correlation on optimal sensor placement in structural dynamics. Mechanical Systems and Signal Processing, 28, 105–127. https://doi.org/10.1016/j.ymssp.2011.05.019 Vincenzi, L., & Simonini, L. (2017). Influence of model errors in optimal sensor placement. Journal of Sound and Vibration, 389, 119–133. https://doi.org/10.1016/j.jsv.2016.10.033 Vinot, P., Cogan, S., & Cipolla, V. (2005). A robust model-based test planning procedure. Journal of Sound and Vibration, 288(3), 571–585. https://doi.org/10.1016/j.jsv.2005.07.007 Yang, C., Liang, K., & Zhang, X. (2020). Strategy for sensor number determination and placement optimization with incomplete information based on interval possibility model and clustering avoidance distribution index. Computer Methods in Applied Mechanics and Engineering, 366, 113042. https://doi.org/10.1016/j.cma.2020.113042