PSI - Issue 56

Zorana Golubovic et al. / Procedia Structural Integrity 56 (2024) 153–159 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

159

7

The general conclusion is that ABS resin material has shown its benefits in comparison with well-known standard ABS material used in FDM technology. Depending on the Vat photopolymerization technology used, the ABS resin material may offer higher elongation and energy absorption or it can exhibit higher strength. In that sense, SLA technology provides AM parts with better tensile strength, while DLP enables tougher components. Acknowledgements This research was financially supported by the Ministry of Science, Technology Development and Innovation of the Republic of Serbia by Contract No. 451-03-47/2023-01/200105 from 03.02.2023. This research is supported also by European Union’s Horizon 2020 research and innovation program “SIRAMM”, under grant agreement N o. 857124. References Ngo, T.D., Kashani, A., Imbalzano, G., Nguyen, K.T.Q., Hui, D., 2018. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Compos. Part B Eng., 143, 172 – 196 Samykano, M., Selvamani, S.K., Kadirgama, K., Ngui, W.K., Kanagaraj, G., Sudhakar, K., 2019. Mechanical property of FDM printed ABS: influence of printing parameters, The International Journal of Advanced Manufacturing Technology, 102, 2779 – 2796. https://doi.org/10.1007/s00170-019-03313-0 Milovanović, A., Golubović, Z., Babinský, T., Šulák, I., Mitrović, A., 2022. Tensile Properties of Polypropylene Additively M anufactured by FDM. Structural Integrity and Life Vol. 22, No 3, pp. 305 – 308 Voet, V.S.D., Strating, T., Schnelting, G.H.M., Dijkstra, P., Tietema, M., Xu, J., Woortman, A.J.J., Loos, K., Jager, J., Folkersma, R., 2018. Biobased Acrylate Photocurable Resin Formulation for Stereolithography 3D Printing, ACS Omega 2018, 3, 1403−1408. doi: 10.1021/acsomega.7b01648 Shah, D.M., Morris, J., Plaisted, T.A., Amirkhizi, A.V., Hansen, C.J., 2020. Highly Filled Resins for DLP-based Printing of Low Density, High Modulus Materials, Additive Manufacturing, doi: https://doi.org/10.1016/j.addma.2020.101736 Abeykoon, C., Sri-Amphorn, P., Fernando, A., 2020. Optimization of fused deposition modeling parameters for improved PLA and ABS 3D printed structures, International Journal of Lightweight Materials and Manufacture, 3, 284-297. https://doi.org/10.1016/j.ijlmm.2020.03.003 Milovanović, A., Milošević, M., Mladenović, G., Likozar, B., Čolić, K., Mitrović, N., 2019. Experimental Dimensional Accuracy Analysis of Reformer Prototype Models Produced by FDM and SLA 3D Printing Technology, in ‘’Experimental and Numerical Investigations in M aterials Science an d Engineering’’. In: Mitrović, N., Milošević, M., Mladenović, G. (Ed.). Springer, Cham, pp. 84 -95. Zhu, Z.H., Zhang, N., Wang, T., Hao, M.Y., 2020. Short Review of Polymer Composites for 3D Printing, IOP Conf. Ser.: Mater. Sci. Eng. 758 012046. doi: 10.1088/1757-899X/758/1/012046 W. Grellmann et al. (eds.), 2001. Deformation and Fracture Behaviour of Polymers, Springer-Verlag Berlin Heidelberg. ISBN: 978-3-662-04556 5 Bernal, C. R., Frontini, P. M., Sforza, M., & Bibbó, M. A. 1995. Microstructure, deformation, and fracture behavior of commercial ABS resins. Journal of Applied Polymer Science, 58(1), 1 – 10. doi:10.1002/app.1995.070580101 Golubović , Z., Danilov , I., Bojović , B., Petrov , Lj., Sedmak , A., Mišković , Ž., Mitrović , N. , 2023. Comprehensive mechanical examination of ABS and ABS - like polymers additively manufactured by material extrusion and vat photopolymerization processes, Polymers, 15(21), 4197; https://doi.org/10.3390/polym15214197