PSI - Issue 41

Christos F. Markides et al. / Procedia Structural Integrity 41 (2022) 351–360 Christos F. Markides et al. / Structural Integrity Procedia 00 (2019) 000 – 000

360 10

Kourkoulis, S.K., Markides, Ch.F., 2014. Stresses and displacements in a circular ring under parabolic diametral compression. International Journal of Rock Mechanics and Mining Science 71, 272–292. Liu, Y.I., Dai, F., Xu, N., Zhao, T., Feng, P., 2018. Experimental and numerical investigation on the tensile fatigue properties of rocks using the cyclic flattened Brazilian disc method. Soil Dynamics and Earthquake Engineering 105, 68 – 82. Markides, Ch.F., Kourkoulis, S.K., 2012. The stress field in a standardized Brazilian disc: the influence of the loading type acting on the actual contact length. Rock Mechanics and Rock Engineering 45(2), 145 – 158. Markides, Ch.F., Kourkoulis, S.K., 2020. Mathematical formulation of an analytic approach to the stress field in a flattened Brazilian disc. Procedia Structural Integrity 28(1), 710 – 719. Mellor, M, Hawkes, I., 1971. Measurement of tensile strength by diametral compression of discs and annuli. Engineering Geology 5(3), 173 – 225. Muskhelishvili, N. I., 1963. Some basic problems of the mathematical theory of elasticity, Noordhoff, Groningen, The Netherlands. Ren, H., Song, S., & Ning, J., 2022. Investigation into the damage mechanism of concrete in the Brazilian test and flattened Brazilian test through the moment tensor. Engineering Fracture Mechanics, 262, 108093. Wang, M., Cao, P., 2016. Numerical analysis of flattened Brazilian disc test based on the cusp catastrophe theory. Mathematical Problems in Engineering 4517360. Wang, Q.Z., Feng, F., Ni, M., Gou, X.P., 2011. Measurement of mode I and mode II rock dynamic fracture toughness with cracked straight through flattened Brazilian disc impacted by split Hopkinson pressure bar. Engineering Fracture Mechanics 78(12), 2455 – 2469. Wang, Q.Z., Jia, X.M., Kou, S.Q., Zhang, Z.X., Lindqvist, P.-A., 2004. The flattened Brazilian disc specimen used for testing elastic modulus, tensile strength and fracture toughness of brittle rocks: analytical and numerical results. International Journal of Rock Mechanics & Mining Sciences 41(2), 245 – 253. Wang, Q.Z., Li, W., Xie, H.P., 2009. Dynamic split tensile test of flattened Brazilian disc of rock with SHPB setup. Mechanics of Materials 41(3), 252 – 260. Wang, Q.Z., Wu, L.Z. 2004. The flattened Brazilian disc specimen used for determining elastic modulus, tensile strength and fracture toughness of brittle rocks: experimental results. International Journal of Rock Mechanics and Mining Sciences, 41(3), 26 – 30. Wang, Q.Z., Xing, L., 1999. Determination of fracture toughness K IC by using the flattened Brazilian disk specimen for rocks. Engineering Fracture Mechanics 64(2), 193 – 201. Wang, Q.Z., Zhang, S., Xie, H.P., 2010. Rock dynamic fracture toughness tested with holed-cracked flattened Brazilian discs diametrically impacted by SHPB and its size effect. Experimental Mechanics 50(7), 877 – 885. Wu, S., Ma, J., Cheng, Y., Xu, M., Huang, X., 2018. Numerical analysis of the flattened Brazilian test: Failure process, recommended geometric parameters and loading conditions. Engineering Fracture Mechanics 204, 288 – 305. Yan, Z., Dai, F., Liu, Y., Wei, M., You, W., 2021. New insights into the fracture mechanism of flattened Brazilian disc specimen using digital image correlation. Engineering Fracture Mechanics, 252, 107810. Yaqin, A., Qaidahiyani, N.F., 2021. The effect of loading rate on fracture toughness of concrete using type I fracture toughness test flattened Brazilian disc (FBD) mode. IOP Conference Series: Earth and Environmental Science 921(1), 012072. Yu, H., Andersen, D. H., He, J., Zhang, Z., 2021. Is it possible to measure the tensile strength and fracture toughness simultaneously using flattened Brazilian disk? Engineering Fracture Mechanics, 247, 107633. Zhang, Y., Ou, C., Liu, H., Lu, J., Cheng, C., He, J., 2021. Experimental and numerical study on the dynamic fracture of flattened Brazilian discs with prefabricated cracks. Engineering Fracture Mechanics, 254, 107885.