PSI - Issue 75

Robert Goraj et al. / Procedia Structural Integrity 75 (2025) 691–708 Goraj/ Structural Integrity Procedia (2025)

707 17

Chiang Mai, Thailand, 2022, pp. 1-6, doi: 10.1109/ICEMS56177.2022.9982946. [18] Y. Terao, A. Seta, H. Ohsaki, H. Oyori , and N. Morioka, "Lightweight Design of Fully Superconducting Motors for Electrical Aircraft Propulsion Systems," IEEE Transactions on Applied Superconductivity , vol. 29, no. 5, pp. 1-5, 2019, Art no. 5202305, doi: 10.1109/TASC.2019.2902323. [19] X. Zhang, L. Li, and C. Zhang, "Mass Optimization Method of a Surface-Mounted Permanent Magnet Synchronous Motor Based on a Lightweight Structure," IEEE Access , vol. 8, pp. 40431-40444, 2020, doi: 10.1109/ACCESS.2020.2974908. [20] A. Credo, G. Fabri, M. Villani, and M. Popescu, "High speed synchronous reluctance motors for electric vehicles: a focus on rotor mechanical design," in 2019 IEEE International Electric Machines & Drives Conference (IEMDC) , San Diego, CA, USA, 2019, pp. 165-171, doi: 10.1109/IEMDC.2019.8785083. [21] A. Koronides, C. Krasopoulos, D. Tsiakos, M. S. Pechlivanidou , and A. Kladas, "Particular Coupled Electromagnetic, Thermal, Mechanical Design of High-Speed Permanent-Magnet Motor," IEEE Transactions on Magnetics , vol. 56, no. 3, pp. 1-5, 2020, Art no. 7510605, doi: 10.1109/TMAG.2019.2957614. [22] D. Golovanov et al., "Designing an Advanced Electrical Motor for Propulsion of Electric Aircraft," in 2019 AIAA/IEEE Electric Aircraft Technologies Symposium (EATS) , Indianapolis, IN, USA, 2019, pp. 1-12, doi: 10.2514/6.2019-4482. [23] N. Chiodetto, B. Mecrow, R. Wrobel , and L. Lisle, "Electro-Mechanical Challenges in the Design of a High Speed-High-Power-PMSM Rotor for an Aerospace Application," in 2019 IEEE Energy Conversion Congress and Exposition (ECCE) , Baltimore, MD, USA, 2019, pp. 3944-3951, doi: 10.1109/ECCE.2019.8912521. [24] V. Cabral do Nascimento and S. D. Sudhoff, "Non-Axisymmetric Structural Analysis of High Speed Rotor Orthotropic Retention Sleeve," in 2019 IEEE International Electric Machines & Drives Conference (IEMDC) , San Diego, CA, USA, 2019, pp. 797-804, doi: 10.1109/IEMDC.2019.8785324. [25] A. Oechsner, Classical Beam Theories of Structural Mechanics . Zurich: Springer Cham, 2022, ISBN 978-3 030-76037-3. [26] A. Díaz-de-Anda et al., "Experimental study of the Timoshenko beam theory predictions," Journal of Sound and Vibration , vol. 331, no. 26, pp. 5732-5744, 2012, doi.org/10.1016/j.jsv.2012.07.041. [27] G. Dolfo and J. Vigué, "Damping of coupled harmonic oscillators," European Journal of Physics , vol. 39, no. 2, pp. 025-030, 2018, DOI 10.1088/1361-6404/aa9ec6. [28] J. Dlugosz, Complex functions . Wroclaw: Oficyna Wydawnicza GiS, 2013, ISBN 978 – 83 – 62780 – 16-7. [29] J. Bechhoefer, Control Theory for Physicists . Cambridge: Cambridge University Press., 2021, ISBN: 9780511734809. [30] R. Rennert, E. Kullig, M. Vormwald, A. Esderts, and D. Siegele, Analytical strenght assessment of components in mechanical engineering. FKM-guideline, 7th edition 2020 .: VDMA Verlag, 2021, ISBN: 3816307450. [31] S. Koechlin, "FKM Guideline : strengths, limitations and experimental validation," Procedia Engineering , vol. 133, p. 309 – 319, 2015. [32] S. A. McKelvey, Y.-L. Lee, and M. E. Barkey, "Stress-Based Uniaxial Fatigue Analysis Using Methods Described in FKM-Guideline," Journal of Failure Analysis and Prevention , vol. 12, p. 445 – 484, 2012, DOI:10.1007/s11668-012-9599-4. [33] G. R. Cowper, "The Shear Coefficient in Timoshenko’s Beam Theory," Journal of applied mechanics , vol. 33, no. 2, pp. 335-340, 1966, doi: org/10.1115/1.3625046. [34] T. Kaneko, "On Timoshenko's correction for shear in vibrating beams," Journal of Physics D: Applied Physics , vol. 8, no. 16, 1926, doi: 10.1088/0022-3727/8/16/003. [35] Fabian Weber, Haoran Wu, and Peter Starke, "A new short-time procedure for fatigue life evaluation based on the linear damage accumulation by Palmgren – Miner," International Journal of Fatigue , vol. 172, no. 107653, ISSN 0142-1123, https://doi.org/10.1016/j.ijfatigue.2023.107653, 2023. [36] C. M. Sonsino, "Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety," International Journal of Fatigue , vol. 29, no. 12, pp. 2246-2258, 2007, doi:10.1016/j.ijfatigue.2006.11.015.