PSI - Issue 37

Mohammed Zwawi et al. / Procedia Structural Integrity 37 (2022) 1057–1064 Mohammed Zwawi/ Structural Integrity Procedia 00 (2019) 000 – 000

1064

8

Algarni, M. (2019). Notch Factor Correction Using Stress Triaxiality of Plane-Stress State in High-Cycle Fatigue. International Journal of Fatigue, 128, 105204. Algarni, M., & Ghazali, S. (2021) . Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG’s Mechanical Properties to FDM Printing Process Parameters. Crystals, 11(8). https://doi.org/10.3390/cryst11080995 Benkar, C. N., & Wankhade, D. N. A. (2014). Finite element stress analysis of crane hook with different cross sections. International Journal For Technological Research In Engineering, 1(9), 868-872. Bergaley, A., & Purohit, A. (2013). Structural analysis of crane hook using finite element method. International Journal of Science and Modern Engineering, 1, 3-7. Bhagyaraj, G., Suryaprakash, K., Rao, K. S., & Cam, C. A. D. (2017). Crane hook design and analysis. Int. Res. J. Eng. Technol, 4(9), 61-65. Devaraj, A. (2015). Design of a crane hook of different materials and stress analysis using ANSYS workbench. International Journal for Research in Applied Science & Engineering Technology, 3(7), 310-314. Gerdemeli, I., Kurt, S., & Deliktas, O. (2010). Finite element analysis of the tower crane. 14th International Research/Expert Conference, Trends in the Development Machinery and Associated Technology" TMT, Gopichand, M. A., Lakshmi, M. R. V. S., &Maheshkrishna, M. B. (2013). Optimization of design parameters for crane hook using Taguchi method. International Journal of Innovative Research in Science, Engineering and Technology, 2, 7780-7784. Kumhar, V., Talapatra, P. K., & Sahu, N. K. (2015). Design and analysis of crank hook trapezoidal cross section using finite element analysis. VSRD International Journal of Mechanical, Civil, Automobile and Production Engineering, 5(5), 89-94. Mehendale, S. A., & Wankhade, S. R. (2016). Design and analysis of EOT crane hook for various cross sections. Int. J. Curr. Eng. Sci. Res, 3(12), 53-58. Mwema, F. M., & Akinlabi, E. T. (2020). Basics of Fused Deposition Modelling (FDM). In Fused Deposition Modeling (pp. 1-15). Springer. Ragan, S. (2013). Plastics for 3D printing. MAKE: Ultimate Guide to 3D Printing, 22. Rajurkar, G. U., Bhope, D., & Dv, K. (2013). SD: Investigation of stresses in crane hook by FEM. Int. J. Eng. Res. Technol, 2(8), 117-122. Ratnakumar, G. E. V., Kumar, B. J., & Prasad, K. (2013). Design and stress analysis of various cross section of hook. Int J Innov Eng Technol, 90 97. Reddy, M. A., Krishnaveni, M. N. V., Nagaraju, B., &RajaRoy, M. (2015). Static analysis of crane hook with I-section and T-section using ANSYS. International Journal of Engineering Trends and Technology (IJETT), 26(2). Sahu, G. N., & Yadav, N. (2013). Design and Stress Analysis of various cross section of Hook. International Journal of Modern Engineering Research. Sahu, S., Dewangan, R., Patnaik, M., & Yadav, N. (2012). Study of crane hook having trapezoidal section by finite element method & design of experiments. International Journal of Modern Engineering Research, 2(4), 2779-2781. Sai Krishna, E., & Kumar, D. S. (2018). S.: Design and analysis of crane hook with different materials. Int. J. Mech. Eng. Technol, 9(4), 786-791. Shaban, M., Mohamed, M. I., Abuelezz, A. E., & Khalifa, T. (2013). Determination of stress distribution in Crane Hook by caustic. International Journal of Innovative Research in Science, Engineering and Technology, 2(5), 8. Singh, A., & Rohilla, V. (2015). Optimization and Fatigue Analysis of a Crane Hook Using Finite Element Method. International Journal of Recent advances in Mechanical Engineering, 4, 31-43. Singh, P., Jain, O., Yadav, P., & Sharma, S. K. (2021). Analysing Crane Hook of Different Cross Sections and Different Materials. In Recent Advances in Mechanical Engineering (pp. 575-580). Springer. Uddanwadiker, R. (2011). Stress analysis of crane hook and validation by photo-elasticity. Engineering, 3(9), 935. Yang, L., Li, S., Li, Y., Yang, M., & Yuan, Q. (2019). Experimental investigations for optimizing the extrusion parameters on FDM PLA printed parts. Journal of Materials Engineering and Performance, 28(1), 169-182. Zade, M. M. R. (2017). Finite Element Analysis and Fatigue Analysis of Crane Hook with Different Materials. International Research Journal of Engineering and Technology, 4, 1429-1436.