PSI - Issue 34

Veronika M. Miron et al. / Procedia Structural Integrity 34 (2021) 65–70 Miron et al. / Structural Integrity Procedia 00 (2021) 000 – 000

70 6

However, investigating if hysteretic loss due to intrinsic viscoelastic properties of silicone elastomers leads to cumulative temperature increase large enough to change the material response towards a strain-dependent behavior could be interesting for future thermodynamic testing. Acknowledgements This work was funded as part of the project “Medical EDUcation in Surgical Aneurysm clipping (MEDUSA)” by the strategic economic- and research programme “Innovatives OÖ 2020” of the province of Upper Austria under the grant number 872604. References Abaqus, n.d. Hyperelastic behavior of rubberlike materials [WWW Document]. URL https://abaqus docs.mit.edu/2017/English/SIMACAEMATRefMap/simamat-c-hyperelastic.htm (accessed 6.3.20). Çakmak, U.D., Grestenberger, G., Major, Z., 2011. A novel test method for quantifying surface tack of polypropylene compound surfaces. Express Polym. Lett. 5, 1009 – 1016. Davoodi, E., Fayazfar, H., Liravi, F., Jabari, E., Toyserkani, E., 2020. Drop-on-demand high-speed 3D printing of flexible milled carbon fiber/silicone composite sensors for wearable biomonitoring devices. Addit. Manuf. 32. Koushki, P., Kwok, T.H., Hof, L., Wuthrich, R., 2020. Reinforcing silicone with hemp fiber for additive manufacturing. Compos. Sci. Technol. 194, 108139. Liravi, F., Toyserkani, E., 2018. Additive manufacturing of silicone structures: A review and prospective. Addit. Manuf. 24, 232 – 242. Luis, E., Pan, H.M., Bastola, A.K., Bajpai, R., Sing, S.L., Song, J., Yeong, W.Y., 2020a. 3D Printed Silicone Meniscus Implants: Influence of the 3D Printing Process on Properties of Silicone Implants. Polym. 2020, Vol. 12, Page 2136 12, 2136. Luis, E., Pan, H.M., Sing, S.L., Bajpai, R., Song, J., Yeong, W.Y., 2020b. 3D Direct Printing of Silicone Meniscus Implant Using a Novel Heat-Cured Extrusion-Based Printer. Polym. 2020, Vol. 12, Page 1031 12, 1031. Luis, G.E., Liu, H., Yeong, W.Y., 2018. Silicone 3D printing technologies and processes : a review, in: Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro ‑ AM 2018). pp. 170 – 175. Putra, K.B., Tian, X., Plott, J., Shih, A., 2020. Biaxial test and hyperelastic material models of silicone elastomer fabricated by extrusion-based additive manufacturing for wearable biomedical devices. J. Mech. Behav. Biomed. Mater. 107, 103733. Rashid, B., Detrade, M., Gilchrist, M.D., 2012. Mechanical characterization of brain tissue in compression at dynamic strain rates. J. Mech. Behav. Biomed. Mater. 10, 23 – 38. Schaffner, M., Faber, J.A., Pianegonda, L., Rühs, P.A., Coulter, F., Studart, A.R., 2018. 3D printing of robotic soft actuators with programmable bioinspired architectures. Nat. Commun. 2018 91 9, 1 – 9. Taylor, Z., Miller, K., 2004. Reassessment of brain elasticity for analysis of biomechanisms of hydrocephalus. J. Biomech. 37, 1263 – 1269.