PSI - Issue 60

Behrooz Tafazzolimoghaddam et al. / Procedia Structural Integrity 60 (2024) 575–581 Author name / Structural Integrity Procedia 00 (2019) 000–000

581

7

Acknowledgements The authors would like to thank the EPSRC for funding under grant number EP/T016728/1 5. References [1] H. Ocken, "The galling wear resistance of new iron-base hardfacing alloys: a comparison with established cobalt- and nickel-base alloys," Surf. Coat. Technol., pp. 456-461, 1995. [2] K. Gurumoorthy, M. Kamaraj, K. Prasad Rao, A. Sambasiva Rao and S. Venugopal, "Mirostructural aspects of plasma transferred arc surfaced Ni-Based hardfacing alloy," Materials Science & Engineering A, vol. 456, pp. 11-19, 2007. [3] S. Balaguru and M. Gupta, "Hardfacing studies of Ni alloys: a critical review," Journal of Material Research and Technology, vol. 10, pp. 1210-1242, 2021. [4] A. Nady, H. Bonnefoy, V. KloseK, M. H. Mathon and A. Lodini, "Numerical Modeling of Residual Stress and Prediction OF HEAT Affected Zone Induced by PTA Process," Materials Science Forum , vol. 652, pp. 44 49, 2010. [5] S. Balaguru, K. Shashi, M. Vela and P. Chellapandi, "Thermo Mechanical Analysis of SS304 Circular Grid Plate Hard Faced with Colmonoy," Applied Mechanics and Materials, Vols. 229-231, pp. 710-717, 2012. [6] P. Kumar and A. Pai, "An Overview of Welding Aspects and Challenges during Manufacture of Intermediate Heat Exchangers for 500mwe Prototype Fast Breeder Reactor," Procedia Engineering, vol. 86, pp. 173-183, 2014. [7] C. R. Das, S. K. Albert, A. K. Bhaduri and G. Kempulraj, "A novel procedure for fabrication of wear-resistant bushes for high-temperature application," Journal of Material Processing Technology, vol. 141, no. 1, pp. 60 66, 2003. [8] T. Roy, A. Paradowska, R. Abrahams, Q. Lai, M. Law, P. Mutton, M. Soodi and W. Yan, "Effect of Cladding Direction on Residual Stress Distribution in Laser Cladded Rails," International Journal of Civil and Environmental Engineering, vol. 11, no. 9, 2017. [9] N. Hutasoit, V. Luzin, A. Blicblau, W. Yan, M. Brandt and R. Cottam, "Fatigue life of laser clad hardfacing alloys on AISI 4130 steel under rotary bending fatigue test," International Journal of Fatigue, vol. 72, pp. 42 52, 2015. [10] M. B. Prime, "Cross-sectional mapping of residual stresses by measuring the surface contour after a cut," J. Eng. Mater. Technol., vol. 123, p. 162–168, 2001. [11] A. T. DeWald and M. B. Prime, "The Contour Method in Practical Residual Stress Measurement Method," G. S. Schajer, pp. 109-135, 2013. [12] H. F. Bueckner, "Field singularities and related integral representations," In: Sih G.C. (eds) Methods of analysis and solutions of crack problems. Mechanics of fracture, vol. 1, p. 239e314, 1973. [13] F. Hosseinzadeh, Y. Traore, P. J. Bouchard and O. Muransky, "Mitigating cutting-induced plasticity in the contour method, Part 1: Experimental," Int. J. Solid Struct. , pp. 247-253, 2016. [14] D. Hibbitt, B. Karlsson and P. Soresen, "Abaqus 6.12 Documentation and User Manual," 2012. [15] A. K. Bhaduri, R. Indira, S. K. Albert, B. S. Rao, S. C. Jain and S. Asokkumar, "Selection of hardfacing material for components of the Indian Prototype Fast Breeder Reactor," Journal of Nuclear Material, vol. 334, pp. 109-114, 2004. [16] Rouillard, F. Rouillard, B. Duprey, J. Courouau, R. Robin, P. Aubry, C. Blanc, M. Rabarant, H. Maskrot, L. Nicolas, M. Blat-Yrieix, G. Rolland and T. Marlaud, "Evaluation of cobalt free coating as hardfacing material condidates in sodium-cooled fast readtor and effect of oxygen in sodium on the tribological behaviour," Nuclear Science & Technology, vol. 5, no. 10, 2019.