PSI - Issue 60

Rosy Sarkar et al. / Procedia Structural Integrity 60 (2024) 75–92 Rosy Sarkar/ Structural Integrity Procedia 00 (2019) 000 – 000

91 17

Acknowledgements

Authors express sincere thanks to Mr. Venkataiah for providing the pipebend drawing and all the Structural Mechanics Lab team members for the technical support.

References

ASME 2013 Section III, Division-1, NH, Non-mandatory Appendix NH-T Rules for Strain, Deformation and Fatigue Limits at Elevated Temperatures. Ashutosh Mishra, Suresh Kumar R., Sasikala G. and Chellapandi P., Influence of the Frequency of Level Fluctuations With Reference to Progressive Deformation of Thin Cylindrical Shell, Procedia Engineering 86 ( 2014 ) 95 – 102. Bree J, Elastic-plastic behavior of thin tubes subjected to internal pressure and intermittent high-heat fluxes with application to fast-nuclear-reactor fuel elements, Journal of strain analysis, vol 2 No 3 (1967), pg:226-238. Bree J, Incremental growth due to creep and plastic yielding of thin tubes subjected to internal pressure and cyclic thermal stresses, Journal of strain analysis, vol 3 No 2 (1968), pg:122-127. Chellapandi, Perumal & Rao, C.. (2022). Progressive Deformation Modes of G91 Steel Subject to StressΓÇôStrain Cycles: Viscopl astic Simulation Towards Developing High-Temperature Design Rules. Transactions of the Indian National Academy of Engineering. 7. 10.1007/s41403-021 00309-9. Dubey J.K., S. Athmalingam, T.R. Sundaramoorthy, A.Selvaraj, Mechanical Design of Expansion Tank, PFBR/34150/DN/1000/Rev-A (2004). Hübel H., Basic conditions for material and structural ratcheting. Nucl Eng Des 1996;162(1):55 – 65. Hongwel Yang, Ying Dai, Pengfei He, Ratcheting Simulation of a Steel Pipe with Assembly Parts under Internal Pressure and a Cyclic Bending Load, Appl. Sci. 2019, 9(23), 5025; https://doi.org/10.3390/app9235025. Manoj P., Kasinathan M., Sakthivel M., Jayanthi T., Panigrahi B. K., Design, Implementation & Functional Aspects of the Control & Instrumentation System for Real Time Computer Based Safety Grade Decay Heat Removal System of PFBR. International Conference on Emerging Trends in Information Technology and Engineering, (2020). Matheron PH, et al. (2014) Development of efficiency diagram rule for ratcheting of 9Cr steels. http://www.eera-jpnm.eu. Mukhopadhyay C.K., Jayakumar T., Haneef T.K., Suresh Kumar S., Rao B.P.C., Sumit Goyal, Suneel K. Gupta, Vivek Bhasin, Vishnuvardhan S., Raghava G., Gandhi P., Use of acoustic emission and ultrasonic techniques for monitoring crack initiation/growth during ratcheting studies on 304LN stainless steel straight pipe, International Journal of Pressure Vessels and Piping 116 (2014) 27-36. Padmakumar G., Vinod V., Pandey G.K., Krishnakumar S., Chandramouli S., Vijaykumar G., Rajendra Prasad R., Mourya R.K., Madankumar P., Shanmugasundaram M., Ramakrishnan V., Meikandamurthy C., Rajan K.K., SADHANA facility for simulation of natural convection in the SGDHR system of PFBR, Progress in Nuclear Energy, 66 (2013) 99-107. Paul S. K., Sivaprasad S., Dhar S., Tarafder S., Ratcheting and low cycle fatigue behavior of SA333 steel and their life prediction. Journal of Nuclear Materials 2010; 401:17-24. Paul S. K, A critical review of experimental aspects in ratcheting fatigue: microstructure to specimen to component. Journal of Materials Research and Technology (2019). https://doi.org/10.1016/j.jmrt.2019.06.014. RCC-MR, Section III - Tome 1 - Subsection Z: Technical Appendix A3, (2012). RCC MRx RB, Components of Nuclear Installations CLASS N1Rx Reactor Components, (2012). Reddy D.V. and Swamidas A.S.J., Essentials of Offshore Structures, Framed and Gravity Platforms, ISBN-13:978-1-4822-2018-6 (e-book - PDF, 2014). Sivaprasad S., Surajit Kumar Paul, Suneel Kumar Gupta, Vivek Bhasin, Narasaiah N., Tarafder S., Influence of uniaxial ratchetting on low cycle fatigue behviour of SA 333 Gr. 6 CeMn steel, International Journal of Pressure Vessels and Piping 87 (2010) 464 - 469. Sudhakar C., et al., Specification for supply & erection of sodium piping, PFBR/30000/SP/1034 R-0, (2007). Suresh Kumar R., Jalaldeen S., Selvaraj P. and Chellapandi P., Elevated Temperature Design of SGDHR Main and Fast Dump Piping Circuit, PFBR/34140/DN/1000/ Rev-A (2010). Suresh Kumar R., Lakshmana Rao C., and Chellapandi P., Modelling Material Behavior of Austenitic Stainless Steel under Monotonic and Cyclic Loadings, International Journal of Applied Mechanics and Materials, ISSN:1660-9336, Vol. 151 (2012) pp 721-725, Trans Tech Publications, Switzerland, https://doi.org/10.4028/www.scientific.net/AMM.151.721. Suresh Kumar R., Selvaraj P. and Chellapandi P., Assessment of the Seismic Margin Available in the Design of the SGDHR Piping System by Testing, PFBR/34140/DN/1009/ Rev-A (2014). Suresh Kumar R., Rao B.N., Velusamy K., Relevance of factor of safety based on number of cycles in the prediction of fatigue crack initiation as per A16 sigmad approach, International Journal of Pressure Vessels and Piping, Volume 175, August 2019, 103924, https://doi.org/10.1016/j.ijpvp.2019.103924 Suresh Kumar R., Rao B.N., Velusamy K., Sasikala G., Jalaldeen S., Fatigue Crack Growth Material Parameters Based on Prototype Pipe Bend Test and Comparison with Conventional Parameters, International Journal of Pressure Vessels and Piping, International Journal of Pressure Vessels and Piping, Volume 188 (2020) 104209, "https://doi.org/10.1016/j.ijpvp.2020.104209": Suresh Kumar R., Rao B.N., Velusamy K., Raghupathy S., Coolant leak rate through fatigue cracked pipe bend: An experimental and design standard based investigation, International Journal of Pressure Vessels and Piping, Volume 204, 2023, 104953, ISSN 0308-0161, https://doi.org/10.1016/j.ijpvp.2023.104953.