PSI - Issue 56

Balichakra Mallikarjuna et al. / Procedia Structural Integrity 56 (2024) 184–189 Mallikarjuna / Structural Integrity Procedia 00 (2019) 000 – 000

189

6

Hajializadeh, F., & Ince, A. (2020). Short review on modeling approaches for metal additive manufacturing process. Material Design & Processing Communications , 2 (2), 0 – 2. https://doi.org/10.1002/mdp2.56 Hazarika, B., Mallikarjuna, Krishna, P., Balla, V. K., & Bontha, S. (2016). Numerical modelling of laser additive manufacturing processes. NAFEMS India Regional Conference , 8 , 30 – 31. Kamara, A. M., Marimuthu, S., & Li, L. (2011). A numerical investigation into residual stress characteristics in laser deposited multiple layer waspaloy parts. Journal of Manufacturing Science and Engineering , 133 (3), 031013. https://doi.org/10.1115/1.4003833 Liu Weiping and John DuPont. (n.d.). Fabrication of Titanium Aluminide Matrix Composites by Laser Engineered Net Shaping. Atlantic , 124 – 132. Mallikarjuna. (2020). Effect of process variables on residual stress and microstructure in laser additive manufacturing of γ -TiAl alloy [NATIONAL INSTITUTE OF TECHNOLOGY KARNATAKA]. https://idr.nitk.ac.in/jspui/handle/123456789/16897 Mallikarjuna, B., Bontha, S., Krishna, P., & Balla, V. K. (2021). Characterization and thermal analysis of laser metal deposited γ -TiAl thin walls. Journal of Materials Research and Technology , 15 (12), 6231 – 6243. https://doi.org/10.1016/j.jmrt.2021.10.133 Mallikarjuna, B., & Reutzel, E. W. (2022). Reclamation of intermetallic titanium aluminide aero-engine components using directed energy deposition technology. Manufacturing Review , 9 (27), 1 – 21. https://doi.org/10.1051/mfreview/2022024 Manvatkar, V. D., Gokhale, A. A., Reddy, G. J., & Venkataramana, A. (2011). Estimation of melt pool dimensions , thermal cycle , and hardness distribution in the laser-engineered net shaping process of austenitic stainless steel. Metallurgical and Materials Transactions A , 42A . https://doi.org/10.1007/s11661-011-0787-8 Marimuthu, S., Clark, D., Allen, J., Kamara, A. M., Mativenga, P., Li, L., & Scudamore, R. (2013). Finite element modelling of substrate thermal distortion in direct laser additive manufacture of an aero-engine component. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , 227 (9), 1987 – 1999. https://doi.org/10.1177/0954406212470363 Murr, L. E., Gaytan, S. M., Ceylan, A., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. a., Medina, F., Collins, S., & Wicker, R. B. (2009). Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting. Acta Materialia , 58 (5), 1887 – 1894. https://doi.org/10.1016/j.actamat.2009.11.032 Roberts, I. A., Wang, C. J., Esterlein, R., Stanford, M., & Mynors, D. J. (2009). A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing. International Journal of Machine Tools and Manufacture , 49 (12 – 13), 916 – 923. https://doi.org/10.1016/j.ijmachtools.2009.07.004 Roberts, I. A., Wang, C. J., Kibble, K. A., Stanford, M., Mynors, D. J., & Kingdom, U. (2012). Numerical and experimental studies on the laser melting of steel plate surfaces . 2 – 5. Shen, N., & Chou, K. (2012). Thermal modeling of electron beam additive manufacturing process – powder sintering effects. Proceedins of the ASME 2012 International Manufacturing Science and Engineering Conference June 4-8, 2012, Notre Dame, Indiana, USA , 1 – 9. Wang, J., Pan, Z., Wei, L., He, S., Cuiuri, D., & Li, H. (2019). Introduction of ternary alloying element in wire arc additive manufacturing of titanium aluminide intermetallic. In Additive Manufacturing (Vol. 27, pp. 236 – 245). https://doi.org/10.1016/j.addma.2019.03.014 Wang, L., Felicelli, S., Gooroochurn, Y., Wang, P. T., & Horstemeyer, M. F. (2008). Optimization of the LENS® process for steady molten pool size. Materials Science and Engineering A , 474 (1 – 2), 148 – 156. https://doi.org/10.1016/j.msea.2007.04.119 Zhang, J., Liou, F., Seufzer, W., & Taminger, K. (2016). A coupled finite element cellular automaton model to predict thermal history and grain morphology of Ti-6Al-4V during direct metal deposition (DMD). Additive Manufacturing , 11 (Dmd), 32 – 39. https://doi.org/10.1016/j.addma.2016.04.004