PSI - Issue 33

Anass Gouya et al. / Procedia Structural Integrity 33 (2021) 215–220 GOUYA Anass / Structural Integrity Procedia 00 (2019) 000–000

220

6

levels. The confirmation test of the S/N ratio was based on the failure stress. The objective of the Taguchi method applied in this work is not only to improve the quality of the wire rope, but also to reduce the manufacturing cost. The optimal conditions are E=200 GPa and θ=229.19° and D=1.9mm. The simulation values of the first model are compared with the analytical values with the error of 8.30%, which is reasonable.

References

Asep, Ridwan, Ekawati Ratna, et Novitasari Ayu. 2018. « Quality Control of the Steel Wire Rod Product by Integration Lean Six Sigma and Taguchi Method ». MATEC Web of Conferences: 7. Fatoba, Olawale Samuel, Olaitan Lukman Akanji, et Abiodun Samson Aasa. « Optimization of Carburized UNS G10170 Steel Process Parameters Using Taguchi Approach and Response Surface Model (RSM) ». : 14. Jikal, Abdeljalil, Hassan Chaffoui, et Mohamed El Ghorba. 2019. « Effect of Parameters on the Mechanical Behavior of Core Strands: Experimental, Numerical and Statistical Study ». Key Engineering Materials 820: 104‑17. Jikal, Abdeljalil, Fatima Majid, Hassan Chaffou, et Mohamed El Ghorba. 2019. « Influence of Corrosion on the Mechanical Behavior of Strand of a Non-Rotating Wire Rope: Experimental Study ». Procedia Structural Integrity 18: 731‑41. Matejic, Milos, Lozica Ivanovic, Nenad Petrovic, et Nenad Kostic. « Determination of the Most Influential Factor during the Rope Winding Process around Winch Drums Using Taguchi Method ». : 6. Zhang, Jun et al. 2019. « Tribo-Fatigue Behaviors of Steel Wire Rope under Bending Fatigue with the Variable Tension ». Wear 428‑429: 154‑61.