PSI - Issue 56

Laszlo Racz et al. / Procedia Structural Integrity 56 (2024) 3–10

10 8

Author name / Structural Integrity Procedia 00 (2019) 000–000

Acknowledgements Computations were done on the computing infrastructure of the CLOUDUT Project, cofunded by the European Fund of Regional Development through the Competitiveness Operational Programme 2014-2020, contract no. 235/2020. References Singh, S., Singh, G., Prakash, C., & Ramakrishna, S. (2020). Current status and future directions of fused filament fabrication. Journal of Manufacturing Processes, 55, 288-306. Lalegani Dezaki, M., Mohd Ariffin, M. K. A., & Hatami, S. (2021). An overview of fused deposition modelling (FDM): Research, development and process optimisation. Rapid Prototyping Journal, 27(3), 562-582. Bakır, A. A., Atik, R., & Özerinç, S. (2021). Mechanical properties of thermoplastic parts produced by fused deposition model ing: a review. Rapid Prototyping Journal 27(3), 537-561. Khan, I., & Kumar, N. (2021). Fused deposition modelling process parameters influence on the mechanical properties of ABS: A review. Materials Today: Proceedings, 44, 4004-4008. Popescu, D., Zapciu, A., Amza, C., Baciu, F., & Marinescu, R. (2018). FDM process parameters influence over the mechanical properties of polymer specimens: A review. Polymer Testing, 69, 157-166. Dudescu, C., & Racz, L. (2017). Effects of raster orientation, infill rate and infill pattern on the mechanical properties of 3D printed materials. Acta Universitatis Cibiniensis. Technical Series, 69(1), 23-30. Sajjad, R., Butt, S. U., Saeed, H. A., Anwar, M. T., & Rasheed, T. (2023). Impact of multiple infill strategy on the structural strength of single build FDM printed parts. Journal of Manufacturing Processes, 89, 105-110. Lalegani Dezaki, M., & Mohd Ariffin, M. K. A. (2020). The effects of combined infill patterns on mechanical properties in fdm process. Polymers, 12(12), 2792. Gurrala, P. K., & Regalla, S. P. (2014). Part strength evolution with bonding between filaments in fused deposition modelling: This paper studies how coalescence of filaments contributes to the strength of final FDM part. Virtual and Physical Prototyp-ing, 9(3), 141-149. Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008). Effect of processing conditions on the bonding quality of FDM polymer filaments. Rapid prototyping journal, 14, 72-80. Garg A, Bhattacharya A. An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental study. (2017) International Journal of Mechanical Sciences, 120, 225-36 Górski, F., Kuczko, W., Wichniarek, R., & Hamrol, A. (2015). Computation of mechanical properties of parts manufactured by fused deposition modeling using finite element method. In 10th International Conference on Soft Computing Models in Industrial and Environmental Applications (pp. 403-413). Springer, Cham. Paul, S. (2021). Finite element analysis in fused deposition modeling research: A literature review. Measurement, 178, 109320. Racz, L., & Dudescu, M. C. (2022). Numerical Investigation of the Infill Rate upon Mechanical Proprieties of 3D-Printed Materials. Polymers, 14(10).