PSI - Issue 56

www.elsevier.com/locate/procedia

Available online at www.sciencedirect.com Available online at www.sciencedirect.com ScienceDirect Structural Integrity Procedia 00 (2023) 000–000 ScienceDirect Structural Integrity Procedia 00 (2023) 000–000

www.elsevier.com/locate/procedia

ScienceDirect Structural Integrity and Reliability of Advanced Materials obtained through Additive Manufacturing (SIRAMM23) Editorial Liviu Marsavina a *, Roberto Brighenti b , Aleksandar Sedmak c , Lubos Nahlik d , Filippo Berto e a University Politehnica Timisoara, Department of Mechanics and Strength of Materials, Blvd. M. Viteazu 1, Timisoara 300222, Romania b University of Florence, Department Civil and Environmental Engineering, Via di S. Marta 3, 50139 Florence, Italy c University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11120 Belgrade, Serbia d Czech Academy of Sciences, Institute of Physics of Materials, Žižkova 22, 616 62 Brno, Czech Republic e University Sapienza Roma, Department of Chemical Engineering Materials Environmen, Via Eudossiana 18, 00184 Roma, Italy Structural Integrity and Reliability of Advanced Materials obtained through Additive Manufacturing (SIRAMM23) Editorial Liviu Marsavina a *, Roberto Brighenti b , Aleksandar Sedmak c , Lubos Nahlik d , Filippo Berto e a University Politehnica Timisoara, Department of Mechanics and Strength of Materials, Blvd. M. Viteazu 1, Timisoara 300222, Romania b University of Florence, Department Civil and Environmental Engineering, Via di S. Marta 3, 50139 Florence, Italy c University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11120 Belgrade, Serbia d Czech Academy of Sciences, Institute of Physics of Materials, Žižkova 22, 616 62 Brno, Czech Republic e University Sapienza Roma, Department of Chemical Engineering Materials Environmen, Via Eudossiana 18, 00184 Roma, Italy Procedia Structural Integrity 56 (2024) 1–2 Structural Integrity and Reliability of Advanced Materials obtained through Additive Manufacturing (SIRAMM23) Editorial Liviu Marsavina a *, Roberto Brighenti b , Aleksandar Sedmak c , Lubos Nahlik d , Filippo Berto e a University Politehnica Timisoara, Department of Mechanics and Strength of Materials, Blvd. M. Viteazu 1, Timisoara 300222, Romania b University of Florence, Department Civil and Environmental Engineering, Via di S. Marta 3, 50139 Florence, Italy c University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11120 Belgrade, Serbia d Czech Academy of Sciences, Institute of Physics of Materials, Žižkova 22, 616 62 Brno, Czech Republic e University Sapienza Roma, Department of Chemical Engineering Materials Environmen, Via Eudossiana 18, 00184 Roma, Italy © 2023 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the SIRAMM23 organizers © 2023 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the SIRAMM23 organizers The International Conference on Structural Integrity and Reliability of Advanced Materials obtained through Additive Manufacturing (SIRAMM23), was organized at the University Politehnica Timisoara, Romania, in cooperation with TC13: EDUCATION AND TRAINING and TC15:STRUCTURAL INTEGRITY OF ADDITIVE MANUFACTURED COMPONENTS of the European Structural Integrity Society (ESIS), March 8 th -11 th 2023 as the final conference of the European Twinning project on Structural Integrity and Reliability of Advanced Materials obtained through additive Manufacturing , H2020-WIDESPREAD-2018-03 under the grant agreement No. 857124. © 2023 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the SIRAMM23 organizers The International Conference on Structural Integrity and Reliability of Advanced Materials obtained through Additive Manufacturing (SIRAMM23), was organized at the University Politehnica Timisoara, Romania, in cooperation with TC13: EDUCATION AND TRAINING and TC15:STRUCTURAL INTEGRITY OF ADDITIVE MANUFACTURED COMPONENTS of the European Structural Integrity Society (ESIS), March 8 th -11 th 2023 as the final conference of the European Twinning project on Structural Integrity and Reliability of Advanced Materials obtained through additive Manufacturing , H2020-WIDESPREAD-2018-03 under the grant agreement No. 857124. www.elsevier.com/locate/procedia © 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the SIRAMM23 organizers The general aim of the conference was to promote international collaboration and share current knowledge on the structural integrity and design of additively manufactured (AM) materials and the related disciplines. Of particular interest is understanding the role of AM printing conditions and parameters on the final reliability and safety of the obtained materials, a crusial aspect especially for AM materials used in load bearing applications. The general aim of the conference was to promote international collaboration and share current knowledge on the structural integrity and design of additively manufactured (AM) materials and the related disciplines. Of particular interest is understanding the role of AM printing conditions and parameters on the final reliability and safety of the obtained materials, a crusial aspect especially for AM materials used in load bearing applications. The International Conference on Structural Integrity and Reliability of Advanced Materials obtained through Additive Manufacturing (SIRAMM23), was organized at the University Politehnica Timisoara, Romania, in cooperation with TC13: EDUCATION AND TRAINING and TC15:STRUCTURAL INTEGRITY OF ADDITIVE MANUFACTURED COMPONENTS of the European Structural Integrity Society (ESIS), March 8 th -11 th 2023 as the final conference of the European Twinning project on Structural Integrity and Reliability of Advanced Materials obtained through additive Manufacturing , H2020-WIDESPREAD-2018-03 under the grant agreement No. 857124. The general aim of the conference was to promote international collaboration and share current knowledge on the structural integrity and design of additively manufactured (AM) materials and the related disciplines. Of particular interest is understanding the role of AM printing conditions and parameters on the final reliability and safety of the obtained materials, a crusial aspect especially for AM materials used in load bearing applications. 2452-3216 © 2023 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the SIRAMM23 organizers 2452-3216 © 2023 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the SIRAMM23 organizers 2452-3216 © 2023 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the SIRAMM23 organizers * Corresponding author. Tel.: +40726397635. E-mail address: liviu.marsavina@upt.ro * Corresponding author. Tel.: +40726397635. E-mail address: liviu.marsavina@upt.ro * Corresponding author. Tel.: +40726397635. E-mail address: liviu.marsavina@upt.ro

2452-3216 © 2023 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the SIRAMM23 organizers 10.1016/j.prostr.2024.02.029