PSI - Issue 56

Dan Micota et al. / Procedia Structural Integrity 56 (2024) 144–152 Dan Micota / Structural Integrity Procedia 00 (2019) 000 – 000

152

9

Huszar, M., Belblidia, F., Davies, H. M., Arnold, C., Bould, D., & Sienz, J. (2015). Sustainable injection moulding: The impact of materials selection and gate location on part warpage and injection pressure. Sustainable Materials and Technologies , 5 , 1 – 8. https://doi.org/10.1016/j.susmat.2015.07.001 Isaincu, A., Dan, M., Ungureanu, V., & Marșavina, L. (2021). Numerical investigation on the influence of fiber orientation mapping procedure to the mechanical response of short-fiber reinforced composites using Moldflow, Digimat and Ansys software. Materials Today: Proceedings , 45 , 4304 – 4309. https://doi.org/10.1016/j.matpr.2020.12.792 Isaincu, A., Micota, D., & Marsavina, L. (2022). On the Fracture Toughness of PPS and PPA Reinforced with Glass Fiber. Procedia Structural Integrity , 41 (C), 646 – 655. https://doi.org/10.1016/j.prostr.2022.05.073 Jørgensen, J. K., Andreassen, E., & Salaberger, D. (2019). The effect of fiber concentration on fiber orientation in injection molded film gated rectangular plates. Polymer Composites , 40 (2), 615 – 629. https://doi.org/10.1002/pc.24698 Li, K., Yan, S. L., Pan, W. F., & Zhao, G. (2017). Optimization of fiber-orientation distribution in fiber-reinforced composite injection molding by Taguchi, back propagation neural network, and genetic algorithm-particle swarm optimization. Advances in Mechanical Engineering , 9 (9), 1 – 11. https://doi.org/10.1177/1687814017719221 Lohr, C., Beck, B., Henning, F., Weidenmann, K. A., & Elsner, P. (2018). Process comparison on the microstructure and mechanical properties of fiber-reinforced polyphenylene sulfide using MuCell technology. Journal of Reinforced Plastics and Composites , 37 (15), 1020 – 1034. https://doi.org/10.1177/0731684418777120 Micota, D., Isaincu, A., & Marsavina, L. (2021). Micromechanical modeling of glass fiber reinforced plastic material. Materials Today: Proceedings . https://doi.org/10.1016/j.matpr.2020.12.919 Micota, D., Isaincu, A., & Marşavina, L. (2021). Experimental testing of two short -fiber reinforced composites: PPA-GF33 and PPS-GF40. Material Design and Processing Communications . https://doi.org/10.1002/mdp2.264 Ogierman, W., & Kokot, G. (2016). A study on fiber orientation influence on the mechanical response of a short fiber composite structure. Acta Mechanica , 227 (1), 173 – 183. https://doi.org/10.1007/s00707-015-1417-0 Oseli, A., Prodan, T., Susič, E., & Slemenik Perše, L. (2020). The effect of short fiber orientation on long term shear behavior of 40% glass fiber reinforced polyphenylene sulfide. Polymer Testing , 81 (August 2019). https://doi.org/10.1016/j.polymertesting.2019.106262 Şerban, D. A., Maravina, L., & Silb erschmidt, V. (2012). Behaviour of semi-crystalline thermoplastic polymers: Experimental studies and simulations. Computational Materials Science , 52 (1), 139 – 146. https://doi.org/10.1016/j.commatsci.2011.02.042 Şerban, D. A., Weissenborn, O., Geller, S., Marşavina, L., & Gude, M. (2016). Evaluation of the mechanical and morphological properties of long fibre reinforced polyurethane rigid foams. Polymer Testing , 49 , 121 – 127. https://doi.org/10.1016/j.polymertesting.2015.11.007 Skourlis, T. P., Pochiraju, K., Chassapis, C., & Manoochehri, S. (1998). Structure-modulus relationships for injection-molded long fiber reinforced polyphthalamides. Composites Part B: Engineering , 29 (3), 309 – 319. https://doi.org/10.1016/s1359-8368(97)00011-5 Stepashkin, Chukov, D. I., Senatov, F. S., Salimon, A. I., Korsunsky, A. M., & Kaloshkin, S. D. (2018). 3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties. Composites Science and Technology , 164 , 319 – 326. https://doi.org/10.1016/j.compscitech.2018.05.032 Takahashi, R., Shohji, I., Seki, Y., & Maruyama, S. (2014). Effect of fiber direction and temperature on mechanical properties of short fiber reinforced PPS. 2014 International Conference on Electronics Packaging, ICEP 2014 , 778 – 781. https://doi.org/10.1109/ICEP.2014.6826787 Tsai-Hill Criterion . (n.d.). Zhang, K., Zhang, G., Liu, B., Wang, X., Long, S., & Yang, J. (2014). Effect of aminated polyphenylene sulfide on the mechanical properties of short carbon fiber reinforced polyphenylene sulfide composites. Composites Science and Technology , 98 , 57 – 63. https://doi.org/10.1016/j.compscitech.2014.04.020 Zhao, Y., Chen, Y., & Zhou, Y. (2019). Novel mechanical models of tensile strength and elastic property of FDM AM PLA materials: Experimental and theoretical analyses. Materials and Design , 181 . https://doi.org/10.1016/j.matdes.2019.108089