PSI - Issue 52

Valery Shlyannikov et al. / Procedia Structural Integrity 52 (2024) 214–223 V.Shlyannikov,A.Sulamanidze,D.Kosov/ Structural Integrity Procedia 00 (2023) 000 – 000

223

10

References

Gayda, J., Miner, R., 1983. Fatigue crack initiation and propagation in several nickel-base superalloys at 650°C. International Journal of Fatigue 5, 135 – 143. Onofrio, G., Osinkolu, G., Marchionni, M., 2001. Fatigue crack growth of UDIMET 720 Li superalloy at elevated temperature. International Journal of Fatigue 23, 887 – 895. Pineau, A., McDowell, D., Busso, E., Antolovich, S., 2016. Failure of metals II: Fatigue. Acta Materialia 107, 484 – 507. Narasimhachary, S., Saxena A., 2013. Crack growth behavior of 9Cr-1Mo (P91) steel under creep-fatigue conditions. International Journal of Fatigue 56:106-113. Ro, U., Kim, S., Kim, Y., Kim., M., 2021. Creep-Fatigue damage analysis of modified 9Cr – 1Mo steel based on a Voronoi crystalline model. International Journal of Pressure Vessels and Piping 194, 104541. Garnadt, F., Kontermann, C., Oechsner, M., 2022. Early Crack Growth from Notches under Creep-Fatigue Loading. Procedia Structural Integrity 42, 1113 – 1120. Stekovic, S., Jones, J., Engel, B., Whittaker, M., Norman, V., Rouse, J., Pattison, S., Hyde, C., Härnman, P., Lancaster, R., Leidermark, D., Moverare, J., 2020. DevTMF – Towards code of practice for thermo-mechanical fatigue crack growth. International Journal of Fatigue 138, 1-7. Palmer, J., Jones, J., Dyer, A., Smith, R., Lancaster, R., Whittaker, M., 2019. Development of test facilities for thermo-mechanical fatigue testing. International Journal of Fatigue 121, 208-218. Pretty, C., Whitaker, M., Williams, S., 2017. Thermo-mechanical fatigue crack growth of RR1000. Materials 10 (1), 1-20. Jones, J., Whittaker, M., Lancaster, R., Hyde, C., Rouse, J., Engel, B., Pattison, S., SStekovic, S., Jackson, C., Li, H., 2020. The effect of phase angle on crack growth mechanisms under thermomechanical fatigue loading. International Journal of Fatigue 135, 105539. Norman, V., Stekovic, S., Jones, J., Whittaker, M., Grant, B., 2020. On the mechanistic difference between in-phase and out-of-phase thermomechanical fatigue crack growth. International Journal of Fatigue 135, 1-11. Segersall, M., Deng, D., 2021. A comparative study between in- and out-of-phase thermomechanical fatigue behaviour of a single-crystal superalloy. International Journal of Fatigue 146, 1-13. Kitaguchi, H., Li, H., Evans, H., Ding, R., Jones, I., Baxter, G., Bowen, P., 2013. Oxidation ahead of a crack tip in an advanced Ni-based superalloy. Acta Materialia. 61 (6), 1968-1981. Karabela, A., Zhao, L., Lin, B., Tong, J., Hardy, M., 2013. Oxygen diffusion and crack growth for a nickel-based superalloy under fatigue oxidation conditions. Material Science and Engineering A 567, 46-57. Xu, C., Yao, Z., Dong, J., Jiang, Y., 2019. Mechanism of high-temperature oxidation effects in fatigue crack propagation and fracture mode for FGH97 superalloy. Rare Metals 38 (7), 642-652. ANSYS Academic Research Electronics, Fluent, Mechanical APDL Release 2021 R1, ANSYS, Inc. Palmert, F., Moverare, J., Gustafsson, D., 2019, Thermomechanical fatigue crack growth in a single crystal nickel base superalloy. International Journal of Fatigue 122, 184-198. Ewest, D., Almroth, P., Sjödin, B., Simonsson, K., Leidermark, D., Moverare, J., 2016. A modified compliance method for fatigue crack propagation applied on a single edge notch specimen. International Journal of Fatigue 92 61-70. Fischer, C., Schweizer, C., Seifert, T., 2016. A crack opening stress equation for in-phase and out-of-phase thermomechanical fatigue loading. International Journal of Fatigue 88, 178-184. Fischer, C., Schweizer, C., Seifert T., 2015. Assessment of fatigue crack closure under in-phase and out-of-phase thermomechanical fatigue loading using a temperature dependent strip yield model. International Journal of Fatigue 78, 22-30.