PSI - Issue 41

Victor Rizov et al. / Procedia Structural Integrity 41 (2022) 115–124 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

124

10

Chikh, A., 2019. Investigations in static response and free vibration of a functionally graded beam resting on elastic founda tions. Frattura ed Integrità Strutturale 14, 115-126. Finot, M., Suresh, S., 1996, Small and large deformation of thick and thin-film multilayers: effect of layer geometry and compositonal gradients. J Mech Phys Solids 44, 683-721. Freund, L.B., 1995, The stress distribution and curvature of a general compositionally graded semiconductor layer. J. Cryst. Growth 132 341-344. Kim, J.S., Paik, K.W., Oh, S.H., 1999, The Multilayer- Modified Stoney’s Formula for Laminated Polymer Composites on a Silicon Substrate . J. Appl. Phys. 86, 5474 – 5479. Malzbender, J., 2003, Mechanical and thermal stresses in multilayered materials. Journal of applied physics 95, 1780-1782. Marae Djouda, J., Gallittelli , D., Zouaoui, M., Makke, A., Gardan , J., Recho, N., Crépin, J., 2019. Local scale fracture characterization of an advanced structured material manufactured by fused deposition modeling in 3D printing, Frattura ed Integrità Strutturale, 14, 534-540. Markov, I., Dinev, D., 2005, Theoretical and experimental investigation of a beam strengthened by bonded composite strip. Reports of International Scientific Conference VSU’2005. Mušálek, R., Kovářík, O., Matějíček, J., 2010, In -situ observation of crack propagation in thermally sprayed coatings. Surface & Coatings Technology 205, 1807 – 1811. Nagaral, M., Nayak, P. H., Srinivas, H. K., Auradi, V., 2019. Characterization and Tensile Fractography of Nano ZrO2 Reinforced Copper-Zinc Alloy Composites. Frattura ed Integrità Strutturale 13, 370-376. Rizov, V.I., 2017. Analysis of longitudinal cracked two-dimensional functionally graded beams exhibiting material non-linearity. Frattura ed Integrità Strutturale 41, 498-510. Rizov, V.I., 2018. Analysis of cylindrical delamination cracks in multilayered functionally graded non-linear elastic circular shafts under combined loads, Frattura ed Integrità Strutturale 46, 158-17. Rizov, V.I., 2019. Influence of material inhomogeneity and non-linear mechanical behaviour of the material on delamination in multilayered beams. Frattura ed Integrità Strutturale 47, 468-481. Rizov, V., Altenbach, H., 2020. Longitudinal fracture analysis of inhomogeneous beams with continuously varying sizes of the cross-section along the beam length, Frattura ed Integrità Strutturale 53, 38-50. Rizov, V.I, 2020. Longitudinal fracture analysis of continuously inhomogeneous beam in torsion with stress relaxation, Procedia Structural Integrity 28, 1212 – 1225. Rizov , V.I., 2021. Delamination analysis of multilayered beams exhibiting creep under torsion, Coupled Systems Mechanics 10, 317-331. Saidi, H., Sahla, M., 2019. Vibration analysis of functionally graded plates with porosity composed of a mixture of Aluminum (Al) and Alumina (Al2O3) embedded in an elastic medium. Frattura ed Integrità Strutturale 13, 286-299. Yu, J- H., Guo, S., Gillard, D. A., 2003, Bimaterial curvature measurements for CTE of adhesives: optimization and modelling. J Adhes Sci Technol 17, 149-164.