PSI - Issue 57

David Mellé et al. / Procedia Structural Integrity 57 (2024) 61–72 David Melle´ / Structural Integrity Procedia 00 (2023) 000–000

72

12

Lanning, D.B., Nicholas, T., Haritos, G.K., 2005. On the use of critical distance theories for the prediction of the high cycle fatigue limit stress in notched Ti–6Al–4V5. International Journal of Fatigue . Le, V.D., Pessard, E., Morel, F., Edy, F., 2018. Influence of porosity on the fatigue behaviour of additively fabricated TA6V alloys. MATEC Web of Conferences 165, 02008. URL: https://www.matec-conferences.org/10.1051/matecconf/201816502008 , doi: 10.1051/ matecconf/201816502008 . Leuders, S., Tho¨ne, M., Riemer, A., Niendorf, T., Tro¨ster, T., Richard, H., Maier, H., 2013. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance. International Journal of Fatigue 48, 300–307. URL: https://www.sciencedirect.com/science/article/pii/S014211231200343X , doi: 10.1016/j.ijfatigue.2012.11.011 . Levy, G.N., Schindel, R., Kruth, J., 2003. RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES. CIRP Annals 52, 589–609. URL: https://doi.org/10. 1016%2Fs0007-8506%2807%2960206-6 , doi: 10.1016/s0007-8506(07)60206-6 . Lhuissier, P., de Formanoir, C., Martin, G., Dendievel, R., Godet, S., 2016. Geometrical control of lattice structures produced by EBM through chemical etching: Investigations at the scale of individual struts. Materials & Design 110, 485–493. URL: https://www.sciencedirect. com/science/article/pii/S0264127516310929 , doi: 10.1016/j.matdes.2016.08.029 . Maleki, E., Bagherifard, S., Bandini, M., Guagliano, M., 2021. Surface post-treatments for metal additive manufacturing: Progress, chal lenges, and opportunities. Additive Manufacturing 37, 101619. URL: https://www.sciencedirect.com/science/article/pii/ S221486042030991X , doi: 10.1016/j.addma.2020.101619 . Murakami, Y., 2002. Chapter 2 - Stress Concentration, in: Murakami, Y. (Ed.), Metal Fatigue. Elsevier Science Ltd, Oxford, pp. 11–24. URL: https://www.sciencedirect.com/science/article/pii/B9780080440644500025 , doi: 10.1016/B978-008044064-4/50002-5 . Murakami, Y., Endo, M., 1986. E ff ects of hardness and crack geometries on delta k sub th of small cracks emanating from small defects. Mechanical Engineering Publications, The Behaviour of Short Fatigue Cracks, , 275–293. Murakami, Y., Endo, M., 1994. E ff ects of defects, inclusions and inhomogeneities on fatigue strength. International Journal of Fatigue 16, 163–182. URL: https://www.sciencedirect.com/science/article/pii/0142112394900019 , doi: 10.1016/0142-1123(94)90001-9 . Parry, L., Ashcroft, I., Wildman, R., 2016. Understanding the e ff ect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation. Additive Manufacturing 12, 1–15. URL: https://www.sciencedirect.com/science/article/pii/ S2214860416300987 , doi: 10.1016/j.addma.2016.05.014 . Pegues, J., Roach, M., Scott Williamson, R., Shamsaei, N., 2018. Surface roughness e ff ects on the fatigue strength of additively manufac tured Ti-6Al-4V. International Journal of Fatigue 116, 543–552. URL: https://www.sciencedirect.com/science/article/pii/ S0142112318302986 , doi: 10.1016/j.ijfatigue.2018.07.013 . Persenot, T., Bu ffi ere, J.Y., Maire, E., Dendievel, R., Martin, G., 2017. Fatigue properties of EBM as-built and chemically etched thin parts. 3rd International Symposium on Fatigue Design and Material Defects, FDMD 2017 7, 158–165. URL: https://www.sciencedirect.com/ science/article/pii/S2452321617304298 , doi: 10.1016/j.prostr.2017.11.073 . Persenot, T., Burr, A., Dendievel, R., Bu ffi e`re, J.Y., Maire, E., Lachambre, J., Martin, G., 2020. Fatigue performances of chemically etched thin struts built by selective electron beam melting: Experiments and predictions. Materialia 9, 100589. URL: https://www.sciencedirect. com/science/article/pii/S2589152920300065 , doi: 10.1016/j.mtla.2020.100589 . Tammas-Williams, S., Withers, P.J., Todd, I., Prangnell, P.B., 2016. The E ff ectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting. Metallurgical and Materials Transactions A 47, 1939–1946. URL: http://link. springer.com/10.1007/s11661-016-3429-3 , doi: 10.1007/s11661-016-3429-3 . Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J.V., Kruth, J.P., 2010. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V. Acta Materialia 58, 3303–3312. URL: https://www.sciencedirect.com/science/article/pii/S135964541000090X , doi: 10.1016/j.actamat.2010.02.004 . Vayssette, B., Saintier, N., Brugger, C., Elmay, M., Pessard, E., 2018. Surface roughness of Ti-6Al-4V parts obtained by SLM and EBM: E ff ect on the High Cycle Fatigue life. 7th International Conference on Fatigue Design, Fatigue Design 2017, 29-30 November 2017, Senlis, France 213, 89–97. URL: https://www.sciencedirect.com/science/article/pii/S1877705818302327 , doi: 10.1016/j.proeng.2018. 02.010 . Wycisk, E., Solbach, A., Siddique, S., Herzog, D., Walther, F., Emmelmann, C., 2014. E ff ects of Defects in Laser Additive Manufactured Ti 6Al-4V on Fatigue Properties. 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014 56, 371–378. URL: https://www.sciencedirect.com/science/article/pii/S187538921400265X , doi: 10.1016/j.phpro.2014.08.120 . Xu, W., Lui, E., Pateras, A., Qian, M., Brandt, M., 2017. In situ tailoring microstructure in additively manufactured Ti-6Al-4V for su perior mechanical performance. Acta Materialia 125, 390–400. URL: https://www.sciencedirect.com/science/article/pii/ S1359645416309636 , doi: 10.1016/j.actamat.2016.12.027 .