PSI - Issue 5

Zuheir Barsoum et al. / Procedia Structural Integrity 5 (2017) 1401–1408 Zuheir Barsoum / Structural Integrity Procedia 00 (2017) 000 – 000

1408

8

Acknowledgements

SSAB (Swedish Steel Company) and Cargotec Sweden AB Bromma Conquip is acknowledged for financial support, manufacturing of specimens and testing.

References

Eurocode 3, 2011. Design of steel structures - Part 1-8: Design of joints. AWS D1.1, 2010. Structural welding (steel) Darrel P. Gagnon, D.J. Laurie Kennedy,1989. Behavior and ultimate tensile strength of partial joint penetration groove welds , Canadian Journal of Civil Engineering 16, 384- 399. Lesik D. F., D.J. Laurie Kennedy, 1990. Ultimate strength of fillet welded connections loaded in plane , Canadian Journal of Civil Engineering 17, 55-67. Satoh, K., Toyoda, M., 1975. Joint strength of heavy plates with lower strength weld metal , Welding research supplement, pp. 311-319. Björk T., Toivonen J., Nykänen T, 2012. Capacity of fillet welded joints made of ultra-high strength steel , Welding in the world. DOI.10.1007/BF03321337. ’ Collin P., Johansson B .,2005, ‘Design of welds in high strength steels,’ Proceedings of the 4th European Conference on Steel and Composite Structures, Maastricht, Volume C. Rafael Picón R., Cañas J.,2009. On strength criteria of fillet welds , International journal of Mechanical Sciences 51 pp 609 618.doi:10.1016/j.matdes.2012.03.048. Hobbacher, 2007. Recommendation for fatigue design of welded joints and components , IIW document XIII-2151-07/XV-1254-07. EN 9018, 2010. Destructive tests of welds in metallic materials – Tensile test of cruciform and lapped joints. Khushid M., Barsoum Z., Mumtaz N.A., 2012. Ultimate strength and failure modes for fillet welds in high strength steels , Journal of Materials and Design, Vol 40, pp.36-42. Khurshid M., Barsoum Z., Barsoum I., 2015. Load carrying capacities of butt welded joints in high strength steels , ASME Journal of Engineering Materials and Technology, Vol. 137, pp. 1-9. Barsoum Z., Khurshid M., Barsoum I., 2012. Fatigue strength evaluation of friction stir welded aluminum joints using the nominal and notch stress concepts , Journal of Materials and Design, Vol 41, pp. 231-238. Barsoum I., Khan F. and Barsoum Z., 2014. Optimization of the torsional strength of an induction hardened splined shaft , Materials and Design, Vol. 54, pp. 130 – 136.