PSI - Issue 7

A. Brueckner-Foit et al. / Procedia Structural Integrity 7 (2017) 36–43 A. Brückner-Foit/ Structural Integrity Procedia 00 (2017) 000–000

43

8

6. Acknowledgments The authors would like to thank the Hessen State Ministry of Higher Education, Research and the Arts - Initiative for the Development of Scientific and Economic Excellence (LOEWE) - for financial support of the special research project ‘‘Safer Materials”. 7. References Z. Li, N. Limodin, A. Tandjaoui, P. Quaegebeur, J.-F. Witz, D. Balloy. Influence of Fe content on the damage mechanism in A319 aluminum alloy: Tensile tests and digital image correlation. Engineering Fracture Mechanics. (DOI: https://doi.org/10.1016/j.engfracmech.2017.05.006). M. Luetje, M. Wicke, I. Bacaicoa, A. Brueckner-Foit, A. Geisert, M. Fehlbier. 3D characterization of fatigue damage mechanisms in a cast aluminum alloy using X-ray tomography. International Journal of Fatigue (2017), vol. 103, pp. 363-370. S. Dezecot, V. Maurel, J.-Y. Buffiere, F. Szmytka, A. Koster. 3D characterization and modeling of low cycle fatigue damage mechanisms at high temperature in a cast aluminum alloy. Acta Materialia (2017), vol. 123, pp. 24-34. A. M. Samuel, F.H. Samuel, H. W. Doty, S. Valtierra. Effect of Fe, Sr, P, Ti and undercooling on the precipitation of ß-Al5FeSi in A319.2 type alloys. International Journal of Metalcasting. (DOI: 10.1007/s40962-016-0116-5). J. M. Yu, N. Wanderka, A. Rack, R. Daudin, E. Boller, H. Markoeter, A. Manzoni, F. Vogel, T. Arlt, I. Manke, J. Banhart. Formation of intermetallic δ phase in Al-10Si-0.3Fe alloy investigated by in-situ 4D X-ray synchrotron tomography. Acta Materialia (2017), vol. 129, pp. 194-202. A. Bjurenstedt, D. Casari, S. Seifeddine, R. H. Mathiesen, A. K. Dahle. In-situ study of morphology and growth of primary a-Al(FeMnCr)Si intermetallics in an Al-Si alloy. Acta Materialia (2017), vol. 130, pp. 1-9. I. Bacaicoa, M. Wicke, M. Luetje, F. Zeismann, A. Brueckner-Foit, A. Geisert, M. Fehlbier. Characterization of casting defects in a Fe-rich Al-Si-Cu alloy by microtomography and finite element analysis. Engineering Fracture Mechanics. (DOI: https://doi.org/10.1016/j.engfracmech.2017.03.015) FEI Company. Avizo 3D Software. https://www.fei.com/software/amira-avizo (2016), 9.2. Dassault Systemes. Simulia, Abaqus. https://www.3ds.com/products-services/simulia/products/abaqus (2014), 6.14.