PSI - Issue 72

Taras Dalyak et al. / Procedia Structural Integrity 72 (2025) 13–19

19

Isida, M., 1977. Bending of plate containing arbitrary array of cracks. Transactions of the Japan Society of Mechanical Engineers 43, 367, 825 – 837 Jones, D. P., Swedlow J. L., 1975. The influence of crack closure and elasto-plastic flow on the bending of a cracked plate. International Journal of Fracture 11, 6, 897 – 914. https://doi.org/10.1007/BF00033836 Joseph, P. F., Erdogan, F., 1989. Surface crack problems in plate bending. Int. J. Fract. 41, 2, 105 – 131. https://doi.org/10.1007/BF00018480. Khludnev, A. M., 1995. On contact problem for a plate having a crack. Control and Cybernetics 24, 3, 349 – 361 Khludnev, A. M., Kovtunenko, V. A., 2000. Analysis of cracks in solids. WIT-Press, Southampton; Boston Lazarev, N. P., 2011. An equilibrium problem for a Timoshenko plate with a through crack. Sib. Zh. Ind. Mat. 14, 4, 32 – 43. Murakami, Y., 1987. Stress Intensity Factors Handbook. Vol. 2. Pergamon Press Muzychuk, K. P., 2013. Stress state of the piecewise homogeneous plate with two curvilinear cuts the edges of which are contacting when bending. Naukovi notatky 40, 191 – 197 Opanasovych, V. K., Seliverstov, R. H., 2001. Bending of a plate with two identical collinear rectilinear cracks according to the theory of Reissner. Materials Science, 37, 1, 59 – 64. https://doi.org/10.1023/A:1012382105237 Opanasovych, V. K., Slobodyan, M. S., 2018. Bending of an Isotropic plate with two identical coaxial through cracks depending on the width of the contact zone of their faces and in the presence of plastic zones near their tips. Journal of Mathematical Sciences, 229, 3, 280 – 291 https://doi.org/10.1007/s10958-018-3677-4 Opanasovych, V. K., Stashchuk, M. H., Dorosh, M. I., 2008. Bending of a plate containing a periodic system of collinear cracks with regard for the contact of crack lips. Materials Science 44, 2, 201 – 210. https://doi.org/10.1007/s11003-008-9063-5 Perepichka, V. V., Shats’kyi, I. P., 2002. Bending of a semiinfinite plate with a periodic system of cuts considering the contact of their edges. Journal of Mathematical Sciences 109, 1, 1290 – 1294. https://doi.org/10.1023/A:1013713215277 Savruk, M. P., 1981a. Bending of thin elastic plates weakened by curved cracks, Materials Science, 16, 369 – 375, https://doi.org/10.1007/ BF00722681. Savruk, M. P., 1981b. Two-dimensional problems of elasticity for cracked bodyes. Naukova dumka, Kiev Shats’kyi, I. P., Dalyak, T. M., 2002. Closure of cracks merged with slots in bent plates. Materials Science 38, 1, 24 – 33, https://doi.org/10. 1023/A:1020164529724 Shatskii, I. P., 1989. Contact of the edges of the slit in the plate in combined tension and bending. Materials Science 25, 2, 160 – 165. https://doi.org/10.1023/A:1013713215277 Shatskii, I. P., 1990. Interaction of collinear sections with contacting edges in a bent plate. Materials Science 26, 3, 311 – 316, https://doi.org/ 10.1007/BF00727363. Shatskii, I. P., 1991. Bending of a plate containing a periodic system of parallel slits with contacting edges. Soviet Applied Mechanics 27, 12, 1186 – 1190. 10.1007/BF01301504 Shatskii, I. P., 2001. Model for contact of crack boundaries in a bending plate. Journal of Mathematical Sciences 103, 3, 357 – 362, https://doi.org/ 10.1023/A:1011366312923. Shatsky, I. P., 1988. Bending of plate weakened by the cut with contacting edges. Dopovidi Akademii Nauk Ukrainskoi RSR Ser. A – Fiziko matematichni ta technichni nauki 7, 49 – 51 Shatskyi, I., Dalyak Т., 2018. Intera ction of contact cracks and narrow slits in plate bending, Procedia Structural Integrity 13, 1476 – 1481. https://doi.org/10.1016/j.prostr.2018.12.304. Slobodian, M. S., Shainoga, M. I., 2024. Stress-Strain State of Bent Plate with System of Cracks with Faces Contacting Within Constant-Height Zone. International Applied Mechanics 60, 2, 188 – 202. https://doi.org/10.1007/s10778-024-01273-x Sulym, H., Opanasovych, V., Zvizlo, I., Seliverstov, R., Bilash, O., 2021. A Circular Inclusion and Two Radial Coaxial Cracks with Contacting Faces in a Piecewise Homogeneous Isotropic Plate under Bending. Acta Mechanica et Automatica, 14, 1, 16 – 21, https://doi.org/10.2478 /ama-2020-0003 Williams, M. L., 1961. The bending stress distribution on the base of a stationary crack. Journal of Applied Mechanics 28, 1, 78 – 82, https://doi. org/10.1115/1.3640470 Young, M. J., Sun, C. T., 1992. Influence of crack closure on the stress intensity factor in bending plates – A classical plate solution. International Journal of Fracture 55, 81 – 93. https://doi.org/10.1007/BF00018034 Zehnder, A. T., Viz, M. J., 2005. Fracture mechanics of thin plates and shells under combined membrane, bending and twisting loads. Applied Mechanics Reviews 58, 37 – 48. https://doi.org/10.1115/1.1828049