PSI - Issue 60

Anupoju Rajeev et al. / Procedia Structural Integrity 60 (2024) 222–232 Author name / Structural Integrity Procedia 00 (2019) 000–000

232

11

structures subjected to blast loading, with potential modifications to the analytical model to incorporate the full range of non-linear behavior. Acknowledgements The financial support of the Defence Research and Development Organization, Government of India under Grant No. ARMREB/CDSW/ 2017/192 is greatly acknowledged. The authors are also grateful to Dr. Anugrah Singh (IIT Guwahati) for providing high-speed camera system. References G. Hughes, A.W. Beeby, 1982. Investigation of the effect of impact loading on concrete beams. The Structural Engineer B 60, 45–52. A. Rajeev, 2020. Experimental and analytical investigations of reinforced concrete beam column joint subjected to shock and impact loading. https://shodhganga.inflibnet.ac.in/handle/10603/443970 (accessed January 15, 2024). A. Rajeev, D. Mohotti, A. Shelke, 2020. Implications of impact experiments on honeycomb shielded exterior beam-column joint. Engineering Structures 212, 110470. A. Rajeev, S.S. Parsi, S.N. Raman, T. Ngo, A. Shelke, 2020. Experimental and numerical investigation of an exterior reinforced concrete beam column joint subjected to shock loading. International Journal of Impact Engineering 137, 103473. M. Carlsson, R. Kristensson, 2012. Structural Response with Regard to Explosions: Mode Superposition, Damping and Curtailment, Structural Mechanics, Lund University. https://core.ac.uk/download/pdf/289953483.pdf (accessed January 15, 2024). H. Aoude, F.P. Dagenais, R.P. Burrell, M. Saatcioglu, 2015. Behavior of ultra-high performance fiber reinforced concrete columns under blast loading. International Journal of Impact Engineering 80, 185–202. F. Stochino, G. Carta, 2014. SDOF models for reinforced concrete beams under impulsive loads accounting for strain rate effects. Nuclear Engineering and Design 276, 74–86. T. Ngo, P. Mendis, A. Gupta, J. Ramsay, 2007. Blast loading and blast effects on structures–an overview. Electronic Journal of Structural Engineering, 76–91. S. Andersson, H. Karlsson, 2012. Structural response of reinforced concrete beams subjected to explosions, Gothenburg: Chalmers University of Technology. J. Lubliner, J. Oliver, S. Oller, Ejij. Onate, 1989. A plastic-damage model for concrete. International Journal of Solids and Structures 25, 299–326. J. Lee, G.L. Fenves, 1998. Plastic-Damage Model for Cyclic Loading of Concrete Structures. J. Eng. Mech. 124, 892–900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892). A.M. Ali, B.J. Farid, A.I.M. Al-Janabi, 1990. Stress-Strain Relationship for concrete in compression made of local materials. Engineering Sciences 2. http://www.kau.edu.sa/Show_Res.aspx?Site_ID=320&LNG=EN&RN=52461 (accessed January 15, 2024). K. Fujikake, T. Senga, N. Ueda, T. Ohno, M. Katagiri, 2006. Effects of strain rate on tensile behavior of reactive powder concrete. Journal of Advanced Concrete Technology 4, 79–84. L.S. Hsu, C.-T.T. Hsu, 1994. Complete stress — strain behaviour of high-strength concrete under compression. Magazine of Concrete Research 46, 301–312. https://doi.org/10.1680/macr.1994.46.169.301. J.B. Mander, M.J.N. Priestley, R. Park, 1988. Theoretical Stress‐Strain Model for Confined Concrete. J. Struct. Eng. 114, 1804–1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804). K. Fujikake, K. Mori, K. Uebayashi, T. Ohno, J. Mizuncr, 2000. Dynamic properties of concrete materials with high rates of tri-axial compressive loads, WIT Transactions on The Built Environment 48. https://www.witpress.com/elibrary/wit-transactions-on-the-built environment/48/4775 (accessed January 15, 2024). J.B. Mander, M.J.N. Priestley, R. Park, 1988. Observed Stress‐Strain Behavior of Confined Concrete. J. Struct. Eng. 114, 1827–1849. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1827). G. Carta, F. Stochino, 2013. Theoretical models to predict the flexural failure of reinforced concrete beams under blast loads, Engineering Structures 49, 306–315. J.-F. Jiang, Y.-F. Wu, 2012. Identification of material parameters for Drucker–Prager plasticity model for FRP confined circular concrete columns. International Journal of Solids and Structures 49, 445–456. https://doi.org/10.1016/j.ijsolstr.2011.10.002. L. Ågårdh, L. Laine, 1999. 3D FE-simulation of high-velocity fragment perforation of reinforced concrete slabs. International Journal of Impact Engineering 22, 911–922. N. Banthia, 1990, A study of some factors affecting the fiber–matrix bond in steel fiber reinforced concrete. Can. J. Civ. Eng. 17, 610–620. https://doi.org/10.1139/l90-069. U.S. DoD, UFC 3-340-02: 2008. Structures to resist the effects of accidental explosions, US DoD.: Washington, DC, USA 83. V. Birtel, P. Mark, 2006. Parameterized Finite Element Modelling of RC Beam Shear Failure. Hibbitt, Karlsson, Sorensen, 1998. ABAQUS/Explicit: user’s manual, Hibbitt, Karlsson and Sorenson Incorporated. C.X. Dong, A.K.H. Kwan, J.C.M. Ho, 2015. A constitutive model for predicting the lateral strain of confined concrete. Engineering Structures 91, 155–166. https://doi.org/10.1016/j.engstruct.2015.02.014. K. Fujikake, B. Li, S. Soeun, 2009. Impact Response of Reinforced Concrete Beam and Its Analytical Evaluation. J. Struct. Eng. 135, 938–950. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000039.