PSI - Issue 56

Sai Kumar Balla et al. / Procedia Structural Integrity 56 (2024) 41–48 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

48 8

Selective Laser Melting. Journal of Materials Engineering and Performance , 30 (7), 4966 – 4973. https://doi.org/10.1007/s11665-021 05573-y Shrivastava, A., Anand Kumar, S., Nagesha, B. K., & Suresh, T. N. (2021). Electropolishing of Inconel 718 manufactured by laser powder bed fusion: Effect of heat treatment on hardness, 3D surface topography and material ratio curve. Optics and Laser Technology , 144 (August), 107448. https://doi.org/10.1016/j.optlastec.2021.107448 Siddique, S., Imran, M., Wycisk, E., Emmelmann, C., & Walther, F. (2015). Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting. Journal of Materials Processing Tech. , 221 , 205 – 213. https://doi.org/10.1016/j.jmatprotec.2015.02.023 Spierings, A. B., Herres, N., & Levy, G. (2011). Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts. Rapid Prototyping Journal , 17 (3), 195 – 202. https://doi.org/10.1108/13552541111124770 Suzuki, A., Miyasaka, T., Takata, N., Kobashi, M., & Kato, M. (2021). Control of microstructural characteristics and mechanical properties of AlSi12 alloy by processing conditions of laser powder bed fusion. Additive Manufacturing , 48 (PA), 102383. https://doi.org/10.1016/j.addma.2021.102383 Takata, N., Liu, M., Kodaira, H., Suzuki, A., & Kobashi, M. (2020). Anomalous strengthening by supersaturated solid solutions of selectively laser melted Al – Si-based alloys. Additive Manufacturing , 33 (January), 101152. https://doi.org/10.1016/j.addma.2020.101152 Teimouri, R., Sohrabpoor, H., Grabowski, M., Wyszyńsk i, D., Skoczypiec, S., & Raghavendra, R. (2022). Simulation of surface roughness evolution of additively manufactured material fabricated by laser powder bed fusion and post-processed by burnishing. Journal of Manufacturing Processes , 84 (June), 10 – 27. https://doi.org/10.1016/j.jmapro.2022.09.045 Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., & Martina, F. (2016). Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints. CIRP Annals - Manufacturing Technology , 65 (2), 737 – 760. https://doi.org/10.1016/j.cirp.2016.05.004 Varghese, V., & Mujumdar, S. (2021). Micromilling-induced surface integrity of porous additive manufactured Ti6Al4V alloy. Procedia Manufacturing , 53 (2020), 387 – 394. https://doi.org/10.1016/j.promfg.2021.06.041