PSI - Issue 5

Nikolai Kashaev et al. / Procedia Structural Integrity 5 (2017) 263–270 Jin Lu et al. / Structural Integrity Procedia 00 (2017) 000 – 000

270

8

References

Akhurst, K.N., Lindley, T.C., Nix, K.J., 1983. The effect of mode III loading on fatigue crack growth in a rotating shaft. Fatigue & Fracture of Engineering Materials & Structures 6(4), 345-348. Bergner, F., Zouhar, G., Tempus, G., 2001. The material-dependent variability of fatigue crack growth rates of aluminium alloys in the Paris regime. International Journal of Fatigue 23(5), 383-394. Bhaumik, S.K., Sujata, M., Suresh Kumar, M., Venkataswamy, M.A., Parameswara, M.A., 2007. Failure of an intermediate gearbox of a helicopter. Engineering Failure Analysis 14(1), 85-100. Bucci, R.J., 2006. Advanced metallic and hybrid structural concepts: tailorable solutions to meet the demanding performance/affordability requirements of tomorrow’s aircraft. In : The Aircraft Structural Integrity Program Conference (ASIP 2006), San Antonio, USA. Cai, C., Ji, Z., Zhang, H., Wang, G., 2009. Study on the microstructure and texture of 3003 aluminium sheets rolled by laser-textured roll. Journal of Metallurgy 2009, Article ID 587938. Ehrström, J.C., van der Veen, S., Arsène, S., and Muzzolini, R., 2005. Improving damage tolerance of integrally machined panels. In: The 23rd Symposium of International Committee on Aeronautical fatigue (ICAF 2005), In: Dalle Donne, C., (Ed.), Hamburg, Germany, pp. 79-90. Fonte, M., Reis, L., Romeiro, F., Li, B., Freitas, M., 2006. The effect of steady torsion on fatigue crack growth in shafts. International Journal of Fatigue 28(5-6), 609-617. De Freitas, M., Reis, L., da Fonte, M., Li, B., 2011. Effect of steady torsion on fatigue crack initiation and propagation under rotating bending: Multiaxial fatigue and mixed-mode cracking. Engineering Fracture Mechanics 78(5), 826-835. Goranson, U.G., 2007. Damage Tolerance – Facts and Fiction, Keynote Presentation, International Conference on Damage Tolerance of Aircraft Structures, Delft, The Netherlands. Heerens, J., Schödel, M., 2009. Characterization of stable crack extension in aluminium sheet material using the crack tip opening angle determined optically and by the δ 5 clip gauge technique. Engineering Fracture Mechanics 76(1), 101-113. Lu, J., Kashaev, N., Ventzke, V., Huber, N., 2015a. Influence of materials on the effectiveness of crenellations in the damage tolerant design. In: Proceedings of the 34 th Conference and the 28 th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity, Helsinki, Finland, pp. 483-494. Lu, J., Huber, N., Kashaev, N., 2015b. Influence of the geometry on the fatigue performance of crenellated fuselage panels. Ciência & Tecnologia dos Materiais 27, 99-106. Materna, A., Oliva, V., 2005. Stress and strain in front of the fatigue crack with shear lips. In: Proceeding of the 11 th International Conference on Fracture. Turin, Italy, pp. 2692-2697. Morgeneyer, T.F., 2008. Micromechanical studies and modelling of toughness in high strength almuinium alloys, doctor thesis, University of Southampton, Southampton, UK. Muzzolini, R., Ehrström, J.-C., 2004. Damage tolerance of integral structures with crack retardation features. In: Proceedings of the 15th Advanced Aerospace Materials & Processes Conference and Exposition (AeroMat 2004), Seattle, USA. Ritchie, R.O., 1988. Mechanisms of fatigue crack propagation in metals, ceramics and composites: Role of crack tip shielding. Materials Science and Engineering: A, 103(1), 15-28. Schijve, J., 1988. Fatigue Crack Closure: Observations and Technical Significance, in “ Mechanics of Fatigue Crack Closure, ASTM STP 982 ”. American Society for Testing and Materials. Philadelphia, pp. 5-34. Schijve, J., 2009. Chapter 8: Fatigue Crack Growth. Analysis and Predictions, in “ Fatigue of Structures and Materials, 2 nd ed .”. Springer, Delft, The Netherlands, pp. 209-258. Seo, K.-J., Lee, J.-M., Choi, B.-H., 2012. Investigation of the Effect of the Roughness-Induced Crack Closure on the Fatigue Crack Propagation Behavior of Hot-Rolled Steels under Mixed-Mode Loading Conditions. Materials Transactions 53(2), 264-269. Suresh, S., Ritchie, R.O., 1982. A geometric model for fatigue crack closure induced by fracture surface roughness. Metallurgical transactions A 13(9), 1627-1631. Suwas, S., Ray, R.K., 2014. Crystallographic Texture of Materials, Springer-Verlag, London, UK. Tchorzewski, R.M., Hutchinson, W.B., 1978. Anisotropy of fracture toughness in textured titanium-6Al-4V alloy. Metallurgical Transactions A 9(8), 1113-1124. Tsivoulas, D., 2010. Effects of combined Zr and Mn additions on the microstructure and properties of AA2198 sheet, doctor thesis, University of Manchester, Manchester, UK. Uz, M.-V., Koçak, M., Lemaitre, F., Ehrström, J.-C., Kempa, S., Bron, F., 2009. Improvement of damage tolerance of laser beam welded stiffened panels for airframes via local engineering. International Journal of Fatigue 31, 916-926. Uz, M.V., 2010. Improvement of Damage Tolerance of Laser Beam Welded Aerospace Structures via Local Engineering, doctor thesis, Hamburg University of Technology, Hamburg, Germany. Zuidema, J., 1995. Square and Slant Fatigue Crack Growth in Al 2024, doctor thesis, Delft University of Technology, Delft, Netherlands. Zuidema, J., Krabbe, J.P., 1997. The effect of regular and irregular shear lips on fatigue crack growth in Al 2024. Fatigue & Fracture of Engineering Materials & Structures 20(10), 1413-1422. Zuidema, J., Veer, F., van Kranenburg, C., 2005. Shear lips on fatigue fracture surfaces of aluminum alloys. Fatigue & Fracture of Engineering Materials & Structures 28(1-2), 159-167.