PSI - Issue 41

in

Andrea Spagnoli et al. / Procedia Structural Integrity 41 (2022) 656–663 Spagnoli et al. / Structural Integrity Procedia 00 (2022) 000–000

663

8

References

Anderson, P.S., 2018. Making a point: shared mechanics underlying the diversity of biological puncture. Journal of Experimental Biology 221, jeb187294. Bezek, L.B., Chatham, C.A., Dillard, D.A., Williams, C.B., 2022. Mechanical properties of tissue-mimicking composites formed by material jetting additive manufacturing. Journal of the Mechanical Behavior of Biomedical Materials 125, 104938. Bonn, D., 1998. Delayed Fracture of an Inhomogeneous Soft Solid. Science 280, 265–7. doi: 10.1126/science.280.5361.265 . Brighenti, R., Spagnoli, A., Carpinteri, A., Artoni, F., 2017a. Defect tolerance at various strain rates in elastomeric materials: An experimental investigation. Engineering Fracture Mechanics 183, 79–93. doi: 10.1016/j.engfracmech.2017.05.001 . Brighenti, R., Vernerey, F.J., Artoni, F., 2017b. Rate-dependent failure mechanism of elastomers. International Journal of Mechanical Sciences 130, 448–57. doi: 10.1016/j.ijmecsci.2017.05.033 . Chen, C., Wang, Z., Suo, Z., 2017. Flaw sensitivity of highly stretchable materials. Extreme Mechanics Letters 10, 50–7. doi: 10.1016/j.eml. 2016.10.002 . DiMaio, S., Salcudean, S., 2003. Needle insertion modeling and simulation. IEEE Transactions on Robotics and Automation 19, 864–75. doi: 10. 1109/TRA.2003.817044 . Fregonese, S., Bacca, M., 2021. Piercing soft solids: A mechanical theory for needle insertion. Journal of the Mechanics and Physics of Solids 154, 104497. Frick, T.B., Marucci, D.D., Cartmill, J.A., Martin, C.J., Walsh, W.R., 2001. Resistance forces acting on suture needles. Journal of Biomechanics 34, 1335–40. doi: 10.1016/S0021-9290(01)00099-9 . Goh, S.M., Charalambides, M.N., Williams, J.G., 2005. On the mechanics of wire cutting of cheese. Engineering Fracture Mechanics 72, 931–46. doi: 10.1016/J.ENGFRACMECH.2004.07.015 . Johnson, K.L., 1987. Contact Mechanics. Cambridge University Press. Kundanati, L., Guarino, R., Menegon, M., Pugno, N.M., 2020. Mechanics of snake biting: Experiments and modelling. Journal of the mechanical behavior of biomedical materials 112, 104020. McGorry, R.W., Dowd, P.C., Dempsey, P.G., 2003. Cutting moments and grip forces in meat cutting operations and the e ff ect of knife sharpness. Applied Ergonomics 34, 375–82. doi: 10.1016/S0003-6870(03)00041-3 . Oldfield, M., Dini, D., Giordano, G., Rodriguez y Baena, F., 2013. Detailed finite element modelling of deep needle insertions into a soft tissue phantom using a cohesive approach. Computer Methods in Biomechanics and Biomedical Engineering 16, 530–43. doi: 10.1080/10255842. 2011.628448 . Shergold, O.A., Fleck, N.A., 2004. Mechanisms of deep penetration of soft solids, with application to the injection and wounding of skin. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 460, 3037–58. doi: 10.1098/rspa.2004.1315 . Shergold, O.A., Fleck, N.A., 2005. Experimental Investigation Into the Deep Penetration of Soft Solids by Sharp and Blunt Punches, With Application to the Piercing of Skin. Journal of Biomechanical Engineering 127, 838–48. doi: 10.1115/1.1992528 . Spagnoli, A., Terzano, M., Brighenti, R., Artoni, F., Ståhle, P., 2018. The fracture mechanics in cutting: a comparative study on hard and soft polymeric materials. International Journal of Mechanical Sciences 148, 554–564. Ståhle, P., Spagnoli, A., Terzano, M., 2017. On the fracture processes of cutting. Procedia Structural Integrity 3, 468–476. Takabi, B., Tai, B.L., 2017. A review of cutting mechanics and modeling techniques for biological materials. Medical Engineering & Physics 45, 1–14. doi: 10.1016/J.MEDENGPHY.2017.04.004 . Terzano, M., Dini, D., Rodriguez y Baena, F., Spagnoli, A., Oldfield, M., 2020. An adaptive finite element model for steerable needles. Biome chanics and Modeling in Mechanobiology 19, 1809–1825. Terzano, M., Spagnoli, A., Dini, D., Forte, A.E., 2021. Fluid–solid interaction in the rate-dependent failure of brain tissue and biomimicking gels. Journal of the Mechanical Behavior of Biomedical Materials 119, 104530. Terzano, M., Spagnoli, A., Ståhle, P., 2018. A fracture mechanics model to study indentation cutting. Fatigue & Fracture of Engineering Materials & Structures 41, 821–30. doi: 10.1111/ffe.12750 . Williams, J.G., 2015. Stress at a distance fracture criteria and crack self-blunting in rubber. International Journal of Non-Linear Mechanics 68, 33–6. doi: 10.1016/j.ijnonlinmec.2014.06.008 .