PSI - Issue 41

Jelena Djokikj et al. / Procedia Structural Integrity 41 (2022) 670–679 Author name / Structural Integrity Procedia 00 (2019) 000–000

679

10

Liu, Z., Wang, Y., Wu, B., Cui, C., Guo, Y. and Yan, C., 2019. A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts. The International Journal of Advanced Manufacturing Technology , 102(9), pp.2877-2889. Maloch, J., Hnátková, E., Žaludek, M., Krátký, P., 2018. Effect of processing parameters on mechanical properties of 3D printed samples. In Materials Science Forum , 919, pp. 230-235. Trans Tech Publications Masood, S.H., Mau, K. and Song, W.Q., 2010. Tensile properties of processed FDM polycarbonate material. In Materials Science Forum , 654, pp. 2556-2559. Trans Tech Publications Ltd. Özen, A., Auhl, D., Völlmecke, C., Kiendl, J. and Abali, B.E., 2021. Optimization of manufacturing parameters and tensile specimen geometry for fused deposition modeling (FDM) 3D-printed PETG. Materials , 14(10), p.2556. Patel, D.M., 2017. Effects of infill patterns on time, surface roughness and tensile strength in 3D printing. International Journal of Engineering Devevelopment & Research , 5(3), pp.566-569. Rodríguez-Panes, A., Claver, J. and Camacho, A.M., 2018. The influence of manufacturing parameters on the mechanical behaviour of PLA and ABS pieces manufactured by FDM: A comparative analysis. Materials , 11(8), p.1333. Shubham, P., Sikidar, A. and Chand, T., 2016. The influence of layer thickness on mechanical properties of the 3D printed ABS polymer by fused deposition modeling. In Key engineering materials , 706, pp. 63-67. Trans Tech Publications Ltd. Thompson, M.K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R.I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B. and Martina, F., 2016. Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints. CIRP annals , 65(2), pp.737-760. Vălean, C., Marșavina, L., Mărghitaș, M., Linul, E., Razavi, J. and Berto, F., 2020. Effect of manufacturing parameters on tensile properties of FDM printed specimens. Procedia Structural Integrity , 26, pp.313-320. Warnung, L., Estermann, S.J. and Reisinger, A., 2018. Mechanical properties of Fused Deposition Modeling (FDM) 3D printing materials. RTejournal-Fachforum für Rapid Technologien, 2018(1).