PSI - Issue 75

Francesco Collini et al. / Procedia Structural Integrity 75 (2025) 375–381 F. Collini et al. / Structural Integrity Procedia 00 (2025) 000–000

381

7

Atzori, B., Lazzarin, P., Meneghetti, G., 2005. A unified treatment of the mode i fatigue limit of components containing notches or defects. International Journal of Fracture 2005 133:1 133, 61–87. doi: 10.1007/S10704-005-2183-0 . Beretta, Murakami, 2000. Sif and threshold for small cracks at small notches under torsion. Fatigue & Fracture of Engineering Materials & Structures 23, 97–104. Collini, F., Meneghetti, G., 2024. Towards a fracture mechanics-based fatigue assessment of lattice structures obtained from additive manufacturing of metallic powders. Materials & Design 244, 113077. doi: https://doi.org/10.1016/j.matdes.2024.113077 . Collini, F., Rigon, D., Meneghetti, G., 2025. Notch and fracture mechanics-based assessment of multiaxial fatigue thresholds of defects and sharp notches in metallic materials. Fatigue & Fracture of Engineering Materials & Structures 48, 1929–1970. doi: https://doi.org/10.1111/ ffe.14478 . Crossland, B., 1956. E ff ect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel 138, 12–12. Dias, A., Bemfica, C., Castro, F., 2022. Multiaxial high cycle fatigue of 304l stainless steel with a small defect. International Journal of Fatigue 156, 106698. doi: https://doi.org/10.1016/j.ijfatigue.2021.106698 . Dixon, W.J., 1965. The up-and-down method for small samples. Journal of the American Statistical Association 60, 967–978. doi: 10.1080/ 01621459.1965.10480843 . Ellyin, F., 1989. Cyclic strain energy density as a criterion for multiaxial fatigue failure. Biaxial and multiaxial fatigue 3, 571–583. Endo, M., Ishimoto, I., 2006. The fatigue strength of steels containing small holes under out-of-phase combined loading. International Journal of Fatigue 28, 592–597. Endo, M., Ishimoto, I., 2007. E ff ects of phase di ff erence and mean stress on the fatigue strength of small-hole-containing specimens subjected to combined load. Journal of Solid Mechanics and Materials Engineering 1, 343–354. Fatemi, A., Molaei, R., Sharifimehr, S., Phan, N., Shamsaei, N., 2017. Multiaxial fatigue behavior of wrought and additive manufactured ti-6al-4v including surface finish e ff ect. International Journal of Fatigue 100, 347–366. doi: 10.1016/J.IJFATIGUE.2017.03.044 . Foti, P., Razavi, N., Fatemi, A., Berto, F., 2023. Multiaxial fatigue of additively manufactured metallic components: A review of the failure mechanisms and fatigue life prediction methodologies. Progress in Materials Science 137, 101126. doi: https://doi.org/10.1016/j. pmatsci.2023.101126 . Gadouini, H., Nadot, Y., Rebours, C., 2008. Influence of mean stress on the multiaxial fatigue behaviour of defective materials. International Journal of Fatigue 30, 1623–1633. doi: https://doi.org/10.1016/j.ijfatigue.2007.11.010 . Garud, Y., 1981. A new approach to the evaluation of fatigue under multiaxial loadings . Gross, B., Mendelson, A., 1972. Plane elastostatic analysis of v-notched plates. International Journal of Fracture Mechanics 8, 267–276. Lazzarin, P., Livieri, P., Berto, F., Zappalorto, M., 2008. Local strain energy density and fatigue strength of welded joints under uniaxial and multiaxial loading. Engineering fracture mechanics 75, 1875–1889. Lazzarin, P., Zambardi, R., 2001. A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp v-shaped notches. International Journal of Fracture 2001 112:3 112, 275–298. doi: 10.1023/A:1013595930617 . Machado, P.V.S., Arau´jo, L.C., Soares, M.V., Reis, L., Arau´jo, J.A., 2020. Multiaxial fatigue assessment of steels with non-metallic inclusions by means of adapted critical plane criteria. Theoretical and Applied Fracture Mechanics 108. doi: 10.1016/j.tafmec.2020.102585 . Meneghetti, G., Campagnolo, A., 2020. State-of-the-art review of peak stress method for fatigue strength assessment of welded joints. International Journal of Fatigue 139, 105705. doi: 10.1016/j.ijfatigue.2020.105705 . Meneghetti, G., Lazzarin, P., 2007. Significance of the elastic peak stress evaluated by fe analyses at the point of singularity of sharp v-notched components. Fatigue & Fracture of Engineering Materials & Structures 30, 95–106. doi: 10.1111/j.1460-2695.2006.01084.x . Molaei, R., Fatemi, A., Phan, N., 2022. Multiaxial fatigue of lb-pbf additive manufactured 17–4 ph stainless steel including the e ff ects of surface roughness and hip treatment and comparisons with the wrought alloy. International Journal of Fatigue 155, 105595. Murakami, Takahashi, 1998. Torsional fatigue of a medium carbon steel containing an initial small surface crack introduced by tension–compression fatigue: Crack branching, non-propagation and fatigue limit. Fatigue & Fracture of Engineering Materials & Structures 21, 1473–1484. Nadot, Y., Billaudeau, T., 2006. Multiaxial fatigue limit criterion for defective materials. Engineering Fracture Mechanics 73, 112–133. doi: https: //doi.org/10.1016/j.engfracmech.2005.06.005 . Okazaki, S., Matsunaga, H., Ueda, T., Komata, H., Endo, M., 2014. A practical expression for evaluating the small shear-mode fatigue crack threshold in bearing steel. Theoretical and Applied Fracture Mechanics 73, 161–169. doi: https://doi.org/10.1016/j.tafmec.2014. 07.016 . special Issue on Current models in multiaxial fatigue and fracture - in memory of Professor Ewald Macha. Sines, G., Ohgi, G., 1981. Fatigue criteria under combined stresses or strains . Socie, D., Marquis, G., 1999. Multiaxial fatigue. SAE International. Stephens, R.I., Fatemi, A., Stephens, R.R., Fuchs, H.O., 2000. Metal fatigue in engineering. John Wiley & Sons. Susmel, L., 2009. Multiaxial notch fatigue. Elsevier. Vantadori, S., Ronchei, C., Scorza, D., Zanichelli, A., Arau´jo, L.C., Arau´jo, J.A., 2022. Influence of non-metallic inclusions on the high cycle fatigue strength of steels. International Journal of Fatigue 154, 106553. doi: https://doi.org/10.1016/j.ijfatigue.2021.106553 . Visentin, A., Campagnolo, A., Meneghetti, G., 2023. Analytical expressions to estimate rapidly the notch stress intensity factors at v-notch tips using the peak stress method. Fatigue & Fracture of Engineering Materials & Structures 46, 1572–1595. Williams, M.L., 1952. Stress singularities resulting from various boundary conditions in angular corners of plates in extension . Yanase, K., Endo, M., 2014. Multiaxial high cycle fatigue threshold with small defects and cracks. Engineering Fracture Mechanics 123, 182–196.