PSI - Issue 41

Mohammad Reza Khosravani et al. / Procedia Structural Integrity 41 (2022) 664–669 Mohammad Reza Khosravani et al. / Procedia Structural Integrity 00 (2022) 000–000

669

6

Acknowledgements

This work as part of the project “Smart Production Design Center” (SmaP) is funded by the European Regional Development Fund (ERDF) under the program OP EFRE NRW 2014-2020 ( EFRE - 0200545 ).

References

ASTM F2792-12 Standard Terminology for Additive Manufacturing Technologies, American Society for Testing Materials, West Conshohocken, USA. 2012. ASTM D5766-18, Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates. American Society for Testing Materials, West Conshohocken, USA. 2018. Duranoviic, M., Madzarevic, M., Ivkovic, B., Ibric, S., Cvijic, S., 2021. The evaluation of the e ff ect of di ff erent superdisintegrants on the drug release from FDM 3D printed tablets through di ff erent applied strategies: In vitro-in silico assessment. International Journal of Pharmaceutics 610, 121194. Ekoi, E.J., Dickson, A.N., Dowling, D.P., 2021. Investigating the fatigue and mechanical behaviour of 3D printed woven and nonwoven continuous carbon fibre reinforced polymer (CFRP) composites. Composites Part B 212, 108704 (2021). Gibson, I., Rosen, D., Stucker, B., 2015. Additive Manufacturing Technologies. Springer, pp.498. Karpenko, O., Oterkus, S., Oterkus, E., 2022. Peridynamic analysis to investigate the influence of microstructure and porosity on fatigue crack propagation in additively manufactured Ti6Al4V. Engineering Fracture Mechanics 261, 108212. Khosravani, M.R., Reinicke, T., 2020. E ff ects of raster layup and printing speed on strength of 3D-printed structural components. Procedia Structural Integrity 28, 720–725. Khosravani, M.R., Berto, F., Ayatollahi, M.R., Reinicke, T., 2022. Characterization of 3D-printed PLA parts with di ff erent raster orientations and printing speeds. Scientific Reports, 12, 1016 Khosravani, M.R., Reinicke, T., 2021a. Experimental characterization of 3D-printed sound absorber. European Journal of Mechanics - A / Solids 89, 104304. Khosravani, M.R., Reinicke, T., 2021b. Fracture behavior of intact and defected 3D-printed parts. Procedia Structural Integrity 31, 105–110. Li, J., Yang, Z., Qian, G., Berto, F., 2022. Machine learning based very-high-cycle fatigue life prediction of Ti-6Al-4V alloy fabricated by selective laser melting. International Journal of Fatigue 158, 106764. Li, B., Zhnag, S., Zhang, L., Gao, Y., Xuan, F., 2022. Strain sensing behavior of FDM 3D printed carbon black filled TPU with periodic configura tions and flexible substrates. Journal of Manufacturing Processes 74, 283–295. Ma, Z., Chen, J., Yang, Q., Li, Z., Su, X., 2021. Progressive fracture analysis of the open-hole composite laminates: experiment and simulation. Composite Structures 262, 113628. Martinez, V., Cicero, S., Arroyo, B., 2021. E ff ect of graphene on the fracture behaviour of 3D printed PLA SENB speccimens. Procedia Structural Integrity 31, 89–96. Parada, L.R., Mayuet, P., Gamez, A.J., 2019. Industrial product design: study of FDM technology for the manufacture of thermoformed prototypes. Procedia Manufacturing 41, 587–593. Polyzos, E., Katalagariankis, A., Van Hemelrijck, D., Pyl, L., 2021. Delamination analysis of 3D-printed nylon reinforced with continuous carbon fibers. Additive Manufacturing 46, 102144. Pugliese, R., Beltrami, B., Regondi, S., Lunetta, C., 2021. Polymeric biomaterials for 3D printing in medicine: An overview. Annals of 3D Printed Medicine 2, 100011. Reddy, K.V:P., Mirzana, I.M., Reddy, A.K. 2018. Application of additive manufacturing technology to an aerospace component for better trade o ff ’s. Materials Today: Proceedings 5, 3895–3902. Verma, S., Sharma, N., Kango, S., Sharma, S., 2021. Developments of PEEK (Polyetheretherketone) as a biomedical material: A focused review. European Polymer Journal 147, 110295. Wu, C., Lin, P., Kumar, S., Chen, J., 2021. Long-term open-hole tensile creep properties of self-reinforced PET composites measured by digital image correlation. Materials Chemistry and Physics 278, 125633. Yu, Y.Z., Lu, J.R., Liu, J. 2017. 3D printing for functional electronics by injection and package of liquid metals into channels of mechanical structures. Materials and Design 122, 80-89. Zhang, H., Li, A., Wu, J., Sun, B., Wang, C., Yang, D., 2022. E ff ectiveness of fibre placement in 3D printed open-hole composites under uniaxial tension. Composites Science and Technology 220, 109269. Zolfagharian, A., Khosravani, M.R., Kaynak, A., 2020. Fracture resistance analysis of 3D-printed polymers. Polymers 12, 1–18.