PSI - Issue 8

V.G. Belardi et al. / Procedia Structural Integrity 8 (2018) 368–378

378

V.G. Belardi et al. / Structural Integrity Procedia 00 (2017) 000–000

11

In addition, making use of the solution to this loading condition, some of the Spot Joint Element sti ff ness matrix terms can be defined. Results of the original proposed method were compared to those obtained by means of FEA performed with a refined reference model, for quasi-isotropic laminate stacking sequences and di ff erent slenderness and radius ratios; the matching of results is good, so that the analytical procedure proposed and developed here is verified. It is also found that the neglected circumferential variability for this stacking sequence does not significantly influence the accuracy of the evaluation of the displacement field and of the plate sti ff ness. Andakhshideh, A., Maleki, S., Aghdam, M.M., 2010. Non-linear bending analysis of laminated sector plates using generalized di ff erential quadra ture. Composite Structures 92, 2258–2264. Belardi, V.G., Fanelli, P., Vivio, F., 2017. Structural analysis and optimization of anisogrid composite lattice cylindrical shells. Composites Part B: Engineering, under review . Belardi, V.G., Fanelli, P., Vivio, F., 2018. Bending analysis with Galerkin method of rectilinear orthotropic composite circular plates subject to transversal load with general stacking sequence. Composites Part B: Engineering, under review . Chowdhury, N.M., Wang, J., Chiu, W.K., Chang, P., 2016. Experimental and finite element studies of thin bonded and hybrid carbon fibre double lap joints used in aircraft structures. Composites Part B: Engineering 85, 233–242. Feo, L., Latour, M., Penna, R., Rizzano, G., 2017. Pilot study on the experimental behavior of GFRP-steel slip-critical connections. Composites Part B: Engineering 115, 209–222. Fu, L., Waas, A.M., 1992. Buckling of polar and rectilinearly orthotropic annuli under uniform internal or external pressure loading. Composite Structures 22, 47–57. Giannopoulos, I.K., Doroni-Dawes, D., Kourousis, K.I., Yasaee, M., 2017. E ff ects of bolt torque tightening on the strength and fatigue life of airframe FRP laminate bolted joints. Composites Part B: Engineering 125, 19–26. Gray, P.J., McCarthy, C.T., 2010. A global bolted joint model for finite element analysis of load distributions in multi-bolt composite joints. Composites Part B: Engineering 41, 317–325. Gray, P.J., Mccarthy, C.T., 2011. A highly e ffi cient user-defined finite element for load distribution analysis of large-scale bolted composite structures. Composites Science and Technology 71, 1517–1527. Jones, R.M., 1975. Mechanics of composite materials. Scripta Book Company Washington DC. Kadkhodayan, M., Erfani Moghadam, A., Turvey, G.J., Alamatian, J., 2012. A dxdr large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-di ff erences. Journal of Mechanical Science and Technology 26, 3231– 3242. Lekhnitskii, S.G., Tsai, S.W., Cheron, T., 1968. Anisotropic Plates, Translated from the second Russian edition by S.W. Tsai and T. Cheron, Gordon and Breach. Gordon and Breach, Science Publishers, Inc., New York. Maleki, S., Tahani, M., 2013. Bending analysis of laminated sector plates with polar and rectilinear orthotropy. European Journal of Mechanics - A / Solids 40, 84–96. McCarthy, M.A., McCarthy, C.T., Lawlor, V.P., Stanley, W.F., 2005. Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: part I - model development and validation. Composite Structures 71, 140–158. Rajappa, N.R., 1963. Free vibration of rectangular and circular orthotropic plates. AIAA Journal , 1194–1195. Reddy, J.N., 2006. Theory and analysis of elastic plates and shells. CRC press. Salehi, M., Sobhani, A.R., 2004. Elastic linear and non-linear analysis of fiber-reinforced symmetrically laminated sector Mindlin plate. Composite Structures 65, 65–79. Seifi, R., Khoda-yari, N., Hosseini, H., 2012. Study of critical buckling loads and modes of cross-ply laminated annular plates. Composites Part B: Engineering 43, 422–430. Tang, S., 1972. Stability of a laminated anisotropic circular plate. Journal of Spacecraft and Rockets 9, 123–124. Timoshenko, S., Woinowsky-Krieger, S., 1959. Theory of plates and shells. 2nd ed., McGraw-Hill, New York. Vivio, F., 2009. A new theoretical approach for structural modelling of riveted and spot welded multi-spot structures. International Journal of Solids and Structures 46, 4006–4024. Zhou, Y., Yazdani Nezhad, H., Hou, C., Wan, X., McCarthy, C.T., McCarthy, M.A., 2015. A three dimensional implicit finite element damage model and its application to single-lap multi-bolt composite joints with variable clearance. Composite Structures 131, 1060–1072. References