PSI - Issue 52

Francisco de Sá Rodrigues et al. / Procedia Structural Integrity 52 (2024) 719–729 F. de Sa´ Rodrigues et al. / Structural Integrity Procedia 00 (2023) 000–000

729

11

References

Bekas, D.G., Gkikas, G., Maistros, G.M. and Paipetis, A.S., 2016, On the use of dielectric spectroscopy for the real time assessment of the dispersion of carbon nanotubes in epoxy, 6.82: 78838–78845 Bekas, D.G., Sharif-Khodaei, Z., Baltzis, D., Aliabadi, F.M.H., Paipetis, A.S., 2019, Quality assessment and damage detection in nanomodified adhesively-bonded composite joints using inkjet-printed interdigital sensors. Composite Structures, 211, 557-563 Bekas, D. G., Sharif-Khodaei, Z., Aliabadi, F. M.H., 2019. A smart multi-functional printed sensor for monitoring curing and damage of composite repair patch. Smart Materials and Structures 28, 085029 de Sa´ Rodrigues, F., Giannakeas, I., Sharif-Khodaei, Z., Aliabadi, F.M.H., 2023, Probability based damage detection on a composite fuselage panel based on large data set of guided wave signals. de Sa´ Rodrigues, F., Amin Seno, A., Sharif-Khodaei, Z., Aliabadi, F.M.H., 2022, Structural Health Monitoring platform for industrial scale com posite structures, den Otter, M. W., 2002, Approximate expressions for the capacitance and electrostatic potential of interdigitated electrodes, Sensors and Actuators A: Physical 96.2, 140-144 Higgins, A., 2000, Adhesive bonding of aircraft structures, International Journal of Adhesion and Adhesives 20.5, 367–376 Kalkanis, K., Tsamasphyros, G. J., Kanderakis, G. N., Pantelelis, N., Tur, M., Maistros, G., & Botsev, Y., 2011, Experimental control of curing via dielectric and fibre Bragg grating sensors for composite patch repairs. Sensor Letters, 9(4), 1265-1272. Mijovic´, J., Kenny, J.M., Ma ff ezzoli A., Trivisano, A., Belluci, F., Nicolais, L., 1993, The principles of dielectric measurements for in situ moni toring of composite processing, Composites Science and Technology, 49.3: 277-290 Sharif-Khodaei, Z., Ghajari, M., Aliabadi, M.H., 2015, Impact damage detection in composite plates using a self-diagnostic electro-mechanical impedance-based structural health monitoring system. Journal of Multiscale Modelling, 6.04: 1550013. Skordos, A.A. and Partridge, I.K., 2004, Determination of the degree of cure under dynamic and isothermal curing conditions with electrical impedance spectroscopy. J. Polym. Sci. B Polym. Phys., 42: 146-154. von Hippel, A. R., Morgan, S.O., 1955, Dielectrics and Waves, Journal of The Electrochemical Society 102.3, 68C Yue, N., Sharif-Khodaei, Z. and Aliabadi, M.H., 2018 ”An innovative secondary bonding of sensors to composite structures for SHM application.” Key Engineering Materials. Vol. 774. Trans Tech Publications Ltd, Yue, N., Sharif-Khodaei, Z. and Aliabadi, M.H., 2021, Damage detection in large composite sti ff ened panels based on a novel SHM building block philosophy, Smart Materials and Structures 30, 045004 Igreja, R., Dias, C.J., 2004, Analytical evaluation of the interdigital electrodes capacitance for a multi-layered structure,Sensors and Actuators A: Physical, 112(2-3), 291–301