PSI - Issue 44

Guadagnuolo M et al. / Procedia Structural Integrity 44 (2023) 942–949 Guadagnuolo et al. / Structural Integrity Procedia 00 (2022) 000–000

949

8

Cosenza, E., Manfredi, G., & Realfonzo, R., 2002. Development length of FRP straight rebars. Composites Part B: Engineering, 33(7), 493–504. https://doi.org/10.1016/S1359-8368(02)00051-3 Deng, F., Cao, C., Xu, L., & Chi, Y., 2022. Interfacial bond characteristics of polypropylene fiber in steel/polypropylene blended fiber reinforced cementitious composite. Construction and Building Materials, 341. https://doi.org/10.1016/j.conbuildmat.2022.127897 Eligehausen, R., Popov, E., & Bertero, V. (1982). Local Bond stress slip relationship of deformed bars under generalized excitations. Report No. UCB/EERC-83/23 Earthquake Engineering Research Center College of Engineering University of California Berkeley, California EOTA-ETAG 001, 2010. Guideline for european technical approval of metal anchors for use in concrete - Annex C: design methods for anchorages. Fuchs, W., & Hofmann, J., 2021. Post-installed reinforcing bars – Requirements for their reliable use. Developments in the Built Environment, 5 (December), 100040. https://doi.org/10.1016/j.dibe.2020.100040 Gao, K., Li, Z., Zhang, J., Tu, J., & Li, X., 2019. Experimental research on bond behavior between GFRP bars and stirrups-confined concrete. Applied Sciences (Switzerland), 9(7). https://doi.org/10.3390/app9071340 Gigla, B., 2004. Bond Strength of Injection Anchors as Supplementary Reinforcement Inside Historic Masonry. 13th International Brick and Block Conference, 119–128. Istruzioni CNR DT200 R1, 2013. Istruzioni per la Progettazione, l’Esecuzione ed il Controllo di Interventi di Consolidamento Statico mediante l’utilizzo di Compositi Fibrorinforzati. Greco, F., Leonetti, L., & Luciano, R., 2015. A multiscale model for the numerical simulation of the anchor bolt pull-out test in lightweight aggregate concrete. Construction and Building Materials, 95, 860–874. https://doi.org/10.1016/j.conbuildmat.2015.07.170 Hammerl, M., Stoi ber, N., Hammerle, J., Shams T. Bischoff, A., & Kromoser, B., 2021. Verbundverhalten umwickelter CFK-Stabe in Beton. Hariyadi, Munemoto, S., & Sonoda, Y., 2017. Experimental Analysis of Anchor Bolt in Concrete under the Pull-Out Loading. Procedia Engineering, 171, 926–933. https://doi.org/10.1016/j.proeng.2017.01.391 Li, C, Xian, G., 2020. Mechanical property evolution and life prediction of carbon fiber and pultruded carbon fiber reinforced polymer plate exposed to elevated temperatures. Polymer Composites; 41: 5143– 5155. https://doi.org/10.1002/pc.25782 Mosallam, AS, Ghabban, N, Mirnateghi, E, Agwa, AAK., 2022. Nonlinear numerical simulation and experimental verification of bondline strength of CFRP strips embedded in concrete for NSM strengthening applications. Structural Concrete, 23: 1794– 1815. https://doi.org/10.1002/suco.202100537 Kanakubo, T., Keisuke, Y., Fukuyama, H., Fujisawa, M., Sonobe, Y., 1993. Bond Performance of Concrete Members Reinforced with FRP Bars. American Concrete Institute SP-138, 138, 767–788. https://doi.org/10.14359/3956 Kang, B., Lee, C., Kim, S.-M., Yoo, H.-M., 2022. Processing and Evaluation of a Carbon Fiber Reinforced Composite Bar Using a Closed Impregnation Pultrusion System with Improved Production Speed. Applied Sciences, 12(10), 4906. https://doi.org/10.3390/app12104906 Kim, C. J., 2021. Modal parameter tracking in a carbon fiber-reinforced structure over different carbon fiber angles. Journal of Marine Science and Engineering, 9(11). https://doi.org/10.3390/jmse9111214 Larralde, J., Silva-Rodriguez, R., 1993. Bond and Slip of FRP Rebars in Concrete. Journal of Materials in Civil Engineering - J MATER CIVIL ENG, 5. https://doi.org/10.1061/(ASCE)0899-1561(1993)5:1(30) Lengsfeld, H., Mainka, H., Altstädt, V., 2020. Characterization of Carbon Fibers (pp. 75–104). https://doi.org/10.3139/9781569908297.004 Lu, C., & Sonoda, Y., 2021. An analytical study on the pull-out strength of anchor bolts embedded in concrete members by sph method. Applied Sciences (Switzerland), 11(18). https://doi.org/10.3390/app11188526 Malvar LJ., 1994. Bond stress–slip characteristics of FRP rebars. Technical Report TR-2013-SHR, Naval Facilities Engineering Service Center, Port Hueneme, California, CA 93043-4328; February, p.45. Maracci, D., Alfano, G., Serpieri, R., Lenci, S., 2018. Characterising interfaces for reinforced concrete: Experiments and multiplane cohesive zone modelling for titanium alloy rebars. European J. of Mechanics, A/Solids, 75, 258–276. https://doi.org/10.1016/j.euromechsol.2019.01.019 Mazhorova, N., Ivanov, P., Zaichenko, O., Lakhin, A., Kanterin, S., Tashchilov, S., 2021. Improvement of quality of carbon fiber rods by the impregnation of carbon fibers with oligoorganosiloxanes. Russian Chemical Bull., 70, 767–772. https://doi.org/10.1007/s11172-021-3149-8 Melatti, V., & D’Ayala, D., 2021. Displacement-based design procedure of grouted anchoring systems for the seismic upgrade of heritage buildings. Construction and Building Materials, 301(June), 124348. https://doi.org/10.1016/j.conbuildmat.2021.124348 Pepe, M., Mazaheripour, H., Barros, J., Sena-Cruz, J., Martinelli, E., 2013. Numerical calibration of bond law for GFRP bars embedded in steel fibre-reinforced self-compacting concrete. Composites Part B: Eng., 50, 403–412. https://doi.org/10.1016/j.compositesb.2013.03.006 Sadeghi, N., & Sharma, A., 2019. Pull-out test for studying bond strength in corrosion affected rc structures-a review. Ausziehtest zur untersuchung der verbundfestigkeit in korrosionsgeschädigten stahlbetonkonstruktio-nen-ein review. (Vol. 18). The International Federation for Structural Concrete (fib), 2000. Bulletin 10. Bond of reinforcement in concrete.. https://doi.org/10.35789/fib.BULL.0010 UNI EN 206, 2021. Concrete - Specification, performance, production and conformity. UN EN 1504-6, 2007. Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar UNI EN 1926, 2007. Natural stone test methods - Determination of uniaxial compressive strength. Tomasz, M., Szymon, D., Bartosz, B., Joanna, W., Paweł, Z., & Grzegorz, L., 2022. Flexural and compressive residual strength of composite bars subjected to harsh environments. Engineering Failure Analysis, 133, 105958. https://doi.org/10.1016/J.ENGFAILANAL.2021.105958 Zhao, X., He, X. J., Yan, S., & Anh, N. P., 2014. Computational and simulation analysis of pull-out fiber reinforced concrete. Advances in Materials Science and Engineering, 2014. https://doi.org/10.1155/2014/576052