PSI - Issue 44

Mariateresa Guadagnuolo et al. / Procedia Structural Integrity 44 (2023) 878–885 M. Guadagnuolo et al. / Structural Integrity Procedia 00 (2022) 000–000

885

8

Acknowledgements The authors are grateful Tecnolab srl, Naples, Italy for the support provided in the execution of the tests. References Aminifar, E., Akhoundi, F., Lourenço, P.B., 2022. Verification of Mechanical Properties of Historical Brick Masonry Walls with Masonry Quality Index Method in Iran, International Journal of Architectural Heritage, DOI: 10.1080/15583058.2022.2089072. ASTM C1196, 1991. Standard test method for in-situ compressive stress within solid unit masonry estimated using flat-jack measurements. ASTM C1197, 1991. Standard test method for in-situ measurement of masonry deformability properties using the flat-jack method. ASTM D4729, 2019. Standard test method for in-situ stress and modulus of deformation using flat-jack method. ASTM E494, 2015. Standard practice for measuring ultrasonic velocity in materials. Autiero, F., Ramesh, M., Azenha, M., Di Ludovico, M., Prota, A., Lourenço, P.B., 2021. Experimental analysis of lime putty and pozzolan-based mortar for interventions in archaeological sites. Mater Struct 54, 148 (2021). https://doi.org/10.1617/s11527-021-01746-2. Binda, L., Saisi, A., Tiraboschi, C., 2001. Application of Sonic Tests to the Diagnosis of Damage and Repaired Structures", NDT&E International 2001, vol. 34, n. 2, pp. 123-138. Binda, L., Cantini, L., Saisi, A., Tiraboschi, C., 2007. Use of flat-jack and sonic tests for the qualification of historic masonry, Tenth North American Masonry Conference 10NAMC, St. Louis, Missouri, USA, 3rd-6th June 2007, pp. 791-803. Boffill, Y., Blanco, H., Lombillo, I., Villegas, L., 2020. Structural Assessment of Ancient Masonries before and during a Rehabilitation Process, International Journal of Architectural Heritage, 14:2, 299-312, DOI: 10.1080/15583058.2018.1539784. Borri, A., Castori, G., Corradi, M., De Maria, A., 2015. A method for the analysis and classification of historic masonry. Bull. Earthq. Eng., 13, 2647–2665. Borri A, Corradi M., De Maria A., 2020. The failure of masonry walls by Disaggregation and the Masonry Quality Index, heritage, 3, 1162-1198, doi:10.3390/heritage3040065 Boschi, S., Bernardini, C., Vignoli, A., 2021. The Tuscany Masonry Database Website. Heritage, 4, https://doi.org/10.3390/heritage4010014. CEN European Committee for Standardization, 2000. Non-destructive testing—Ultrasonic examination, Belgium, Brussels. D’Amato, M., Luchin, G., De Matteis, G., 2022: A Preliminary Study on Properties of A Weak Units–Strong Mortar Masonry: The Case Study of Matera Tufo Masonry (Italy), International Journal of Architectural Heritage, doi: 10.1080/15583058.2021.2015641. D'Ayala, D. F., Paganoni, S., 2011. Assessment and analysis of damage in L'Aquila historic city centre after 6th April 2009. Bulletin of Earthquake Engineering 9 (1):81–104. doi:10.1007/ s10518-010-9224-4. Epperson G.S., Abrams D.P., 1989. Non destructive evaluation of masonry buildings, Advanced Construction Technology Center, Doc. N. 89-26 03, Urbana Illinois, October. Facconi, L., Lucchini, S., Minelli, F., Grassi, B., Pilotelli, M., Plizzari, G.A., 2021. Innovative Method for Seismic and Energy Retrofitting of Masonry Buildings, Sustainability 13, no. 11: 6350. https://doi.org/10.3390/su13116350 Fanale, L., Galeota, D., Pietrucci, A., 2017. Application of nondestructive evaluation test method for Italian masonry: Masonry quality index (MQI) method. 13 th Canadian Masonry Symposium, Halifax, Canada, June 4-7. Felicetti, R., Gattesco, N., 1998. A penetration test to study the mechanical response of mortar in ancient masonry buildings, Mater. Struct. 31, 350–356. Frunzio, G., Di Gennaro, L., Guadagnuolo, M., 2019. Palazzo Ducale in Parete: remarks on code provisions, International Journal of Masonry Research and Innovation, 4, 1-2, 159-173, doi.org/10.1504/IJMRI.2019.096826. Guadagnuolo, M., Faella, G, Donadio, A., Ferri, L, 2014. Integrated evaluation of the Church of S.Nicola di Mira: Conservation versus safety, NDT & E International, Elsevier, ISSN:0963-8695. Guadagnuolo, M.; Faella, G., 2020. Simplified Design of Masonry Ring-Beams Reinforced by Flax Fibers for Existing Buildings Retrofitting. Buildings, 10, 12, doi.org/10.3390/buildings10010012.(ISSN 2075-5309) Guadagnuolo, M.; Aurilio, M.; Basile, A.; Faella, G., 2020. Modulus of Elasticity and Compressive Strength of Tuff Masonry: Results of a Wide Set of Flat-Jack Tests, Buildings, 10, 84, doi.org/10.3390/buildings10050084. Liberatore, D., Masini, N., Sorrentino, L., Racina, V., Sileo, M., AlShawa, O., Frezza, L., 2016. Static penetration test for historical masonry mortar, Construction and Building Materials, 122, Pages 810-822, https://doi.org/10.1016/j.conbuildmat.2016.07.097. Monaco, M, Aurilio, M, Tafuro, A, Guadagnuolo, M. 2021. Sustainable Mortars for Application in the Cultural Heritage Field, Materials, 14(3), 598, doi: 10.3390/ma14030598. NTC, 2018. Ministero delle Infrastrutture e dei Trasporti, Norme Tecniche per le Costruzioni, D.M. 17 January 2018, Official Bulletin n. 42, 20 February 2018, in Italian. Pinto, A. P. F., B. S. da Fonseca, and D. Vaz Silva. 2021. Mechanical characterisation of historical rubble stone masonry and its correlation with the masonry quality assessment. Construction and Building Materials 281:122168. doi:10.1016/ j.conbuildmat.2020.122168. Pirchio, D., Walsh, K.Q., Kerr, E., Giongo, I., Giaretton, M., Weldon, B.D., Ciocci, L., Sorrentino, L., 2022. An aggregated non-destructive testing (NDT) framework for the assessment of mechanical properties of unreinforced masonry Italian medieval churches, Construction and Building Materials, Volume 342, Part B, ISSN 0950-0618, https://doi.org/10.1016/j.conbuildmat.2022.128041. Riva G., Bettio C., Modena C., 1998. Valutazioni quantitative di caratteristiche meccaniche di muratura in pietra esistenti mediante prove non distruttive”, Materiali e Strutture, “L'ERMA” di Bretschneider Ed., n° 1. UNI EN 12504-2:2021. Prove sul calcestruzzo nelle strutture - Parte 2: Prove non distruttive - Determinazione dell'indice sclerometrico, in Italian.