PSI - Issue 38

250 Hamza Abbad El Andaloussi et al. / Procedia Structural Integrity 38 (2022) 238–250 Hamza Abbad El Andaloussi, Luc Mouton, Firas Sayed Ahmad, Xabier Errotabehere, Stéphanie Mahérault-Mougin, Stéphane Paboeuf/ Structural Integrity Procedia 00 (2021) 000 – 000 13 8. References [1] L. Mouton, S. Paboeuf, X. Errotabehere, F. Sayed-Ahmad (June 2018). Enhanced reliability of structural bonding: an advanced solution of repair for corrosion onboard offshore units. Proceedings of the 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018). [2] C. Paillusseau, X. Errotabehere, F. Sayed-Ahmad, L. Mouton (2018). Gamechanging structural repair solution for FPSO hulls with no hot work. Society of Petroleum Engineers (SPE-190897-MS). [3] NR467 – Bureau Veritas Rules for the classification of steel ships, Part B, Chapter7, Section 4: “Fatigue Check of structural details” (July 2018). [4] NI611 – Bureau Veritas Guidelines for fatigue assessment of steel ships and offshore units (September 2016). [5] DNVGL-RP-C203 – Fatigue design of offshore steel structures (April 2016). [6] Broughton W.R., Mera R.D., Hinopoulos G. (1999) Cyclic fatigue testing of adhesive joint – Test method and assessment. Project PAJ3. NPL Report. [7] Mazumda S.K., Mallick P.K. (1998) Static and fatigue behavior of adhesive joints in SMC-SMC composites. Polymer composites. Vol.19, No.2. [8] Azari S. Near-threshold fatigue of adhesive joint: effect of mode ratio, bond strength and bondline thickness. PhD Thesis. University of Toronto (2010). [9] DNVGL-RP-C301 – Design, Fabrication, operation and qualification of bonded repair of steel structures. (July 2015) [10] ISO12107 - Metallic materials — Fatigue testing — Statistical planning and analysis of data. (2012) [11] G. Parmentier, M. Huther (2013). S-N curves for welded, non-welded or improved welded details of marine structures, Procedia Engineering 66 (2013) 49-61, 5th Fatigue Design Conference (Fatigue Design 2013). [12] NI611 – Bureau Veritas Guidelines for fatigue assessment of steel ships and offshore units, Revision 1 (To be published in July 2019).[13] Cognard J.Y., Davies P., Gineste B., Sohier L. (2005) Development of an improved adhesive test method for composite assembly design. Composites Science and Technology. 65 (3-4): 359-368.