PSI - Issue 44

Dario De Domenico et al. / Procedia Structural Integrity 44 (2023) 633–640 Dario De Domenico et al. / Structural Integrity Procedia 00 (2022) 000–000

640

8

authors’ opinion, the proposed procedure, characterized by low computational cost and reasonably few material parameters to be calibrated, can be very helpful for bridge management companies by rapidly providing a preliminary outlook of the structural health conditions of corroded bridge piers as well as of the residual seismic safety margins whenever a clear corrosion state is identified through visual inspection and/or experimental tests. Acknowledgements The authors express their gratitude to the Italian High Council of Public Works (CC.SS.LL.PP.) and the Network of University Laboratories of Seismic Engineering (RELUIS). The results of this study were achieved in the national agreement for implementing the agreement pursuant to art. 15 law 7 August 1990, No. 241 between the Superior Council of Public Works and RELUIS. References Computers and Structures Inc., 2016. CSi Analysis Reference Manual for SAP2000®. Berkeley, CA, USA. Coronelli, D., & Gambarova, P., 2004. Structural assessment of corroded reinforced concrete beams: modeling guidelines. Journal of structural engineering, 130(8), 1214-1224. Cristofaro, M. T., Viti, S., & Tanganelli, M., 2020. New predictive models to evaluate concrete compressive strength using the SonReb method. Journal of Building Engineering, 27, 100962. De Domenico, D., Messina, D., & Recupero, A., 2022. Quality control and safety assessment of prestressed concrete bridge decks through combined field tests and numerical simulation. Structures 39, 1135-1157. De Domenico, D., Messina, D., & Recupero, A., 2021. A Combined Experimental-Numerical Framework for Assessing the Load-Bearing Capacity of Existing PC Bridge Decks Accounting for Corrosion of Prestressing Strands. Materials, 14(17), 4914. Dewar, J., Collis, L., Llewellin, J., Murphy, W., Plowman, J.M., Warren, P.A., et al., 1987. Concrete core testing for strength. Technical Report n.11 of a Concrete Society Working Party. London, U.K. Di Leo, A., Pascale, G., 1994. Prove non distruttive sulle costruzioni in cemento armato. G Delle Prove Non Distruttive Monit Diagnostica 4. Di Sarno, L., & Pugliese, F., 2020. Numerical evaluation of the seismic performance of existing reinforced concrete buildings with corroded smooth rebars. Bulletin of Earthquake Engineering, 18(9), 4227-4273. Domaneschi, M., De Gaetano, A., Casas, J. R., & Cimellaro, G. P., 2020. Deteriorated seismic capacity assessment of reinforced concrete bridge piers in corrosive environment. Structural Concrete, 21(5), 1823-1838. European Committee for Standardization. Eurocode 8: Design of structures for earthquake resistance—Part 1: General rules, seismic actions and rules for buildings. EN 1998-1:2004+A1:2013. Brussels, Belgium: 2004. European Committee for Standardization, 2005. Eurocode 8 — Design of structures for earthquake resistance —Part 2: Bridges. EN 1998 2:2005+A2:2011. Brussels, Belgium. Gašparik, J., 1992. Prove Non Distruttive nell’edilizia (in Italian). Quad Didatt Assoc Ital Prove Non Distruttive (AIPnD), Brescia. Guo, A., Li, H., Ba, X., Guan, X., & Li, H., 2015. Experimental investigation on the cyclic performance of reinforced concrete piers with chloride-induced corrosion in marine environment. Engineering Structures, 105, 1-11. Iervolino, I., Galasso, C., & Cosenza, E., 2010. REXEL: computer aided record selection for code-based seismic structural analysis. Bulletin of Earthquake Engineering, 8(2), 339-362. Imperatore, S., Rinaldi, Z., & Drago, C., 2017. Degradation relationships for the mechanical properties of corroded steel rebars. Construction and Building Materials, 148, 219-230. Meda, A., Mostosi, S., Rinaldi, Z., & Riva, P., 2014. Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns. Engineering Structures, 76, 112-123. Pelle, A., Briseghella, B., Bergami, A. V., Fiorentino, G., Giaccu, G. F., Lavorato, D., ... & Nuti, C., 2022. Time ‐ dependent cyclic behavior of reinforced concrete bridge columns under chlorides ‐ induced corrosion and rebars buckling. Structural Concrete, 23(1), 81-103. RILEM NDT 4, 1993. Recommendation for in Situ Concrete Strength Determination by Methods, Combined Non-destructive, Compendium of RILEM Technical Recommendations. London, U.K. Tubaldi, E., Scozzese, F., De Domenico, D., & Dall'Asta, A., 2021. Effects of axial loads and higher order modes on the seismic response of tall bridge piers. Engineering Structures, 247, 113134. Verderame, G.M., Ricci, P., Esposito, M., Sansiviero, F. 2011, Le caratteristiche meccaniche degli acciai impiegati nelle strutture in c.a. realizzate dal 1950 al 1980. XXVI Convegno Naz. AICAP, p. 1-8. Yang, S. Y., Song, X. B., Jia, H. X., Chen, X., & Liu, X. L., 2016. Experimental research on hysteretic behaviors of corroded reinforced concrete columns with different maximum amounts of corrosion of rebar. Construction and Building Materials, 121, 319-327. Zeng, C., Zhu, J. H., Xiong, C., Li, Y., Li, D., & Walraven, J., 2020. Analytical model for the prediction of the tensile behaviour of corroded steel bars. Construction and Building Materials, 258, 120290.