PSI - Issue 60

B.P. Kashyap et al. / Procedia Structural Integrity 60 (2024) 494–509 B.P. Kashyap et al. / Structural Integrity Procedia 00 (2023) 000 – 000 15

508

Deformation of a PbSn Eutectic Alloy. Materials Science and Engineering 57, 205-213. https://doi.org/10.1016/0025-5416(83)90214-8 Kashyap, B. P., Mukherjee, A. K., 1983. Investigation on Grain Growth and Strain Rate Sensitivity of a Superplastic Microduplex Steel at 1000°C. Journal of Materials Science 18, 3299-3304. Kashyap, B. P., Mukherjee, A. K., 1985. Influence of Prior Straining on Superplastic Behaviour of an Fe-Cr-Ni Alloy. Materials Science and Technology 1, 291-296. https://doi.org/10.1179/mst.1985.1.4.291 Kashyap, B. P., McTaggart, K., Tangri, K., 1988. Study on the Substructure Evolution and Flow Behaviour in Type 316L Stainless Steel Over the Temperature Range 21-900°C. Philosophical Magazine A 57, 97-114. https://doi.org/10.1080/01418618808204501 Kashyap, B. P., Tangri, K., 1986. Evidence for Cavitation During Superplastic Deformation of an Al-Cu Eutectic Alloy. Scripta Metallurgica 20, 769-771. Kashyap, B. P., Tangri, K., 1987. On the Contribution of Concurrent Grain Growth to Strain Sensitive Flow of a Superplastic Al-Cu Eutectic Alloy. Metallurgical Transactions. A, Physical Metallurgy and Materials Science 18 A, 417-424. https://doi.org/10.1007/bf02648802 Kashyap, B. P., Tangri, K., 1989. Cavitation Behavior of an Al-Cu Eutectic Alloy During Superplastic Deformation. Metallurgical Transactions A 20, 453-462. https://doi.org/10.1007/BF02653925 Kashyap, B. P., Telang, S., 1991. Microstructural Evolution in a Superplastic Pb-Sn Eutectic Alloy. Journal of Materials Science Letters 10, 1307-1308. https://doi.org/10.1007/BF00722643 Kashyap, B. P., Tangri, K., 1995. On The Hall-Petch Relationship and Substructural Evolution in Type 316L Stainless Steel. Acta Metall. Mater. 43, 3971-3981. Kashyap, B. P., Tangri, K., 1997. Hall-Petch Relationship and Substructural Evolution in Boron Containing Type 316L Stainless Steel. Acta Materialia 45, 2383-2395. https://doi.org/10.1016/S1359-6454(96)00341 2 Kim, H. S., Estrin, Y., Bush, M. B., 2000. Plastic Deformation Behaviour of Fine-Grained Materials. Acta Materialia 48, 493-504. Langdon, T. G., 1970. Grain Boundary Sliding as a Deformation Mechanism During Creep. Philosophical Magazine 22, 689-700. https://doi.org/10.1080/14786437008220939 Leo, C. V. Di, Rimoli, J. J., 2019. New Perspectives on the Grain-Size Dependent Yield Strength of Polycrystalline Metals. Scripta Materialia 166, 149-153. https://doi.org/10.1016/j.scriptamat.2019.03.019 Lombard, C. M., Ghosh, A. K., Semiatin, S. L., 2001. An Analysis of Cavitation Occurring in Near- γ Titanium Aluminide during Superplastic Deformation. Metallurgical and Materials Transactions 32A, 2001-2769. Lundy, T. S., Hurdoch, J. F., 1962. Diffusion of Al 26 and Mn 54 in Aluminum. Journal of Applied Physics 33, 1671-1673. Mishra, M. K., Balasundar, I., Rao, A. G., Kashyap, B. P., Prabhu, N., 2017. On the High Temperature Deformation Behaviour of 2507 Super Duplex Stainless Steel. Journal of Materials Engineering and Performance 26, 802-812. https://doi.org/10.1007/s11665-017-2508-y Mohamadizadeh, A., Zarei-Hanzaki, A., Abedi, H. R., Mehtonen, S., Porter, D., 2015. Hot Deformation Characterization of Duplex Low-Density Steel Through 3D Processing Map Development. Materials Characterization 107, 293-301. https://doi.org/10.1016/j.matchar.2015.07.028 Mukherjee, A. K., 1971. The Rate Controlling Mechanism in Superplasticity. Materials Science and Engineering 8, 83-89. https://doi.org/10.1016/0025-5416(71)90085-1 Nabarro, F. R. N., 1948. Report of a Conference on the Strength of Solids (Bristol, U.K.), Physical Society, London, 75-90. Petch N. J., 1953. The Cleavage Strength of Polycrystals, I. Iron Steel Institute 174, 25-28.