PSI - Issue 44

Available online at www.sciencedirect.com Structural Integrity Procedia 00 (2022) 000–000 Available online at www.sciencedirect.com ScienceDirect

www.elsevier.com/locate/procedia

ScienceDirect

Procedia Structural Integrity 44 (2023) 1052–1059

© 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the scientific committee of the XIX ANIDIS Conference, Seismic Engineering in Italy. Abstract The Stick model is a Multi-degree of Freedom system consisting of a series of story-level lumped masses connected in series by non-linear shear springs suitably calibrated to simulate the interstory behavior. The Stick model has been recently introduced to predict the seismic performances of existing buildings in terms of engineering demand parameters, such as interstory drift ratios and peak floor accelerations, both at the building and at the large-scale level. This model has been demonstrated to predict the damage concentration and distribution with sufficient accuracy still preserving computational time with respect to refined finite element models. Previous works proposed a calibrated model to represent the behavior of existing gravity load-designed infilled building typologies. Recent advancements suggest the adoption of simplified procedures to generate interstory shear spring backbones allowing the extension of the model to different building typologies also accounting for possible retrofit interventions. In this paper, a simplified procedure is proposed to generate interstory shear spring backbones. The procedure allows generating interstory backbones accounting for typical features characterizing existing buildings, explicitly simulating typical failure modes of non-conforming RC elements, infill-induced brittle failures, and introducing the effect of possible retrofit interventions to increase both the building structural capacity and the stiffness. © 2022 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license ( https://creativecommons.org/licenses/by-nc-nd/4.0 ) Peer-review under responsibility of the scientific committee of the XIX ANIDIS Conference, Seismic Engineering in Italy Keywords: Type your keywords here, separated by semicolons ; 1. Introduction Recent earthquakes that have stricken densely populated areas evidenced the huge amount of economic resources needing to be allocated to restore affected communities. To minimize damage and economic losses, efficient XIX ANIDIS Conference, Seismic Engineering in Italy Stick model for response prediction of as-built and retrofitted infilled RC frames Marco Gaetani d’Aragona a *, Maria Polese a , and Andrea Prota a a Department of Structures for Engineering and Architecture, University Federico II of Naples, Naples 80132, Italy

* Marco Gaetani d’Aragona. Tel.: +39 0817683406 E-mail address: marco.gaetanidaragona@unina.it

2452-3216 © 2022 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the scientific committee of the XIX ANIDIS Conference, Seismic Engineering in Italy

2452-3216 © 2023 The Authors. Published by ELSEVIER B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the scientific committee of the XIX ANIDIS Conference, Seismic Engineering in Italy. 10.1016/j.prostr.2023.01.136